Canfield Connector
Youngstown, OH 44514
Share:
Thin Indicator Light retrofits to existing applications.
Installed between DIN type coil and its mating connector, Interposed Lighted Wafer (iLW) has SMT design and Gallium Arsenide LED which allow it to retrofit existing applications or be used in conjunction with unlighted connectors. It is MINI standard but also available for Sub-Micro 8 or 9.4 mm, DIN 43650 Form A /ISO 4400, and EN 175301-803:2000 retrofits. Rated to NEMA 4, product is not polarity...
Read More »
Canfield Connector's 5FR and 5JR Connectors Now CSA Approved
Boardman, Ohio - (February 2009) - Canfield Connector's 5FR and 5JR series of solenoid valve connectors have been awarded CSA approval for the United States and Canada. Both series incorporate full-wave bridge rectifiers inside fully molded connectors, converting alternating current to direct current. Coil burnout due to valve sticking is reduced and the hum of alternating current is eliminated....
Read More »
Micro Solenoid Driver Connector saves energy and coils.
Available in fixed or adjustable versions, Series D5400 Micro Solenoid Driver (MSD) connector promotes performance while minimizing heat buildup in solenoid valve operators. Solution induces accelerated solenoid pull-in with high input voltage and automatically reduces voltage during hold-in. This increases efficiency while extending solenoid life and conserving energy. Solution also enables...
Read More »
Magnetic Proximity Switch fits onto linear actuators.
Designed to fit D-shaped groove detail in linear actuators, 9M50 magnetic proximity switch is inserted anywhere along actuator, rotated, then locked into place. Design meets IP67 and NEMA 6 environmental specifications, and is corrosion- and washdown-resistant. Fully encapsulated device is available in reed, with 5-120 Vac/dc range, and electronic styles in either NPN or PNP. Standard wire...
Read More »
Solenoid Valve Connectors have integrated gasket design.
Able to turn alternating current into direct current, 5FR and 5JR series incorporate full-wave bridge rectifiers inside fully molded connectors. Both reduce coil burnout due to valve sticking and eliminate hum of alternating current. Rated to IP67/NEMA 6, products are made from flexible polyurethane and come in low-profile, straight-line (5FR) or 90Ã-
Read More »
Wire Connectors provide integrated strain relief.
CanTop(TM) series wire bulkhead feed-through connectors feature sealing mechanism that ensures tight fit. Designed to meet NEMA 4/IP65 specifications, corrosion-resistant products are made from engineered materials resistant to moisture and dust. Series comes in NPT 3/8, -½, and -¾ thread sizes and is compatible with wire diameters from .157-.984 in. for strain relief and .157-.709 in. for...
Read More »Magnetic Proximity Sensor is designed for tie rod cylinders.
Designed to sense actuator position in strict, hazardous locations, Model 7HL features floating clamp design, which ensures proper assembly and sensor position on 2-8 in. bore, NFPA tie rod linear actuators. Unit is constructed with aircraft aluminum body, epoxy encapsulated shock-resistant PCB, and Ã-½ in. conduit female thread with hard-usage multi-conductor cable. Sensor can switch current...
Read More »Magnetic Proximity Sensors fit in tight spaces.
Available in both solid state electronic and reed styles, Series 9D and 9E require no special mounting using standard .250 in. dovetail slot. Both have standard on-board indicator lights viewable from wide angles and are compatible with intrinsically safe barriers. Molded construction meets NEMA6/IP67 specifications and is corrosion and wash-down resistant. Sensors include 9 ft cable or optional...
Read More »
Thin Indicator Light retrofits to existing applications.
Installed between DIN type coil and its mating connector, Interposed Lighted Wafer (iLW) has SMT design and Gallium Arsenide LED which allow it to retrofit existing applications or be used in conjunction with unlighted connectors. It is MINI standard but also available for Sub-Micro 8 or 9.4 mm, DIN 43650 Form A /ISO 4400, and EN 175301-803:2000 retrofits. Rated to NEMA 4, product is not polarity...
Read More »
Canfield Connector's 5FR and 5JR Connectors Now CSA Approved
Boardman, Ohio - (February 2009) - Canfield Connector's 5FR and 5JR series of solenoid valve connectors have been awarded CSA approval for the United States and Canada. Both series incorporate full-wave bridge rectifiers inside fully molded connectors, converting alternating current to direct current. Coil burnout due to valve sticking is reduced and the hum of alternating current is eliminated....
Read More »
Micro Solenoid Driver Connector saves energy and coils.
Available in fixed or adjustable versions, Series D5400 Micro Solenoid Driver (MSD) connector promotes performance while minimizing heat buildup in solenoid valve operators. Solution induces accelerated solenoid pull-in with high input voltage and automatically reduces voltage during hold-in. This increases efficiency while extending solenoid life and conserving energy. Solution also enables...
Read More »
Magnetic Proximity Switch fits onto linear actuators.
Designed to fit D-shaped groove detail in linear actuators, 9M50 magnetic proximity switch is inserted anywhere along actuator, rotated, then locked into place. Design meets IP67 and NEMA 6 environmental specifications, and is corrosion- and washdown-resistant. Fully encapsulated device is available in reed, with 5-120 Vac/dc range, and electronic styles in either NPN or PNP. Standard wire...
Read More »
Solenoid Valve Connectors have integrated gasket design.
Able to turn alternating current into direct current, 5FR and 5JR series incorporate full-wave bridge rectifiers inside fully molded connectors. Both reduce coil burnout due to valve sticking and eliminate hum of alternating current. Rated to IP67/NEMA 6, products are made from flexible polyurethane and come in low-profile, straight-line (5FR) or 90Ã-
Read More »
Wire Connectors provide integrated strain relief.
CanTop(TM) series wire bulkhead feed-through connectors feature sealing mechanism that ensures tight fit. Designed to meet NEMA 4/IP65 specifications, corrosion-resistant products are made from engineered materials resistant to moisture and dust. Series comes in NPT 3/8, -½, and -¾ thread sizes and is compatible with wire diameters from .157-.984 in. for strain relief and .157-.709 in. for...
Read More »Magnetic Proximity Sensor is designed for tie rod cylinders.
Designed to sense actuator position in strict, hazardous locations, Model 7HL features floating clamp design, which ensures proper assembly and sensor position on 2-8 in. bore, NFPA tie rod linear actuators. Unit is constructed with aircraft aluminum body, epoxy encapsulated shock-resistant PCB, and Ã-½ in. conduit female thread with hard-usage multi-conductor cable. Sensor can switch current...
Read More »Magnetic Proximity Sensors fit in tight spaces.
Available in both solid state electronic and reed styles, Series 9D and 9E require no special mounting using standard .250 in. dovetail slot. Both have standard on-board indicator lights viewable from wide angles and are compatible with intrinsically safe barriers. Molded construction meets NEMA6/IP67 specifications and is corrosion and wash-down resistant. Sensors include 9 ft cable or optional...
Read More »