Company News

Fives Landis Corp.

16778 Halfway Blvd., Hagerstown, MD, 21740, USA

  • 301-797-3400

Latest New Product News from
Fives Landis Corp.

Machinery & Machining Tools, Portable Tools

Landis-Bryant RU2 Grinder features torque tube design.

February 27, 2017

Suitable for processing bores, valve lifters, gears and CVJ components, Landis-Bryant RU2 Grinder features hydrostatic slide ways in each axis. Designed with high resolution servo meters coupled to ball screws for reliable positioning, unit comes with AEMS, automatic taper adjustment and Fanuc i series. Equipped with Landis-Bryant spindles which provide up to 120,000 RPM speeds, product is... Read More

Machinery & Machining Tools, Materials & Material Processing

CNC Twin Turret Grinder combines flexibility and precision.

June 4, 2014

Delivering processing efficacy and flexibility shaft-type parts, Landis Twin Turret™ (LTT) features 2 rotary hydrostatic turrets with integral servo motors and X-axis hydrostatic ways with linear motor in-feed. Multi-spindle grinding machine handles workpieces with swing up to 180 mm and lengths to 400 mm using up to 350 mm dia and 40 mm wide CBN wheels operating at speeds to 120... Read More

Machinery & Machining Tools

CNC Grinder handles various part features in same machine.

September 11, 2006

Landis Evolution CNC Grinder enables precision plunge and traverse peel grinding of multiple part features in same cycle. High-speed spindle permits grinding wheel speeds to 250 m/sec with part rotation to 7,500 rpm. Grinder incorporates granite base, workhead spindle-mounted rotary diamond dresser, and 5 mm wide CBN wheel to contour complex part shapes. Programmable unit offers less than 1 min... Read More

Machinery & Machining Tools, Materials & Material Processing

Double Disc Grinder uses rotary plunge grinding process.

September 11, 2006

Available with choice of Siemens or Fanuc CNC control, Landis Giustina R220 utilizes grinding process that promotes optimal parallelism, flatness, size control, and squareness. It processes parts from 18-40 mm wide and enables part-to-part changeovers in as little as 3 sec. Machine also accommodates wheel changes in 30 min or less. Within its compact footprint, grinder features cast iron bed;... Read More

Machinery & Machining Tools, Materials & Material Processing

CNC Cylindrical Grinder has infinitely variable turret.

September 11, 2006

Infinity(TM) features turret with 2 spindle pod mounting positions. Pods, which can be optimized for use of different size grinding wheels, may be optionally fitted with left- or right-hand wheels adapted to specific applications. Featuring fully hydrostatic bearings and 230° working range, turret offers infinitely variable positioning. Machine accommodates 1,200 mm max work part length, with... Read More

Machinery & Machining Tools

CNC Grinder accommodates shaft lengths up to 1,200 mm.

March 3, 2005

Optimized for use with CBN abrasives, Landis LT1-1200 CNC shaft grinder features cast iron bed; linear motor driven, hydrostatic wheel feed system; motorized, hydrostatic spindle; and linear-guided foot stock with rotary dresser. It uses PC-based open architecture control and accommodates 80-350 mm dia wheels. Manual or automatic loading machine operates at speeds up to 200 m/sec, grinding... Read More

Machinery & Machining Tools

Centerless Grinder suits precision production processes.

September 15, 2004

Able to use conventional or superabrasive wheels, all-electric Viking SuperSeries II incorporates Landis 6400 CNC PC-based, open-architecture control system in addition to digital servo controls and SERCOS interface. Sealing arrangement for anti-friction spindles prevents ingress of contaminants. Machine accommodates parts from 0.05-2.4 in. in diameter and has 20 hp grinding wheel drive. Unit... Read More

Machinery & Machining Tools

Rotating Fixture improves quality of disc grinding.

February 26, 2003

Power-Rotating Fixture allows simultaneous grinding of both sides of parts. It is used with company's vertical double-disc grinders to produce lap-type tolerances in grinding parts with flat and parallel surfaces. Part rotation is fully programmable using servo-controlled fixture, so amount of rotation can be varied during grind. Because it is independent of carrier drive system, fixture can be... Read More

Machinery & Machining Tools

Thrust Wall/Pilot Bore Grinder suits crankshaft manufacturing.

February 20, 2003

Production grinder incorporates kiss grinding of crankshaft thrust wall and internal grinding of pilot bore. Separate external and internal grinding spindles are fitted with cubic boring nitride wheels. Machine centers and supports crankshaft on main journal centerline to hold thrust wall perpendicularity and pilot bore concentricity to main bearings within 0.010 and 0.020 mm, respectively.... Read More

Machinery & Machining Tools

Crankshaft Grinder performs work of 4 separate machines.

August 13, 2002

Crank Center(TM), with cubic boron nitride (CBN) grinding wheel, processes multiple shafts with different width pins or mains without tooling changes. Offerings include open-architecture CNC control, digital servo control, friction-free hydrostatic ways with linear motor drives, and chuck with integrated, extending work centers. Machine-mounted touch probe locates crankshaft radially and... Read More

Machinery & Machining Tools

Grinder excels on parts with perpendicular features.

June 19, 2002

CBN compatible, Viking® angular centerless grinder uses angle-mounted regulating wheel and formed grinding wheel to simultaneously in-feed grind OD and flat surface of parts while maintaining sub-micron tolerances. Plunge-type diamond roll dresser accommodates 20 in. diameter grinding wheel. Construction includes nodular cast iron and epoxy granite base, twin-grip mounted wheels, and... Read More