Diversified Technology, Inc.
Ridgeland, MS 39157
Share:
ATCA Switch Blade features 10 G Ethernet transfer speeds.
Compliant with ATCA 3.1, Model ATS1936 provides separate control plane and data plane switching for ATCA platforms. It offers 1 Gb Ethernet switching on 3.0 Base Fabric with both 1 G and 10 G uplink ports. In addition to 3 AMC sites and front panel ports, unit supports RTM for further expandability. Both Base and Fabric networks support Layer 2 switching as well as Layer 3 routing and IPV6.
Read More »
Single Board Computer features dual core processor.
Based on IntelÃ-® E7520 Chipset, Model LBC9426 utilizes 1 or 2 Dual Core IntelÃ-® XeonÃ-® processors with 2 MB L2 cache and up to 8 GB dual-channel DDR2 SDRAM DIMMs with ECC support on 2 sockets. It includes 2 channels of 10Base-T, 100Base-TX, 1000 Base-TX Ethernet, and dual SATA channels as well as 4 USB ports, 2 serial ports, and 1 parallel port. Single x4 PCI Express link provides...
Read More »Node Blades feature 3.06 GHz processors.
Available with single or dual 64-bit Low Voltage IntelÃ-® Xeon(TM) Processors running at 3.06 GHz, Models ATC5231 and ATC5232 are designed for communication equipment based on AdvancedTCA open standards architecture. Model ATC5231 implements PICMGÃ-® 3.1 Ethernet fabric, while Model ATC5232 implements PICMGÃ-® 3.2 InifiniBand fabric to provide 10 Gb/s throughput. Both utilize...
Read More »
ATCA Node Blade is available with MontaVista Linux CGE.
Node Board ATC4130 offers MontaVista Linux Carrier Grade Edition (CGE) support, making it suited for telcom and data communications products that require high availability, fault management, and real-time performance. Featuring 2.4 GHz Xeon processor, PICMG 3.1-compliant, packet-switched processor blade uses E7501 server-class chipset with 400 MHz FSB and offers 2 on-board 10/100/1,000 Mbits/sec...
Read More »
CompactPCI Systems suit space-restricted applications.
Powered by CPB4612 processor blade, which utilizes Intel Pentium M processor, PlexSys-1 and PlexSys-2 are PICMG 2.X-compliant building blocks that provide telecom and Internet IP-based OEMs with open standards ecosystem for application solutions development. PlexSys-1 1U system features 2-slot backplane with 1 system master and 1 node slot, while PlexSys-2 2U system features 4-slot backplane with...
Read More »
Hub Board suits Dual-Star fabric-based ATCA shelf.
Compliant with PICMG 3.0/3.1 specifications, Model ATS1460 Blade provides separate control plane switching, data plane switching, and storage plane switching for ATCA shelves. It supports gigabit Ethernet on base control network, and on fabric network, it supports both gigabit Ethernet for data and 2-gigabit Fibre Channel for storage. All 3 networks are non-blocking and feature wire-speed...
Read More »
Single Board Computer features 800 MHz front side bus.
Based on Intel E7520 Chipset, Model LBC9326 features 2.8 GHz Intel Xeon processor, 1 MB L2 cache, and up to 8 GB dual channel DDR2 SDRAM DIMMs, with full ECC support on 2 sockets. Unit includes Ethernet auto-negotiating controllers, dual-channel Serial ATA support, as well as 4 USB ports, serial/parallel ports, floppy interface, PCI SVGA CRT, and flat-panel controller. Intel 6300ESB I/O...
Read More »
Dual Processor Blade suits carrier grade solutions.
Based on Intel E7520 chipset, Model ATC5231 utilizes Intel Xeon Processor with 800 MHz system bus in single or dual configurations. Board is compliant with PICMG 3.0/3.1 specifications for AdvancedTCA platforms and is capable of transferring data at 6.4 Gb/s to processor. System memory of up to 16 Gb is supported via 4 ECC-protected DDR SDRAM memory modules. Onboard integration features two...
Read More »
Computer Module addresses customizable embedded applications.
Based on Embedded Technology Extended form factor, Model eTX-Lx15 features IntelÃ-® PentiumÃ-® M processor at speeds from 1.1-1.7 GHz, IntelÃ-® 855GME chipset, and up to 1 GB PC1600/2100 DDR SDRAM on single 200-pin SODIMM socket. Integration of Intel's Extreme Graphics 2 controller provides 2D/3D performance with up to 64 MB dynamic video memory, dual channel LVDS, and simultaneous...
Read More »
SBC suits packet switched backplane platforms.
Equipped with 1.7 GHz IntelÃ-® PentiumÃ-® M processor and Intel 855GME chipset, cPB-4612 CompactPCI Blade is available with 1 MB L2 cache and complies with PICMGÃ-® 2.16 standard. System memory of up to 2 GB is supported via two PC-2700 SO-DIMMs, and product has three 10/100/1000 MBPS Ethernet controllers, Ultra-ATA IDE interface, Serial ATA, 2 PMC sites, serial ports, and floppy...
Read More »ATCA Switch Blade features 10 G Ethernet transfer speeds.
Compliant with ATCA 3.1, Model ATS1936 provides separate control plane and data plane switching for ATCA platforms. It offers 1 Gb Ethernet switching on 3.0 Base Fabric with both 1 G and 10 G uplink ports. In addition to 3 AMC sites and front panel ports, unit supports RTM for further expandability. Both Base and Fabric networks support Layer 2 switching as well as Layer 3 routing and IPV6.
Read More »
Single Board Computer features dual core processor.
Based on IntelÃ-® E7520 Chipset, Model LBC9426 utilizes 1 or 2 Dual Core IntelÃ-® XeonÃ-® processors with 2 MB L2 cache and up to 8 GB dual-channel DDR2 SDRAM DIMMs with ECC support on 2 sockets. It includes 2 channels of 10Base-T, 100Base-TX, 1000 Base-TX Ethernet, and dual SATA channels as well as 4 USB ports, 2 serial ports, and 1 parallel port. Single x4 PCI Express link provides...
Read More »Diversified Technology, Inc. to Present Series of Technical Tracks at Globalcomm
Open Sessions Being Offered on AdvancedTCA and COM Express in Booth 17051 RIDGELAND, MS - May 17, 2006 - Diversified Technology, Inc. (DTI) will be hosting interactive presentations in their booth at GLOBALCOMM 2006 (June 5th - June 7th). The series will cover three topics with multiple times for each session. Two of the overviews cover AdvancedTCA inter-workings and the third highlights the new...
Read More »Node Blades feature 3.06 GHz processors.
Available with single or dual 64-bit Low Voltage IntelÃ-® Xeon(TM) Processors running at 3.06 GHz, Models ATC5231 and ATC5232 are designed for communication equipment based on AdvancedTCA open standards architecture. Model ATC5231 implements PICMGÃ-® 3.1 Ethernet fabric, while Model ATC5232 implements PICMGÃ-® 3.2 InifiniBand fabric to provide 10 Gb/s throughput. Both utilize...
Read More »Diversified Technology, Inc. to Present at the AdvancedTCA Summit
ATCA Gotchas -- Lessons Learned from AdvancedTCA Product Development November 29th, 2005 - Diversified Technology, Inc. (DTI) announced today that Joe McDevitt, VP of Technical Development, has been invited to give a presentation during next week's AdvancedTCAÃ-® Summit in San Jose, CA. The presentation entitled ATCA Gotchas , focuses on the lessons that were learned during DTI's AdvancedTCA...
Read More »
ATCA Node Blade is available with MontaVista Linux CGE.
Node Board ATC4130 offers MontaVista Linux Carrier Grade Edition (CGE) support, making it suited for telcom and data communications products that require high availability, fault management, and real-time performance. Featuring 2.4 GHz Xeon processor, PICMG 3.1-compliant, packet-switched processor blade uses E7501 server-class chipset with 400 MHz FSB and offers 2 on-board 10/100/1,000 Mbits/sec...
Read More »
CompactPCI Systems suit space-restricted applications.
Powered by CPB4612 processor blade, which utilizes Intel Pentium M processor, PlexSys-1 and PlexSys-2 are PICMG 2.X-compliant building blocks that provide telecom and Internet IP-based OEMs with open standards ecosystem for application solutions development. PlexSys-1 1U system features 2-slot backplane with 1 system master and 1 node slot, while PlexSys-2 2U system features 4-slot backplane with...
Read More »
Hub Board suits Dual-Star fabric-based ATCA shelf.
Compliant with PICMG 3.0/3.1 specifications, Model ATS1460 Blade provides separate control plane switching, data plane switching, and storage plane switching for ATCA shelves. It supports gigabit Ethernet on base control network, and on fabric network, it supports both gigabit Ethernet for data and 2-gigabit Fibre Channel for storage. All 3 networks are non-blocking and feature wire-speed...
Read More »
Single Board Computer features 800 MHz front side bus.
Based on Intel E7520 Chipset, Model LBC9326 features 2.8 GHz Intel Xeon processor, 1 MB L2 cache, and up to 8 GB dual channel DDR2 SDRAM DIMMs, with full ECC support on 2 sockets. Unit includes Ethernet auto-negotiating controllers, dual-channel Serial ATA support, as well as 4 USB ports, serial/parallel ports, floppy interface, PCI SVGA CRT, and flat-panel controller. Intel 6300ESB I/O...
Read More »
Dual Processor Blade suits carrier grade solutions.
Based on Intel E7520 chipset, Model ATC5231 utilizes Intel Xeon Processor with 800 MHz system bus in single or dual configurations. Board is compliant with PICMG 3.0/3.1 specifications for AdvancedTCA platforms and is capable of transferring data at 6.4 Gb/s to processor. System memory of up to 16 Gb is supported via 4 ECC-protected DDR SDRAM memory modules. Onboard integration features two...
Read More »