McGill Electrical Product Group
Rosemont, IL 60018
Share:
Self-Regulating Heating Cable has flame-retardant TPE jacket.
Automatically varying its heat output with changes in surrounding temperature, SR TraceÃ-® provides freeze protection for plastic or metal pipes and vessels in ambient temperatures down to -40Ã-ºF, and maintains liquids in pipes at constant temperature. UL listed and CSA certified, waterproof cable is available in power densities of 3, 5, and 8 W/ft at 50Ã-ºF, for 120 or 240 Vac...
Read More »
Vandal-Proof Fittings are designed for long conduit runs.
Type AXB expansion fitting suits elongated conduit runs installed in areas subject to vandalism, theft, harsh weather, and wide temperature variations. Used to permit linear movement in conduit runs caused by thermal expansion, preventing conduit buckling or disconnection, AXB incorporates internal bonding jumper to facilitate installation and maintenance. No disassembly is required during...
Read More »
Lighted Rocker Switches come in various lens colors/designs.
Offered in illuminated, angled, and curved rocker versions, UL-Recognized and CSA-Certified lighted rocker switches feature Ã-¼ in. quick connect terminals that facilitate installation. Available lens colors include amber, red, clear, green, and blue. Provided with choice of terminals, circuitry, and actuators, products are illuminated via 125 Vac neon lamp (standard) and suit appliance,...
Read More »GFCI can be used with up to 3 power tools.
Portable in-line triple-tap Ground Fault Circuit Interrupter (GFCI) detects and shuts off dangerous electrical currents in less than .025 sec. With 4-6 mA trip level, manual reset, and 120 V/15 A rating, it prevents injury or electrocution resulting from water, frayed insulation, or damaged power cords. GFCI offers 2 ft SJT 12/3 AWG cable with NEMA 5-15 plugs on line side and attached molded...
Read More »GFCIs protect against accidental shocks and start-ups.
Suited for indoor or outdoor jobsites, portable Ground Fault Circuit Interrupters instantly safeguard operators of power tools, drills, washers, and other electrical equipment. UL Listed and CSA Approved, units interrupt electrical power when loads have potentially lethal ground current in excess of 4-6 mA. Contractors can choose from six 15 and 20 A, 120 and 240 V, 60 Hz models, including 11 in....
Read More »Clamps, Straps, and Hangers fasten electrical conduit.
Clamps, straps, and hangers assist contractors in running and anchoring electrical conduit. Clamps are formed from malleable iron with galvanized finish, and accommodate conduit in trade sizes from Ã-½-6 in. They secure rigid or flexible metal conduits, and IMC or EMT running across, parallel, or perpendicular to beams, channels, cable tray, and angle supports. Steel hangers and snap-type...
Read More »
Motor Controls prevent accidental start-ups.
After voltage drop or power interruption, Sensing-Safti-Gard(TM) motor controls prevent accidental machine start-ups. Built-in sensor blocks control from resetting until equipment switch has been turned off. UL/CUL recognized controls are suited for use with equipment driven by small single phase motors operating on 120 or 240 Vac that are connected to power source by means of 14 gauge, 3-wire...
Read More »
Power Conditioner protects inductive loads.
SOLATRON(TM) Plus 3-Phase Power Conditioner protects against common power problems by providing true voltage regulation, surge protection, and noise isolation. Within input voltage range of -25 to +15%, unit produces output voltage of less than Ã-
Read More »
Raintight Couplings feature external inspection aid.
UL listed Raintight EMT steel compression-type couplings and connectors feature InspectoRidge for visual identification. By observing the ridge, electrical inspector can determine if outdoor, wet, or damp installation requiring raintight couplings and connectors is up to code. Products are offered in Ã-½-1 in. sizes with internal sealing ring and gasket. Rugged steel construction has a zinc...
Read More »
Cable Ties have weather-resistant design.
Tie-Max(TM) cable ties, available for mounting and non-mounting applications, come in standard or weather-resistant designs. Tensile strength ranges from 18-175 lb with cable lengths from 3.78-30 in. Mounting cables have tensile strength from 18-50 lb with lengths from 3.94-8.07 in. Weather-resistant ties have Carbonate A, which offers UV resistance.
Read More »
Self-Regulating Heating Cable has flame-retardant TPE jacket.
Automatically varying its heat output with changes in surrounding temperature, SR TraceÃ-® provides freeze protection for plastic or metal pipes and vessels in ambient temperatures down to -40Ã-ºF, and maintains liquids in pipes at constant temperature. UL listed and CSA certified, waterproof cable is available in power densities of 3, 5, and 8 W/ft at 50Ã-ºF, for 120 or 240 Vac...
Read More »
Vandal-Proof Fittings are designed for long conduit runs.
Type AXB expansion fitting suits elongated conduit runs installed in areas subject to vandalism, theft, harsh weather, and wide temperature variations. Used to permit linear movement in conduit runs caused by thermal expansion, preventing conduit buckling or disconnection, AXB incorporates internal bonding jumper to facilitate installation and maintenance. No disassembly is required during...
Read More »
Lighted Rocker Switches come in various lens colors/designs.
Offered in illuminated, angled, and curved rocker versions, UL-Recognized and CSA-Certified lighted rocker switches feature Ã-¼ in. quick connect terminals that facilitate installation. Available lens colors include amber, red, clear, green, and blue. Provided with choice of terminals, circuitry, and actuators, products are illuminated via 125 Vac neon lamp (standard) and suit appliance,...
Read More »GFCI can be used with up to 3 power tools.
Portable in-line triple-tap Ground Fault Circuit Interrupter (GFCI) detects and shuts off dangerous electrical currents in less than .025 sec. With 4-6 mA trip level, manual reset, and 120 V/15 A rating, it prevents injury or electrocution resulting from water, frayed insulation, or damaged power cords. GFCI offers 2 ft SJT 12/3 AWG cable with NEMA 5-15 plugs on line side and attached molded...
Read More »GFCIs protect against accidental shocks and start-ups.
Suited for indoor or outdoor jobsites, portable Ground Fault Circuit Interrupters instantly safeguard operators of power tools, drills, washers, and other electrical equipment. UL Listed and CSA Approved, units interrupt electrical power when loads have potentially lethal ground current in excess of 4-6 mA. Contractors can choose from six 15 and 20 A, 120 and 240 V, 60 Hz models, including 11 in....
Read More »Clamps, Straps, and Hangers fasten electrical conduit.
Clamps, straps, and hangers assist contractors in running and anchoring electrical conduit. Clamps are formed from malleable iron with galvanized finish, and accommodate conduit in trade sizes from Ã-½-6 in. They secure rigid or flexible metal conduits, and IMC or EMT running across, parallel, or perpendicular to beams, channels, cable tray, and angle supports. Steel hangers and snap-type...
Read More »
Motor Controls prevent accidental start-ups.
After voltage drop or power interruption, Sensing-Safti-Gard(TM) motor controls prevent accidental machine start-ups. Built-in sensor blocks control from resetting until equipment switch has been turned off. UL/CUL recognized controls are suited for use with equipment driven by small single phase motors operating on 120 or 240 Vac that are connected to power source by means of 14 gauge, 3-wire...
Read More »
Power Conditioner protects inductive loads.
SOLATRON(TM) Plus 3-Phase Power Conditioner protects against common power problems by providing true voltage regulation, surge protection, and noise isolation. Within input voltage range of -25 to +15%, unit produces output voltage of less than Ã-
Read More »
Raintight Couplings feature external inspection aid.
UL listed Raintight EMT steel compression-type couplings and connectors feature InspectoRidge for visual identification. By observing the ridge, electrical inspector can determine if outdoor, wet, or damp installation requiring raintight couplings and connectors is up to code. Products are offered in Ã-½-1 in. sizes with internal sealing ring and gasket. Rugged steel construction has a zinc...
Read More »
Cable Ties have weather-resistant design.
Tie-Max(TM) cable ties, available for mounting and non-mounting applications, come in standard or weather-resistant designs. Tensile strength ranges from 18-175 lb with cable lengths from 3.78-30 in. Mounting cables have tensile strength from 18-50 lb with lengths from 3.94-8.07 in. Weather-resistant ties have Carbonate A, which offers UV resistance.
Read More »