DL Technology, LLC
Haverhill, MA 01832
Syringe Heater ensures consistent material viscosity.
Intended for programmable temperature control and preheating of dispense materials, DL Syringe Heater is available in 10 and 30 cc sizes, and operates at 24 V up to 65 W. Unit is precision engineered from aluminum to conduct heat directly to syringe, while non-conductive mounting prevents transfer of heat to valve or motor. When combined with DL HY-FLO(TM) Valve, Syringe Heater provides complete...
Read More »
Dispensing System offers secure, programmable operation.
DispenseLink IIÃ-® system is compatible with Micro Valve(TM) for micro-volume dispensing or HY-FLO(TM) valve for large-volume dispensing applications. PLC controls provide single-dispense programming for RPM, index, and acceleration, while programmable encoder controls rotation of auger and provides 57,000 counts per 360Ã-
Read More »
Dispensing Enhancement Kit integrates with existing valves.
Micro Dispensing Enhancement Kit offers solution to worn or outmoded dispensing valves without off-site repairs or entire valve replacement. It includes DL Cartridge, DL Pump Body with adapter for existing motor, DL Pump Mount, and DL stainless steel needles. Compliant Z-axis is provided for use with footed dispense needles.
Read More »
Dispensing Valve features encoder count.
Micro Valve(TM) uses programmable encoder, which controls rotation of auger, providing 200,000 counts per 360Ã-
Read More »
Dispensing Valve offers precise thermal controls.
With flow rate as high as 250 mg/sec, HY-FLO(TM) maintains consistent temperature and material viscosity in large-volume dispensing applications. Embedded thermocouple offers closed-loop control, while plastic prevents heat migration to gantry and motor. Auger rotation, controlled by brushless motor with programmable encoder, provides 8,000+ counts per 360Ã-
Read More »
Stainless Steel Needles dispense epoxies and solder paste.
EZ-FLO(TM) Luer-LokÃ-® style dispensing needles are precision machined from single piece of stainless steel with ID tolerance of Ã-
Read More »
Dispense Valve Cartridge suits micro volume applications.
No-Drip vacuum-sealed cartridge dispenses flux, underfill, and encapsulation. Product utilizes post-dispense vacuum to reverse internal auger, drawing excess material back into cartridge. Amount and duration of vacuum is programmable. Unit dispenses low-viscosity materials that tend to drip between dispense locations. Precision machined DL Cartridges are available in 3 styles: floating/fixed,...
Read More »Dispensing System upgrades any platform to micro volumes.
DispenseLink(TM) provides micro volume capability for any dispensing platform in high density interconnect, semiconductor packaging, and SMT applications. It includes controller, DL Micro Valve, and DL custom machined dispensing needles. System can provide dot arrays, lines, fill routines, and custom patterns at material volumes of 10 mils or less. Needles are machined from solid stainless steel...
Read More »Controller provides micro volume dispensing capability.
DispenseLink is designed for micro volume dispensing for high-density interconnect, semiconductor packaging and SMT applications. Providing programmable increment and velocity control for DL Micro Valve, controller has capability for dot arrays, lines, fill routines, and custom patterns at material volumes of less than 10 mL. Brushless motor controls auger rotation with programmable encoder,...
Read More »
Syringe Heater ensures consistent material viscosity.
Intended for programmable temperature control and preheating of dispense materials, DL Syringe Heater is available in 10 and 30 cc sizes, and operates at 24 V up to 65 W. Unit is precision engineered from aluminum to conduct heat directly to syringe, while non-conductive mounting prevents transfer of heat to valve or motor. When combined with DL HY-FLO(TM) Valve, Syringe Heater provides complete...
Read More »
Dispensing System offers secure, programmable operation.
DispenseLink IIÃ-® system is compatible with Micro Valve(TM) for micro-volume dispensing or HY-FLO(TM) valve for large-volume dispensing applications. PLC controls provide single-dispense programming for RPM, index, and acceleration, while programmable encoder controls rotation of auger and provides 57,000 counts per 360Ã-
Read More »
Dispensing Enhancement Kit integrates with existing valves.
Micro Dispensing Enhancement Kit offers solution to worn or outmoded dispensing valves without off-site repairs or entire valve replacement. It includes DL Cartridge, DL Pump Body with adapter for existing motor, DL Pump Mount, and DL stainless steel needles. Compliant Z-axis is provided for use with footed dispense needles.
Read More »
Dispensing Valve features encoder count.
Micro Valve(TM) uses programmable encoder, which controls rotation of auger, providing 200,000 counts per 360Ã-
Read More »
Dispensing Valve offers precise thermal controls.
With flow rate as high as 250 mg/sec, HY-FLO(TM) maintains consistent temperature and material viscosity in large-volume dispensing applications. Embedded thermocouple offers closed-loop control, while plastic prevents heat migration to gantry and motor. Auger rotation, controlled by brushless motor with programmable encoder, provides 8,000+ counts per 360Ã-
Read More »
Stainless Steel Needles dispense epoxies and solder paste.
EZ-FLO(TM) Luer-LokÃ-® style dispensing needles are precision machined from single piece of stainless steel with ID tolerance of Ã-
Read More »
Dispense Valve Cartridge suits micro volume applications.
No-Drip vacuum-sealed cartridge dispenses flux, underfill, and encapsulation. Product utilizes post-dispense vacuum to reverse internal auger, drawing excess material back into cartridge. Amount and duration of vacuum is programmable. Unit dispenses low-viscosity materials that tend to drip between dispense locations. Precision machined DL Cartridges are available in 3 styles: floating/fixed,...
Read More »Dispensing System upgrades any platform to micro volumes.
DispenseLink(TM) provides micro volume capability for any dispensing platform in high density interconnect, semiconductor packaging, and SMT applications. It includes controller, DL Micro Valve, and DL custom machined dispensing needles. System can provide dot arrays, lines, fill routines, and custom patterns at material volumes of 10 mils or less. Needles are machined from solid stainless steel...
Read More »Controller provides micro volume dispensing capability.
DispenseLink is designed for micro volume dispensing for high-density interconnect, semiconductor packaging and SMT applications. Providing programmable increment and velocity control for DL Micro Valve, controller has capability for dot arrays, lines, fill routines, and custom patterns at material volumes of less than 10 mL. Brushless motor controls auger rotation with programmable encoder,...
Read More »