ITT Goulds Pumps, Inc.
Seneca Falls, NY 13148
Share:
Slurry Pumps are designed for severe, abrasive service.
Model SRL elastomer-lined slurry pumps handle up to 20,000 gpm and attain heads to 164 ft at temperatures up to 250Ã-
Read More »
Pump Controller offers sensorless flow measurement.
Designed for PumpSmart PS200, PumpSmart v5.0 can calculate flow of centrifugal pumps within Ã-
Read More »
Industrial Sump Pumps suit solids-handling applications.
Model 3171 self-priming, vertical wet pit sump and process pump offers sealless construction and is available with recessed impeller. Horizontal, solids-handling unit offers capacities to 3,180 gpm and heads to 344 ft. Trash HogÃ-® solids handling, self-priming pump features non-clog impeller, capacities to 6,000 gpm, and heads to 140 ft. Offered in capacities to 4,000 gpm and heads to 220...
Read More »
Pump handles corrosive and abrasive slurries.
Medium-duty Model JC features extra thick wet end components, heavy-duty power end, and replaceable wear liner. Impeller design allows for external impeller clearance adjustment. Available in 15 sizes, Model JC offers capacities to 7,000 gpm, heads to 240 ft, temperatures to 250Ã-
Read More »
Centrifugal Pumps eliminate clogging problems.
Suited for sludge and slurries containing large solids, entrained air, and fibrous/stringy material, WhirlfloÃ-® vortex pumps feature fully recessed impellers that produce clear flow path to pump discharge. Spherical solids up to 10 in. can pass through pumps. Available in cast iron, high chromium iron, and stainless steel, Whirlflo units range from 2-10 in. with capacities to 7,000 gpm and...
Read More »
Custom Pumps meet large capacity requirements.
Vertical column and axial flow pumps are suited for sewage, water supply, wastewater, storm water, and flood control applications where pumping requirements can exceed 500,000 gpm. Vertical wet pit column pumps have optional pull out design and are available in sizes up to 120 in. dia with 600 ft heads. Horizontal axial flow pump design has axially split casing and is offered in sizes to 132 in....
Read More »
Wastewater Pumps handle difficult solids.
Utilizing ShearpellerÃ-® impeller, Series NS Pumps handle large, stringy, or fibrous solids in suspension, up to 26% entrained air in water by volume, and highly viscous slurries. Shearpeller radial vanes are narrow near center to allow large or stringy solids to enter, and widen toward outer diameter of impeller to provide positive pumping action. Almost anything up to 5 in. in diameter that...
Read More »Process Pumps offer cool-running mechanical seal.
Model 3196 features TaperBore(TM) Plus seal chamber, which keeps solids, air, and vapors away from seal faces. Radial clearance between mechanical seal and chamber facilitates liquid circulation for heat removal, while Vane Particle Ejector directs solids away from seal faces.
Read More »
Repair Service maintains rotating equipment.
Integrated service solutions include repair and maintenance of all brands of pumps and rotating equipment such as turbines, heat exchangers, gearboxes, compressor cylinders, blowers, piston and rod repair, as well as babbitted bearings. Engineers and technicians, available to respond to needs 24/7, 365 days a year, provide field service and are skilled in areas of mechanical and hydraulic design,...
Read More »
Close-Coupled Pump fits limited-space applications.
Model 3196 CC has open-impeller design, allowing it to pass larger solids. Labyrinth seals, in front of motor lip seal, help eliminate motor failure due to fluid ingress. Back-pullout design allows all operating parts to be removed without disturbing suction or discharge piping. Pump may be cart-mounted for applications where portability is desired.
Read More »Slurry Pumps are designed for severe, abrasive service.
Model SRL elastomer-lined slurry pumps handle up to 20,000 gpm and attain heads to 164 ft at temperatures up to 250Ã-
Read More »
Pump Controller offers sensorless flow measurement.
Designed for PumpSmart PS200, PumpSmart v5.0 can calculate flow of centrifugal pumps within Ã-
Read More »
Industrial Sump Pumps suit solids-handling applications.
Model 3171 self-priming, vertical wet pit sump and process pump offers sealless construction and is available with recessed impeller. Horizontal, solids-handling unit offers capacities to 3,180 gpm and heads to 344 ft. Trash HogÃ-® solids handling, self-priming pump features non-clog impeller, capacities to 6,000 gpm, and heads to 140 ft. Offered in capacities to 4,000 gpm and heads to 220...
Read More »
Pump handles corrosive and abrasive slurries.
Medium-duty Model JC features extra thick wet end components, heavy-duty power end, and replaceable wear liner. Impeller design allows for external impeller clearance adjustment. Available in 15 sizes, Model JC offers capacities to 7,000 gpm, heads to 240 ft, temperatures to 250Ã-
Read More »
Centrifugal Pumps eliminate clogging problems.
Suited for sludge and slurries containing large solids, entrained air, and fibrous/stringy material, WhirlfloÃ-® vortex pumps feature fully recessed impellers that produce clear flow path to pump discharge. Spherical solids up to 10 in. can pass through pumps. Available in cast iron, high chromium iron, and stainless steel, Whirlflo units range from 2-10 in. with capacities to 7,000 gpm and...
Read More »
Custom Pumps meet large capacity requirements.
Vertical column and axial flow pumps are suited for sewage, water supply, wastewater, storm water, and flood control applications where pumping requirements can exceed 500,000 gpm. Vertical wet pit column pumps have optional pull out design and are available in sizes up to 120 in. dia with 600 ft heads. Horizontal axial flow pump design has axially split casing and is offered in sizes to 132 in....
Read More »
Wastewater Pumps handle difficult solids.
Utilizing ShearpellerÃ-® impeller, Series NS Pumps handle large, stringy, or fibrous solids in suspension, up to 26% entrained air in water by volume, and highly viscous slurries. Shearpeller radial vanes are narrow near center to allow large or stringy solids to enter, and widen toward outer diameter of impeller to provide positive pumping action. Almost anything up to 5 in. in diameter that...
Read More »Process Pumps offer cool-running mechanical seal.
Model 3196 features TaperBore(TM) Plus seal chamber, which keeps solids, air, and vapors away from seal faces. Radial clearance between mechanical seal and chamber facilitates liquid circulation for heat removal, while Vane Particle Ejector directs solids away from seal faces.
Read More »
Repair Service maintains rotating equipment.
Integrated service solutions include repair and maintenance of all brands of pumps and rotating equipment such as turbines, heat exchangers, gearboxes, compressor cylinders, blowers, piston and rod repair, as well as babbitted bearings. Engineers and technicians, available to respond to needs 24/7, 365 days a year, provide field service and are skilled in areas of mechanical and hydraulic design,...
Read More »
Close-Coupled Pump fits limited-space applications.
Model 3196 CC has open-impeller design, allowing it to pass larger solids. Labyrinth seals, in front of motor lip seal, help eliminate motor failure due to fluid ingress. Back-pullout design allows all operating parts to be removed without disturbing suction or discharge piping. Pump may be cart-mounted for applications where portability is desired.
Read More »