Hyson Products
Brecksville, OH 44141
Gas Springs feature subcompact design.
With 32 mm diameter, Model T2SC-740 offers stroke lengths from 6-50 mm, while Model T2SC-2900 has 45 mm diameter, stroke lengths from 10-50 mm, and side port plate for mounting. Both are FDA approved. Four models from 4700 through 18300 feature smaller inner lock rings, and Models 4700 and 7500 also include smaller outer lock ring grooves for flange mounting.
Read More »Compression Tank works in nitrogen gas spring systems.
Featuring modular design, High Pressure Compression Tank is engineered for use at 2,175 psi. It includes rupture disc plug for added safety and multiple ports on each end for flexibility. Three models in series provide standard volumes from 100-460 cu-in.
Read More »
Roller Cams offer minimum service life of 1 million cycles.
Dyne-A-CamÃ-® Models RC2-30, RC2-50, and RCP2-150 provide piercing forces of 30, 50, and 150 kN, respectively. Each can be mounted at any angle, with 50Ã-
Read More »
Die Stamper is available with sensor kits.
Models HCCU-60 and HCCU-150 in Dyne-A-CamÃ-® Nitro-Cam(TM) Series are available with respective sizes of 6Ã-¾ and 16Ã-¾ tons. Products, offered with sensor kits for positioning, can be mounted at any angle in die and retrofit to existing dies. Features include constant force through stroke, built-in mechanical stop for exact cam stroke, and no fluid pressure at die open. Other sizes...
Read More »
Gas Spring features all metric interfaces.
Model T2SLM Stock Lifter gas spring withstands 2 mil cycles between rebuilds. Lock ring style cartridge provides easy rebuild. Guidance and lift in one compact design eliminates need for additional guide bushings or anti-rotation feature. Double tube design isolates spring from side load. Lifter adjusts with force range from 100-700 lb and resists die fluid ingestion. Controlled return speed...
Read More »
Nitrogen Gas Springs use 2-way valve to adjust force.
Model T3-1500 is 2Ã-½ in. in diameter with contact force of 3,375 lb, while Model T3-9500 has 6 in. diameter and contact force of 21,400 lb. All T3 springs operate in both self-contained and hosed system mode. Units include safety guide, tapped holes for mounting, ISO square mounting groove for standard flange options, and hardened, corrosion-resistant rod finish. Oil retaining pipe is...
Read More »
Gas Springs suit transfer and progressive die applications.
Designed for part-lifting applications, T2SL Stock Lifters replace air cylinders that require shop air and provide 2 million cycles between rebuilds. Products incorporate guidance and lift in one compact, double-tube design that isolates gas spring from side load. With adjustable force range of 100-700 lb, units resist die fluid ingestion and offer controlled return speed option for reduced pad...
Read More »
Test Stand measures initial force of nitrogen gas springs.
Digital Test Stand verifies pressure during repair and maintenance, and measures force after production runs to document force loss or gain. Lightweight unit can mount directly to table. Maximum rated capacity is 5,000 lb with -±5% full-scale accuracy. Digital readout provides both lb and kg of force. Holding fixtures are provided for smaller gas springs.
Read More »
Monitor measures nitrogen gas pressure in gas spring systems.
APM-3000 Automatic Pressure Monitor includes 15 ft of hose and female quick disconnect that attaches to universal quick disconnect on manifold or hosed system's control panel. If pressure drops below preset lower limit, red warning light alerts press operator and can be wired to shut down press. Lower limit can be adjusted to any pressure within 200-3000 psi. APM-3000 requires 125 Vac electrical...
Read More »
Hose System ties die springs together.
Micro EZ(TM) is suitable for hosing together gas springs in smaller and progressive dies where space is limited and where standard hose and fittings cannot be used. It provides pressure adjustability, pressure monitoring, and uniform pressure. Compared to standard hose systems, it has reduced minimum bend radius, more compact hose adapters, and control panel that allows hoses to be connected...
Read More »Hyson Offers Spanish-Language Product Brochures
Brecksville, OH-Hyson Products, a business of Barnes Group Inc., has issued three of its gas spring brochures, including the TankerÃ-® S&T Series, the T3 Series, and the T4 Series, in Spanish. The Tanker S&T Series of high performance gas springs offers high force in short heights and features patented dynamic lubrication to extend spring life. The T3 Series has 12 models to choose from with...
Read More »New SRS Smooth Return Series Gas Springs Brochure Available
March 1, 2008 Brecksville, OH-Hyson Products, a business of Barnes Group Inc., issues literature on the controllable SRS Series, innovative gas springs engineered to reduce pad bounce associated with increased return stroke speeds from the press, and to increase part transfer efficiency. The 32-page brochure details features: built-in return stroke speed dampening to eliminate pad bounce, stroke...
Read More »Brochure Describes Di-Dro Advanced Forming Systems
Brecksville, OH-Hyson Products issues literature on the Di-Dro Advanced Forming System, the latest in its expanding line of controllable products that includes the CS2 nitrogen gas springs, and DRACÃ-® and DRACÃ-®2 delayed return manifolds. The Di-Dro is a hydraulic manifold that combines high force in a small space, especially important in automotive and other applications that use...
Read More »New Brochure Available on High Performance Tanker-®T and Tanker-®S Gas Springs
Brecksville, OH-Hyson Products, a business of Barnes Group Inc., issues literature on the TankerÃ-®S and TankerÃ-®T (TNKS and TNKT), the latest generation of the TankerÃ-® gas spring series originally introduced in 1985. The new springs offer high force in a short height with contact forces from 2,200 to 15,400 lbs. and full stroke forces from 3,900 to 27,600 lbs. The 24-page color...
Read More »Kelm Appointed Business Unit Manager for Hyson Products
Brecksville, OH - Johan Runesson, Vice President and General Manager of Nitrogen Products, announces the appointment of Hank Kelm to the position of Business Unit Manager, Hyson Products. In the position of Business Unit Manager, Mr. Kelm is responsible for leading the continuous improvement efforts to maintain manufacturing excellence at the Brecksville facility as well as increasing the...
Read More »
Gas Springs feature subcompact design.
With 32 mm diameter, Model T2SC-740 offers stroke lengths from 6-50 mm, while Model T2SC-2900 has 45 mm diameter, stroke lengths from 10-50 mm, and side port plate for mounting. Both are FDA approved. Four models from 4700 through 18300 feature smaller inner lock rings, and Models 4700 and 7500 also include smaller outer lock ring grooves for flange mounting.
Read More »Compression Tank works in nitrogen gas spring systems.
Featuring modular design, High Pressure Compression Tank is engineered for use at 2,175 psi. It includes rupture disc plug for added safety and multiple ports on each end for flexibility. Three models in series provide standard volumes from 100-460 cu-in.
Read More »
Roller Cams offer minimum service life of 1 million cycles.
Dyne-A-CamÃ-® Models RC2-30, RC2-50, and RCP2-150 provide piercing forces of 30, 50, and 150 kN, respectively. Each can be mounted at any angle, with 50Ã-
Read More »
Die Stamper is available with sensor kits.
Models HCCU-60 and HCCU-150 in Dyne-A-CamÃ-® Nitro-Cam(TM) Series are available with respective sizes of 6Ã-¾ and 16Ã-¾ tons. Products, offered with sensor kits for positioning, can be mounted at any angle in die and retrofit to existing dies. Features include constant force through stroke, built-in mechanical stop for exact cam stroke, and no fluid pressure at die open. Other sizes...
Read More »
Gas Spring features all metric interfaces.
Model T2SLM Stock Lifter gas spring withstands 2 mil cycles between rebuilds. Lock ring style cartridge provides easy rebuild. Guidance and lift in one compact design eliminates need for additional guide bushings or anti-rotation feature. Double tube design isolates spring from side load. Lifter adjusts with force range from 100-700 lb and resists die fluid ingestion. Controlled return speed...
Read More »