Company News

TE Connectivity

1050 Westlakes Drive, Berwyn, PA, 19312, USA

  • 610-893-9800

General Information:
Hope-Sutton Salvador
Phone: 650-361-2160
E-mail this person

Latest New Product News from
TE Connectivity

sensors, monitors & transducers

LVDT Position Sensors are CSA listed for hazardous locations.

April 7, 2016

Constructed entirely of stainless steel with hermetically sealed sensor body and through-bore design, HLIR 750 Series provides contact-less position measurement for critical applications in gas turbines for fuel valve position feedback, vane pitch servo controls, and governor controls. Intrinsically safe units offer 4–20 mA output signal and are available in measuring ranges from ±2 to ±20 in. Maximum linearity error is ±0.25% of full range output. Read More

sensors, monitors & transducers

LVDT Position Transmitter features CANopen interface.

February 2, 2016

Equipped with CANopen interface compliant to CiA 443 for subsea instruments, Macro Sensors SSBR-937 Series can withstand deep sea environments with external pressures up to 5,000 psi and more than 1 million hours MTBF, when encased in special alloys. Sensor offers optimized repeatability, with error less than 0.01% of full range. Device is suited for elongation measurement as part of long-term finite element analysis of pipelines, derricks, moorings, and choke valves on offshore oil platforms. Read More

electrical equipment & systems, optics & photonics, sensors, monitors & transducers, test & measuring instruments

Submersible LVDT Position Transmitter serves subsea applications.

December 30, 2015

Featuring CANopen interface that complies with CiA 443 for subsea instruments, Macro Sensors SSIR 937 offers interoperable and standardized communications to network with devices from different manufacturers used on ocean floor. Transmitter withstands external pressures to 7,500 psi with MTBF of >1 million hr when encased in special alloys, and repeatability, with error of <0.01% of full range, is maintained despite offsets due to pressure and/or temperature. Movement is measured to <2 mm. Read More

electrical equipment & systems, mounting & attaching products

Hybrid Lever Connectors withstand harsh environments.

November 23, 2015

Featuring heavy-duty, environmentally sealed design, AMPSEAL 16 Connectors stand up to harsh conditions of agricultural, construction, trucking, marine, and off-highway industries. Units are 28-position connectors that feature mix of 24 size 16 contacts and 4 size 12 contacts. Connectors incorporate lever slide mechanism for mating and use mounting clips for quick, tool-less mounting. To help prevent mismating, two keying options are available. Read More

electrical equipment & systems, mounting & attaching products

Transparent Connector integrates LED for troubleshooting.

November 4, 2015

DEUTSCH DT Detector connector provides visual confirmation of power by producing glow via integrated 12 or 24 V LED to facilitate troubleshooting in areas with difficult connector visibility/accessibility. Two-way plug has transparent housing and yellow or red wedgelock. Respectively available with and without end caps, DT06-2S-SDT-CE27 and -CE28 accept size 16 DEUTSCH contacts (13 A), feature environmentally sealed design, and are compatible with PWM control. Read More

chemical processing & waste management, electrical equipment & systems, fluid & gas flow equipment

Dual Wall Heat Shrink Tubing meets UL VW-1 test requirement.

September 29, 2015

Rated for UL VW-1 flammability test specified by UL 224 standard, DWFR (dual wall, fire-retardant) heat shrink tubing comes in 14 sizes from 3&ndash;52 mm ID and is applicable to range of electrical connections and terminations. Flame-retardant polyolefin jacket and thermoplastic inner adhesive wall provide electrical insulation and mechanical protection. When properly installed, tubing shrinks to create moisture-resistant seal. Heat shrink ratios of 3:1 and 4:1 enable diverse use. Read More

chemical processing & waste management, electrical equipment & systems

Dual Wall Heat Shrink Tubing meets flammability requirements.

September 24, 2015

Rated for UL VW-1 flammability test specified by UL 224 standard, DWFR Heat Shrink Tubing features flame retardant polyolefin jacket and thermoplastic inner adhesive wall that provide electrical insulation and mechanical protection. When properly installed, tubing shrinks to create moisture-resistant seal. Available in 14 sizes from 3&ndash;52 mm ID, tubing offers heat shrink ratios of 3:1 or 4:1. All sizes provide full recovery at 125°C and can be used across operating temperatures of -40 to 110°C. Read More

optics & photonics

Fiber Distribution Panel boosts datacenter/office speed, efficacy.

July 29, 2015

QRapid incorporates Quareo physical layer management technology comprising connection point identification (CPID) for real-time visibility to network add-ons, moves, and changes. Used in central office fiber deployments, this 1 RU, 48-port or 3 RU, 144-port, rack-mountable panel features RapidReel fiber cable spool and electronics. Functionality enables user to know, in real-time, whether each front port of panel is connected and to what other equipment and port it is connected. Read More

electronic components & devices

Connector Series includes wire-to-board headers.

April 16, 2015

Rated to 20 A, wire-to-board Power Triple Lock 6.0 mm center line connectors operate up to 150°C, are V-0 rated (UL 94 V-0), and come in single-row (2, 3, 4, 5) configurations. Optional CPA (Connector Position Assurance) device helps keep connector fully mated and engaged during shipment/installation/use, while optional TPA (Terminal Position Assurance) device provides secondary locking of contact into connector housing. Design also helps reduce fretting to prevent corrosion in applications. Read More

computer hardware & peripherals, software

PHY Management Products support high-density applications.

April 3, 2015

Combining hardware and software elements with connection point identification technology, Quareo Physical Layer Management System provides state of physical network at all times. NG4access optical distribution frame, featuring Quareo technology (QNG4), offers access to high-density fiber terminations up to 3,456 fibers/frame. High-density 1RU fiber optical panel, featuring Quareo technology (QHDEP), provides 6 access trays, each serving up to 24 LC fiber connections or 8 MPO fiber connections. Read More

sensors, monitors & transducers, thermal & heating equipment

Resettable Thermal Cutoffs protect lithium batteries.

March 25, 2015

Housed in 5.8 x 3.85 x 1.15 mm package with 9 Vdc rating, Series MHP-TAM provides resettable over-temperature protection to shut down battery when fault is detected, making devices suited for ultra-thin notebooks and other portable consumer electronics. Utilizing metal hybrid PPTC technology, TCOs combine bimetal protector in parallel with polymeric positive temperature coefficient device. Series offers open temperatures from 72&ndash;90°C and 2 levels of hold currents: 6 A and 15 A at 25°C. Read More

electronic components & devices, materials & material processing, green & clean

PPTC/Zener Diode Devices protect consumer electronics.

November 5, 2014

Combining Zener diode and resettable PolySwitch PPTC device in 4.0 x 5.0 x 1.2 mm package, PolyZen ZEN056V230A16YC and ZEN056V260A16YC simultaneously protect against damage from overload, overcurrent, reverse-bias, ESD, and overtemperature events. Hybrid units offer up to 2.6 A hold-current at room temperature, ±30 kV ESD protection, and 8/20 µs pulse = 150 A overvoltage protection to help meet IEC standards. Applications include tablets, set-top boxes, hard disk drives, and DC power ports. Read More

materials & material processing

Silicon ESD Devices offer 20 kV air discharge rating.

March 28, 2014

Exhibiting ±20 kV and ±22 kV air discharge ratings, SESD Series helps designers solve pervasive protection challenge caused by charged board events. Products come in uni-directional and bi-directional configurations with input capacitance of 0.30 and 0.15 pF, respectively. Clamping voltage of less than 15 V helps facilitate fast turn-on time and minimize energy let-through to sensitive down-stream chipsets. Surge capability is 2.2 A for 4-channel array and 2.5 A for 1- and 2-channel devices. Read More

communication systems & equipment, computer hardware & peripherals, optics & photonics, test & measuring instruments

Data Converters drive 100G, 300G, and 400G active optics.

February 28, 2014

Using 25G VCSEL and PIN devices, TIA amplifier, and driver IC, Coolbit optical engines convert data from electrical signals to optical signals and drive technology behind TE 100G, 300G, and 400G active optics. Platform engines help communication systems conserve power, and QSFP28 modules perform at <1.5 W per transceiver. Optical engines enhance performance while satisfying high density and high bandwidth requirements. Read More

electrical equipment & systems, electronic components & devices

Hybrid PPTC/MOV Device features resettable design.

December 3, 2012

Combining resettable polymeric positive temperature coefficient device and thermally enhanced metal-oxide varistor into one package, 2Pro AC Device protects sensitive downstream electronics against damage from overcurrent and overvoltage events. Unit provides stability by maintaining varistor surface temperature of less than 150°C. RoHS-compliant and halogen-free, 2Pro AC Device is suitable for LED lighting, smart meters, appliances, and power supplies. Read More

computer hardware & peripherals, electrical equipment & systems

Micro USB Connector seals gap in consumer electronics.

October 1, 2012

Designed to seal gaps around opening and inside of connector shell, 8.2 x 5 x 3.8 mm splashproof micro USB connector accepts A and B type plugs and supports normal USB and USB OTG (On The Go). Molded front helps seal connector against device shell of consumer electronics, while SMD solder bracket provides additional strength from underneath connector. Conforming to micro USB 2.0 specification, connector also supports high-speed data and power transmission. Read More

thermal & heating equipment

Resettable Thermal Cut-Off Devices protect LiP batteries.

September 28, 2012

Measuring 5.8 x 3.75 x 1.15 mm, MHP-TA Series connects bimetal protector in parallel with Polymeric Positive Temperature Coefficient device. In battery cell designs, devices provide resettable overtemperature protection, while utilizing PPTC to act as heater and to keep bimetal latched until fault is removed. Featuring 9 Vdc rating, series comprises low-current MHP-TA6-9 products with approximately 6 A hold current at 25°C, and high-current MHP-TA15-9 products with hold current of 15 A. Read More

electronic components & devices

Low-Resistance SMDs conserve space, power in mobile electronics.

September 25, 2012

With 0.12 x 0.10 in., 0.12 x 0.06 in., or 0.12 x 0.18 in. form factor, low rho SMD series helps provide overcurrent and overtemperature protection for battery pack PCMs (protection circuit modules) used in mobile consumer devices. Products can be assembled with reflowable soldering technique and feature resistance from 10&ndash;25 m&Omega; after reflow process. Designed for operating current of 2 A and above, 9 models help reduce power consumption and improve battery efficiency. Read More

electronic components & devices, mounting & attaching products

SIM Connector suits multi-card and thin mobile devices.

August 8, 2012

Along with 1.4 mm profile, push-push SIM connector features mechanism that facilitates ejection of SIM card. Dual slanted contact design provides stable connection while also helping avoid contact jams from hooking housing components underneath. While card detect switch enables hot swap, card slot is compatible with all SIM cards, and half-moon shape opening strengthens EMI protection. Extra open space at front of housing helps prevent finger cuts when inserting/extracting card. Read More

electrical equipment & systems, electronic components & devices

High-Density Interconnect handles data rates to 40 Gbps.

April 10, 2012

Designed for telecommunications, data center, and networking applications, EMI-protected zQSFP+ connector and cage assembly meets Next-Gen 100 GbE and 100 Gbps 4X InfiniBand EDR requirements by offering 4 lanes of high-speed differential signals with data rates from 25-40 Gbps. Design featuring coupled, narrow-edged, blanked- and formed-contact geometry with insert molding promotes signal integrity, while staggered press-fit pins accommodate belly-to-belly applications. Read More

Other Company News from
TE Connectivity