Company News

Weiler Corp.

One Weiler Dr., Cresco, PA, 18326, USA

  • 800-835-9999

Latest New Product News from
Weiler Corp.

Machinery & Machining Tools, Material Handling & Storage

Tiger® Aluminum Wheels feature a blend of cutting grains.

Sep 08, 2017

Tiger® Cutting, Grinding and Combo Wheels are suitable for aluminum cutting, grinding, stock removal, weld removal, weld blending, beveling and chamfering. Delivering high cut rate, units are designed with non-loading formula and are contaminant-free.

Read More

Machinery & Machining Tools

Tiger BobCat Mini Flap Discs deliver consistent cut rate.

Aug 02, 2017

Suitable for weld blending or edge chamfering, grinding and finishing jobs, Tiger BobCat Mini Flap Discs deliver three times more efficiency than the blending discs and one and half times greater life than original flap discs. Units are available in angled and flat styles in 2 in. and 3 in. diameters and features “R” mount and threaded arbor “S” mounts. Discs are designed for use on... Read More

Machinery & Machining Tools

Tiger® Angled Flap Discs come with self-sharpening zirconium flap disc.

Nov 10, 2016

Available in 7/8-inch arbor or 5/8-inch -11 nut for fast change-over, Tiger Angled Flap Discs features 90° angled flap design which allows operator to grind at higher or lower angle. Featured with phenolic blocking, units reduce the risk of gouging of workpiece while grinding fillet welds for smoother finish. Suitable for grinding steel, stainless steel, aluminum and other hard-to-grind... Read More

Machinery & Machining Tools

Tiger UltraCut Cutting Wheels comes with self-sharpening zirconia alumina grain.

Nov 09, 2016

Available in both zirconia alumina grain and INOX, Tiger UltraCut 1 mm Cutting Wheels come in diameters of 4 1/2 and 5 in. UltraCut 1 mm delivers clean, precise cuts with smaller seams on thin sheet metal, tubes and small diameter rods. Weiler SOLID CORE technology helps in increasing wheel life and stability, maximize cuts per wheel, reduce changeover time, and minimize costs. INOX wheels are... Read More

Machinery & Machining Tools

Flap Discs grind and blend carbon and stainless steel.

Sep 01, 2016

Featuring self-sharpening Zirconia Alumina grain, Wolverine® Abrasive Flap Discs deliver aggressive grinding from start to finish. Discs come in both Type 27 and Type 29 styles, allowing for optimal angle of approach and finish. For fast changeover, flap discs are available with quick-change 5/8 in. – 11 nut, in addition to 5/8 and 7/8 in. arbors and variety of diameters to fit all tool... Read More

Machinery & Machining Tools

Abrasive Flap Discs deliver aggressive performance.

Jul 22, 2013

Suited for tough EDGE grinding applications, Tiger Paw™ 100% zirconium flap discs feature multiple layers of coated abrasive material that expose sharp, fresh grains as they wear away. Poly cotton backing prevents premature grain shedding on aggressive applications, further increasing productivity. Phenolic back Tiger Paw is available in 4 ½, 5, and 7 in. sizes with or without 5/8 in.-11... Read More

Cleaning Products & Equipment, Machinery & Machining Tools, Portable Tools

Abrasive Brushes support high feed rates, short dwell times.

Apr 01, 2013

Burr-Rx™ products include power tube brushes, small-diameter wheels, Bore-Rx™ internal deburring tools, mini-disc brushes, and banded end brushes in addition to large-diameter wheel brushes and shell-mill-holder disc brushes. Black nylon filaments are co-extruded with engineered ceramic abrasive grain, and brushes are suited for deburring inconel, stainless steel, and titanium. Assortment... Read More

Machinery & Machining Tools

Abrasive Flap Discs meet needs of aggressive applications.

Dec 07, 2012

Designed for aggressive performance on tough EDGE grinding applications, Tiger Paw™ flap discs feature grain and poly-cotton backing that promote operational efficiency and service life. Multiple layers of coated abrasive material expose sharp, fresh grains as they wear, and 100% premium zirconium grain prevents premature grain shedding on aggressive applications. Phenolic back Tiger Paw is... Read More

Machinery & Machining Tools

Ceramic Abrasives use split coat technology for grain retention.

Nov 21, 2012

Designed for aluminum, stainless steel, Inconel, titanium, and other hand-to-grind metals, SABER TOOTH Bright Red top coated abrasive products include standard angled style flap discs, as well as ceramic grain high-density flap discs, blending discs, resin fiber discs, and belts. Flap discs come in 4 ½ and 7 in. sizes, while blending discs come in 2 and 3 in. diameters with grit sizes of... Read More

Cleaning Products & Equipment, Machinery & Machining Tools

Deburring Brushes feature ceramic grain abrasive filament.

May 23, 2011

Designed to address almost any automated deburring need, Burr-Rx(TM) Brushes feature black nylon filaments that are co-extruded with engineered ceramic abrasive grain. Extreme aggression of brushes minimizes cycle times by allowing use of high feed rates and short dwell times. Burr-Rx(TM) Brushes are suited for deburring tough materials such as Inconel, stainless steel, and titanium. Read More

Cleaning Products & Equipment, Machinery & Machining Tools, Portable Tools

Weld Cleaning Brushes facilitate pipeline construction work.

Jan 28, 2011

DUALLY(TM) stringer-bead wheels facilitate practice of periodically switching mounting position in order to maintain speed and effectiveness of weld cleaning brushes during pipeline construction. To eliminate interference issues, design features nut with hex on each side of wheel tall enough to ensure adequate clearance on tool. Stringer-bead twist puts sharp wire tips at end of knot, allowing... Read More

Machinery & Machining Tools

Ceramic Filament Brushes target nuclear power industry.

Apr 26, 2010

Suited for nuclear power industry where Foreign Material Exclusion programs may limit or exclude use of wire brushes in some areas during routine maintenance or repairs, Nylox® Ceramic Filament Brushes can be used for many deburring, cleaning, and surface preparation applications. Ceramic grain enables use on materials such as Inconel, stainless steel, and titanium. Models are available for... Read More

Cleaning Products & Equipment, Machinery & Machining Tools, Portable Tools

End Brushes feature nickel-plated cup.

Jun 22, 2009

Stem mounted end brush with nickel-plating has high melting point and conforms to military specifications for nuclear applications. It is suited for weld preparation and cleaning, cleaning and finishing recessed areas or ID's, and die, mold and tool cleaning and polishing. Crimped wire (solid end) brushes are available in ½, ¾, and 1 in. dia with trim lengths ranging from 7/8 to 1 1/8 in.,... Read More

Machinery & Machining Tools

Bonded Abrasive Wheels suit cutting/grinding applications.

May 01, 2009

Working with steel, iron, and other ferrous metals, Vortec Pro(TM) wheels are reinforced with fiberglass webbing for stability and resin-bond-formulated for aggressive stock removal and accelerated cutting. Type 27 grinding and cutting products, offered in 4-7 in. dia, have aluminum oxide grain and are designed for use on right-angle grinders. Available from 2-7 in. dia, Type 1 cutting wheels... Read More

Machinery & Machining Tools

Ceramic Flap Disc cuts stainless steel, inconel, and titanium.

Dec 09, 2008

SABER TOOTH ceramic flap disc features self-sharpening ceramic grain and incorporates grinding aid that prevents dulling and glazing, allowing for cool cutting, which protects parts from heat discoloration. Able to grind and finish in single step, angled-style, phenolic-backed disc is available in 4½-7 in. sizes. Non-marking trimmable backing allows operator to cut diameter, maximizing disc... Read More

Machinery & Machining Tools, Material Handling & Storage

Flap Wheels provide aggressive cutting action.

Apr 18, 2008

Featuring solid hub construction, Tiger® and Vortec(TM) Flap Wheels provide chatter-free finishing. Units are suited for variety of applications, from cleaning, edge blending, deburring, and mismatch removal on machined parts, to smoothing metal, plastic, and wood, and final finishes prior to painting and plating. Wheels also provide optimal results when used for blending and finishing on... Read More

Machinery & Machining Tools

Deburring Brushes utilize advanced filament technology.

Apr 17, 2008

Burr-Rx(TM) disc brushes are made of black nylon filaments co-extruded with high aggression ceramic grains. Constructed with steel shell, they provide dimensional stability, and are produced with 2 in. bore that allows for direct mounting on equipment without need for adapters. Burr-Rx brushes are suited for deburring materials such as inconel, stainless steel, and titanium and are also available... Read More

Cleaning Products & Equipment, Machinery & Machining Tools, Portable Tools

Custom Wire Brushes suit tube end deburring applications.

Jun 14, 2007

Engineered to unique requirements, Crimped Wire Wide Face Brushes are dynamically balanced and available in 4 fill densities. Types include hard drawn steel, high-tensile steel, and Type 302 stainless steel wire, with wire diameters from .006-.020 in. Sectional construction enables choice of face width up to 30 in., available in ½ in. increments. Applications include surface finishing of clad... Read More

Cleaning Products & Equipment, Machinery & Machining Tools, Portable Tools

Brushes provide in-machine deburring.

Mar 07, 2007

Ranging in size from ¾-4 in. with wire or abrasive nylon filament, Bore-Rx(TM) Brushes remove all burrs found at intersecting holes and other internal edges of workpiece, and can also be used for bore finishing applications. Unlike tube brushes, Bore-Rx brushes rotate in both directions and can operate at high speeds. They can be adapted for use in end mill holders or can be mounted using 3/8... Read More

Machinery & Machining Tools

Abrasive Brushes suit demanding deburring applications.

Nov 16, 2006

Exhibiting shock resistance and dimensional stability, Nylox® Composite Metal Hub Wheel Brushes (NMX) are constructed with steel shell and designed for optimal density. Polymer technology retains brush filaments, eliminating need for internal metal components, and NMX technology allows for multi-section stacking. Crimped or rectangular filament wheels, both made with silicon carbide, have 2... Read More

Other Company News from
Weiler Corp.