Automatic Timing & Controls
Lancaster, PA 17605
Share:
Pump Controller is field programmable.
NEMA 4x, set-point Model APC100 suits submersible pump applications when analog sensors are used for level detection. Signal selection ranges are 4-20 mA, 0-5 V, and 0-10 V. Controller offers full duplexing action for pump-up/pump-down functions, 2 relay outputs for level alarm indication, 2 meters to log hours of operation, run and fail status contacts, 2 runtime meters, 2 local HOA switches,...
Read More »
Power Detector features NEMA 4X encapsulated package.
Universal Power Alert, Model UPA 130 provides detection and indication of line power from 40-750 Vac and/or stored energy from 30-1,000 Vdc. It offers protection beyond OSHA Lock-Out/Tag-Out regulations by providing visual indication of hazardous energy after enclosure is locked and tagged. Flashing LEDs indicate presence of hazardous conditions associated with stored energy, operator error,...
Read More »
Relay monitors 3-phase voltage from 208-600 Vac.
Model SLU-600-ASDS Universal Phase Monitor provides protection against premature equipment failure caused by poor 3-phase power quality. It employs pluggable cage clamp terminal blocks, as well as optional DIN rail/flat surface mounting. Relay provides scalable selection of imbalance percentage, fault, restart delay, and visual fault status indication with auxiliary alarm contacts.
Read More »
Digital Panel Meter suits process control industry.
Model 3830 SMART Rate/Totalizer panel meter includes up to one Form-A, 5 A and three Form-C, 5 A output relays. Microprocesser-based process controller offers 4 analog outputs or RS 232 serial communication. Active in background or foreground, 6-digit totalizer delivers scaled pulsed output to PLCs or other controllers. Unit is available in various DC voltage or current inputs: 0-5 Vdc, 0-10 Vdc,...
Read More »
Frequency Input Rate/Totalizer suits process control industry.
Model 3870 SMART digital panel meter series, with 6-digit totalizer mode, can incorporate 1 Form-A, 5 A relay output and 3 Form-C, 5 A relay outputs. With 4 analog outputs or RS 232 serial communications, microprocesser-based process controller provides rate measurements with pulse rate inputs as low as 1 pulse per 100 sec. Setup entries include time base scale, offset, and K factor. Offerings...
Read More »
Indicator/Controller suits process control industry.
Series 3820 SMART digital panel meter has option set that includes up to 4 relay outputs (1 Form-A 5 A standard and 3 Form-C 5 A optional), 4 analog outputs, or RS232 serial communications. Red LED display offers six, 0.5 in., 7-segment characters. User-selectable digital scale and offset converts input signal to any desired unit of measure. Input choices include 4-20 mA, 0-5 Vdc, and 0-10 Vdc....
Read More »
Solid State Flasher operates at 1 A resistive.
Model ETN-120-AFT-75 AC Flasher features 2 wire leads, totally encapsulated circuitry, and molded case with built in mounting unit. Flash rate is factory set at 75 flashes per minute. Custom rates between 45 and 150 are available.
Read More »
Voltage Detector indicates presence of ac and dc voltage.
Universal Power Alert Model UPA-100 provides verification of zero energy, detection of single- or 3-phase ac voltage from 40-750 Vac, detection of dc or stored energy from 30-1000 Vdc, and redundant circuitry. Flashing LEDs on epoxy-encapsulated NEMA 4 enclosure advise observer if voltage is present without aid of additional equipment. Compliance to OSHA requirements regarding Verification of...
Read More »
Electronic Overload Relay protects motors.
Microprocessor-based, MotorGuardian(TM) MPA-1000 provides protection for 3-phase ac motors, pumps, and compressors. It installs in new or retrofit applications using 2-piece, clip-on current transformers. DIN-rail mount enclosure includes 2-line, 16-character, vacuum-fluorescent display.
Read More »
Voltage Indicator flashes if power present.
SP-0252A can be installed on 120 to 575 Vac, 50/60/400 Hz equipment or phase-to-phase distribution panels. UL-approved epoxy encapsulated enclosure has flashing LEDs to advise observer if voltage is present. It employs 4 independently operated voltage detectors. Each detector has 2 LEDs in series for better visibility. Three detectors monitor phase-to-phase voltage while fourth detector checks...
Read More »
Pump Controller is field programmable.
NEMA 4x, set-point Model APC100 suits submersible pump applications when analog sensors are used for level detection. Signal selection ranges are 4-20 mA, 0-5 V, and 0-10 V. Controller offers full duplexing action for pump-up/pump-down functions, 2 relay outputs for level alarm indication, 2 meters to log hours of operation, run and fail status contacts, 2 runtime meters, 2 local HOA switches,...
Read More »
Power Detector features NEMA 4X encapsulated package.
Universal Power Alert, Model UPA 130 provides detection and indication of line power from 40-750 Vac and/or stored energy from 30-1,000 Vdc. It offers protection beyond OSHA Lock-Out/Tag-Out regulations by providing visual indication of hazardous energy after enclosure is locked and tagged. Flashing LEDs indicate presence of hazardous conditions associated with stored energy, operator error,...
Read More »
Relay monitors 3-phase voltage from 208-600 Vac.
Model SLU-600-ASDS Universal Phase Monitor provides protection against premature equipment failure caused by poor 3-phase power quality. It employs pluggable cage clamp terminal blocks, as well as optional DIN rail/flat surface mounting. Relay provides scalable selection of imbalance percentage, fault, restart delay, and visual fault status indication with auxiliary alarm contacts.
Read More »
Digital Panel Meter suits process control industry.
Model 3830 SMART Rate/Totalizer panel meter includes up to one Form-A, 5 A and three Form-C, 5 A output relays. Microprocesser-based process controller offers 4 analog outputs or RS 232 serial communication. Active in background or foreground, 6-digit totalizer delivers scaled pulsed output to PLCs or other controllers. Unit is available in various DC voltage or current inputs: 0-5 Vdc, 0-10 Vdc,...
Read More »
Frequency Input Rate/Totalizer suits process control industry.
Model 3870 SMART digital panel meter series, with 6-digit totalizer mode, can incorporate 1 Form-A, 5 A relay output and 3 Form-C, 5 A relay outputs. With 4 analog outputs or RS 232 serial communications, microprocesser-based process controller provides rate measurements with pulse rate inputs as low as 1 pulse per 100 sec. Setup entries include time base scale, offset, and K factor. Offerings...
Read More »
Indicator/Controller suits process control industry.
Series 3820 SMART digital panel meter has option set that includes up to 4 relay outputs (1 Form-A 5 A standard and 3 Form-C 5 A optional), 4 analog outputs, or RS232 serial communications. Red LED display offers six, 0.5 in., 7-segment characters. User-selectable digital scale and offset converts input signal to any desired unit of measure. Input choices include 4-20 mA, 0-5 Vdc, and 0-10 Vdc....
Read More »
Solid State Flasher operates at 1 A resistive.
Model ETN-120-AFT-75 AC Flasher features 2 wire leads, totally encapsulated circuitry, and molded case with built in mounting unit. Flash rate is factory set at 75 flashes per minute. Custom rates between 45 and 150 are available.
Read More »
Voltage Detector indicates presence of ac and dc voltage.
Universal Power Alert Model UPA-100 provides verification of zero energy, detection of single- or 3-phase ac voltage from 40-750 Vac, detection of dc or stored energy from 30-1000 Vdc, and redundant circuitry. Flashing LEDs on epoxy-encapsulated NEMA 4 enclosure advise observer if voltage is present without aid of additional equipment. Compliance to OSHA requirements regarding Verification of...
Read More »
Electronic Overload Relay protects motors.
Microprocessor-based, MotorGuardian(TM) MPA-1000 provides protection for 3-phase ac motors, pumps, and compressors. It installs in new or retrofit applications using 2-piece, clip-on current transformers. DIN-rail mount enclosure includes 2-line, 16-character, vacuum-fluorescent display.
Read More »
Voltage Indicator flashes if power present.
SP-0252A can be installed on 120 to 575 Vac, 50/60/400 Hz equipment or phase-to-phase distribution panels. UL-approved epoxy encapsulated enclosure has flashing LEDs to advise observer if voltage is present. It employs 4 independently operated voltage detectors. Each detector has 2 LEDs in series for better visibility. Three detectors monitor phase-to-phase voltage while fourth detector checks...
Read More »