Company News

Exair Corporation

11510 Goldcoast Dr., Cincinnati, OH, 45249, US

  • 513-671-3322
  • 800-903-9247

General Information:
Bryan Peters
USA
Phone: 513-671-3322
Fax: 513-671-3363

Share Like Tweet Add Email

Latest New Product News from
Exair Corp.

Fluid & Gas Flow Equipment

Air Nozzle Swivel Fittings facilitate precision blow off.

November 6, 2014

Available in 3 sizes, Type 316 Stainless Steel Mini Swivel Fittings facilitate position adjustment of any 316SS or PEEK thermoplastic mini Super Air Nozzles. These 1/8 MNPT Mini Swivel Fittings provide smallest nozzles 50° total angle of adjustment for maximum effectiveness and also works with M4x0.5 Atto Super Air Nozzle, M5x0.5 Pico Super Air Nozzle, and M6x0.75 Nano Super Air Nozzle. Use lends to precise, focused blowoff for applications in tight spaces or requiring minimal compressed air. Read More

Fluid & Gas Flow Equipment

Drip-Free Atomizing Nozzles positively stop liquid flow.

October 10, 2014

In addition to mixing liquid and air internally and producing fine atomization of liquids up to 300 centipoise, No Drip Internal Mix Atomizing Spray Nozzles positively stop liquid flow when compressed air is shut off. This prevents unwanted drips that can ruin product function on sealing/mating surfaces and appearance of painted/coated finishes. Available patterns include narrow angle round, wide angle round, flat fan, deflected flat fan, and 360° hollow circular. Read More

Fluid & Gas Flow Equipment

Stainless Steel Flat Air Nozzle produces high force, low noise.

September 12, 2014

Consuming 17.5 scfm of air at 80 psig, 1 in. High Power Stainless Steel Flat Super Air Nozzle™ produces flat, 1 in. wide airstream with blowing force of 16 oz when mounted 12 in. from target. Integrated technology maximizes entrained airflow while reducing noise (82 dBA), and Type 316 stainless steel construction withstands corrosive, high-temperature, food, pharmaceutical, and chemical environments. Force and flow may be adjusted by installing different shim thicknesses. Read More

Fluid & Gas Flow Equipment

PEEK Air Nozzle ensures precise, non-marring blowoff.

August 7, 2014

Designed to replace existing nozzles or open pipes, Model 1109-PEEK Pico Super Air Nozzle produces narrowly focused air pattern. Amplification of airflow and blowing force of 5.0 oz are achieved with air consumption of 4.9 scfm at 80 psig. While overall length of 0.63 in. and diameter of 0.20 in. permits installation in tight spaces, PEEK thermoplastic construction provides self-lubricating qualities with low coefficient of friction to produce non-marring protection for sensitive materials. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Digital Flowmeters monitor compressed air usage and waste.

June 30, 2014

Available for schedule 40 iron pipe in ½, ¾, 1, 1½, 2, 2½, 3, and 4 in. sizes, Digital Flowmeters measure air consumption and identify trends at all critical areas or individual legs of compressed air system. LED display directly indicates SCFM or m³/hr volume of airflow. USB data logger and included software can be preinstalled or purchased separately. Summing Remote Displays, which enable users to monitor compressed air consumption from convenient location, are also available. Read More

Fluid & Gas Flow Equipment

PEEK Air Nozzle provides non-marring blowoff.

May 15, 2014

Operating at temperatures up to 320°F, Model 1104-PEEK 3/8 NPT Super Air Nozzle™ resists harsh chemicals and is suitable for blowoff, cooling, and drying applications in general industrial or corrosive environments. Amplification of airflow produces blowing force of 1.9 lb with air consumption of 35 scfm at 80 psig. Since airflow cannot be blocked, nozzle meets OSHA dead-end pressure standard 29 CFR 1910.242(b). Sound level is 82 dBA and meets OSHA noise requirement 29 CFR 1910.95(a). Read More

HVAC, Material Handling & Storage

Electrical Cabinet Coolers are resistant to heat and dirt.

April 16, 2014

By circulating 20°F air throughout electrical enclosures in hot, remote, and/or dirty environments, NEMA 12 Cabinet Cooler® Systems prevent high temperature malfunctions. Cooling capacity of up to 275 Btu/hr suits small electrical enclosures with problematic overheating, and models with 550 Btu/hr capacities are also available. Mounting through standard electrical knockout while maintaining NEMA 12/4/4X rating of enclosure, maintenance-free systems do not have any moving parts. Read More

Cleaning Products & Equipment

HEPA Vacuum Cleaner features 110 gallon capacity.

March 19, 2014

Supplied with 110 gallon drum, Heavy Duty HEPA Dry Vac filters contaminants in dusty environments requiring frequent cleaning. Pre-filter stops large particles, while HEPA filter handles smaller matter. All filters are tested for minimum 99.97% filtration at 0.3 micron level to meet HEPA standards in strict accordance to IEST-RP-CC-007. Operating at 82 dBA, industrial vacuum is OSHA and CE compliant, and suitable for wide variety of environments. Read More

Other Company News from
Exair Corp.

November 7, 2013

Chip Vac Is Now CE Compliant