Company News

Anritsu Company

1155 E. Collins Blvd., Suite 100, Richardson, TX, 75081, USA

  • 800-267-4878

Latest New Product News from
Anritsu Company

Test & Measuring Instruments

MP1900A Bit Error Rate Tester features built-in Pulse Pattern Generator.

Jul 07, 2017

Integrating Jitter Measurement, Emphasis, Equalizer and unique Link Negotiation functions, MP1900A SQA Bit Error Rate Tester is used for conducting PCI Express Gen 4 and Gen 5 tests, LTSSM status analysis, jitter generation, and CM/DM noise injection. Featuring an intuitive GUI with 12.1 in. touch-panel display, unit can measure performance of network-side interfaces, such as 400 GbE, 200 GbE,... Read More

Test & Measuring Instruments

MT8862A Wireless Connectivity Tester can be remotely operated.

Apr 26, 2017

Used for verifying WLAN chipsets designed into smartphones, smart home electronics and connected cars, MT8862A Wireless Connectivity Tester supports IEEE802.11ac/n/a/g/b WLAN protocol. Operated via web browser from control PC connected by Ethernet, unit can be easily maintained and calibrated. Product can measure performance of 802.11ac-capable WLAN device under test.

Read More

Test & Measuring Instruments

Integrated BERT and DAC tests 400 GbE designs.

Aug 08, 2016

Generating clean eye diagrams at up to 128 Gbps/channel, integrated Signal Quality Analyzer MP1800A BERT and G0361A 64 Gbaud 2-bit D/A Converter enables engineers to verify that high-speed devices, modules, and network systems are in compliance with industry standards, including 400 GbE and CEI-56G. With dual-channel 2x1 multiplexing function in input section, G0361A can generate signals from 32... Read More

Test & Measuring Instruments

Receiver Test System optimizes device evaluation efficiency.

Mar 08, 2016

Featuring MP1800A BERT, noise-generating signal source, and real-time oscilloscope controlled by GRL-TBT3-RXA software, Thunderbolt Receiver Test Solution supports calibration of complex test signals required for evaluating Thunderbolt devices. MP1800A not only supports high-reproducibility receiver tests, but also evaluation of high-speed serial interfaces, such as 100 GbE and InfiniBand.... Read More

Test & Measuring Instruments

Small Cell Manufacturing Tester supports cellular, wireless, LBS.

Mar 06, 2015

Optimized for high-volume manufacturing environments, MT8870A Universal Test Set lets chipset and device manufacturers standardize on one solution to validate products that integrate numerous technologies. Turnkey small cell manufacturing test solution supports technologies such as cellular, WLAN 802.11ac (Wi-Fi®), Bluetooth®, ZigBee (802.15.4), and such location-based services as GPS.... Read More

Software, Test & Measuring Instruments

Multi-Protocol Transport Tester supports up to 400G (4 x 100G).

Nov 03, 2014

Portable, 4-port MT1100A Network Master™ Flex tests transport equipment in field during optical network installation/maintenance, in R&D labs, and on manufacturing floor. Supporting testing of emerging OTN networks as well as legacy Ethernet, Fiber Channel, SDH/SONET, and PDH/DSn systems, all-in-one modular platform supports various interfaces and bit rates from 1.5M to 100G. Three dual-port... Read More

Computer Hardware & Peripherals, Test & Measuring Instruments

All-in-One OTN Tester enables full/multi-stage mapping.

Jul 31, 2014

Supporting WLAN, Bluetooth, and LAN connectivity for remote operation, dual-port MT1000A Network Master Pro lets users conduct Optical Transport Network (OTN) mapping of all client signals as well as multi-stage mapping. Capability to measure with Ethernet and SDH/SONET client signals helps technicians install and maintain mobile and fixed-access, metro, and core transmission networks. Together... Read More

Software, Test & Measuring Instruments

Conformance Test System supports LTE Band 13.

Jul 16, 2014

Designed to verify that LTE terminal and base station signaling communication procedures comply with 3GPP standards, ME7834L Protocol Conformance Test System provides validated test cases across bands for U.S. market, including unique coverage in LTE Band 13. System supports market-leading LTE/LTE Advanced and VoLTE technologies, and is used for mobile carrier acceptance tests in North America... Read More

Test & Measuring Instruments

BERT Signal Quality Analyzer meets high-speed data testing needs.

Nov 13, 2013

MP1800A is available with 4PAM and 8PAM converters that respectively support generation of 4- and 8-level Pulse Amplitude Modulation (PAM) data signals for testing data transmission up to 32.1 Gbps. Together, these products provide test solution for Next Generation Network designs. Internal pulse pattern generator and high-input-sensitivity error detector module can each be configured... Read More

Test & Measuring Instruments

Error Detector offers Rx sensitivity of 10 mV.

Nov 05, 2013

Available for MP1800A BERT signal quality analyzer, Error Detector supports multichannel BER measurements up to 32.1 Gbps. Auto Adjust function permits simultaneous search in less than 1 second and automatically detects optimum BER voltage threshold and phase levels for up to 8 channels. With test solution, engineers can verify that high-speed backplanes, cables, and interconnects are in... Read More

Computer Hardware & Peripherals, Sensors Monitors & Transducers, Test & Measuring Instruments

Cable and Antenna Analyzer covers 2 MHz to 4 GHz range.

Jul 05, 2012

Providing return loss, cable loss, and Distance-to-Fault measurements, Site Master S331L features sweep speed per data point of 1.5 msec, accelerating identification of intermittent problems in real-time. Built-in InstaCal(TM) provides one-connection calibration anytime, while built-in power meter enables testing of RF power in field environments. Dust- and splash-resistant with 7 in. backlit TFT... Read More

Computer Hardware & Peripherals, Test & Measuring Instruments

Broadband VNA System has 4-port measurement capability.

Jul 03, 2012

Able to be used for 4-port and differential mm-wave component development, VectorStar® ME7838A Vector Network Analyzer (VNA) features stability, real-time power leveling control, and 70-110 GHz frequency coverage. This test tool can be mounted on probe station using standard positioners and includes MS4640A VectorStar and 3739A test set, which operates mm-wave modules. Dynamic range is 108 dB... Read More

Computer Hardware & Peripherals, Test & Measuring Instruments

Vector Network Analyzers measure noise figure.

Jul 03, 2012

With Option MS4640A-041, VectorStar MS4640A and ME7838A are capable of measuring noise figure from 70 kHz to 125 GHz, enabled in part by receiver optimized for measurements from 30-125 GHz. Noise figure measurements enable test engineers to determine potential degradation of signal-to-noise ratio from system components in applications including radar, wireless communications, and digital... Read More

Optics & Photonics, Test & Measuring Instruments

Spectrum Analyzers are available with tracking generator.

May 18, 2012

Configured with tracking generator, Spectrum Master(TM) MS2711E, MS2712E, and MS2713E are designed with CW generator and respectively cover frequency ranges of 500 kHz to 3, 4, and 6 GHz to aid field technicians with network deployment, installation, and maintenance. Power accuracy procedure removes inaccuracies caused by temperature variations, while touchscreen-enabled UI simplifies measurement... Read More

Test & Measuring Instruments

Backplane Tester is designed for interconnects up to 28 Gbit/sec.

Feb 09, 2011

Jitter tolerance and 4Tap pre-emphasis solution includes MP1800A Signal Quality Analyzer that has built-in pulse pattern generator and error detector with input sensitivity of 10 mV. Product also includes MU181500B Jitter Modulation Source and MP1825B 4Tap Emphasis instrument, which has four taps that can be set as pre- or post-cursors with 20 dB setting range. System generates pre-emphasis... Read More

Communication Systems & Equipment, Test & Measuring Instruments

Passive Intermodulation Analyzer optimizes network performance.

Jan 07, 2011

Covering PCS and AWS cellular frequency ranges, MW8219A PIM Master(TM) accurately locates source of passive intermodulation. Field personnel can use PIM Master to generate 2 high-power tones in transmit band of base station, and use supported handheld analyzer to measure 3rd, 5th, or 7th order intermodulation products in receive band that travel down same cable. With 40 W testing, unit can locate... Read More

Automatic ID, Test & Measuring Instruments

Radio Communication Analyzer measures LTE device parametrics.

Jul 30, 2010

Capable of conducting TS36.521-1-compliant transmit and receive tests, Model MT8820C can serve as Enhanced Node B signaling simulator. Tester fully supports multiple modes from 2G to 4G, including GSM/GPRS/E-GPRS, 1xRTT/1xEV-DO, TD-SCDMA/HSPA, W-CDMA/HSPA, and LTE. Functional tests include voice calls, video calls, and current consumption, while parametric tests include UE transmitter and... Read More

Software, Test & Measuring Instruments

Signaling Tester verifies performance of HSPA products.

Jul 30, 2010

Building on existing Dual Carrier downlink capability, MD8480C is available with Release 8 HSPA Evolution software. Latter includes features for testing Uplink Continuous Packet Connectivity and provides developers of 3GPP protocol stacks, chipsets, and application software with test tool to verify performance. Fully 3GPP-compliant, modular base station/network simulator, supporting up to 2 RFs,... Read More

Electronic Components & Devices

RF/Microwave Signal Generators offer low phase noise.

Jul 30, 2010

With rated phase noise of -115 dB/Hz and frequency generation capabilities from 0.1 Hz to 70 GHz, MG3690C Series lets engineers conduct accurate subsystem tests. Baseband, IF, RF, and microwave signals can be produced from one instrument, and functionality ensures DUTs are stimulated with known good signals. Capabilities also include generation of narrow pulses down to 10 ns; amplitude leveled... Read More

Computer Hardware & Peripherals, Test & Measuring Instruments

Microwave Vector Network Analyzer covers 70 kHz to 70 GHz range.

Jan 27, 2010

Built on Open Windows architecture, MS4640A Series microwave Vector Network Analyzer (VNA) is used for characterizing devices, optimizing designs, and maximizing throughput. If offers broad frequency span from single coaxial test port, covering 70 kHz to 70 GHz in a single instrument and 70 kHz to 110 GHz in Broadband configuration. VNA can achieve synthesized sweeps at 20 µsec/point, offers... Read More

Other Company News from
Anritsu Company