Latest New Product News from
Omega Engineering, Inc.
RH700 invasive/non-invasive moisture meter reads humidity and moisture values, including ambient temperature, RH, absolute humidity, relative moisture level using pinless sensor, absolute moisture level using included pin-type probe, and dew point temperature. Up to 8,000 data points can be logged internally for recall on LCD or downloaded for display in graph or table format. Users include water damage restoration contractors, facility maintenance pros, and HVAC system installers. Read More
OM-CP-HITEMP140X2-FP Series uses 2 probes that can measure up to 662°F with ±0.18°F accuracy. Offered in combination of flexible PFA insulation and bendable stainless steel, dual probes allow for simultaneous monitoring and can be used for oven mapping, surface temperature monitoring, autoclave validation, and sterilization processes. Flexible probes are maneuverable and suited for temperature monitoring inside small vials, test tubes, and other small-diameter or delicate applications. Read More
Suitable for universities and laboratories, PLATINUM™ Series CNPT-DEMO Demonstration/Evaluation Kit offers fully integrated temperature control system to investigate use of closed loop (PID) and simple on/off temperature control in heating and cooling applications. System features smart menu flow, panel mounted USB and Ethernet connectivity, alarm indicator, and 4–20 mA remote set-point indicator. Aluminum plate allows users to feel temperature response. Read More
Equipped with metal-oxide semiconductor sensor, Model HHAQ-107 measures mixed gas volatile organic compound levels as part of indoor air quality maintenance program. Handheld unit can detect ammonia, toluene, ethanol, hydrogen sulfide, and cigarette smoke as well as ambient temperature, relative humidity, dew point, and wet bulb temperature. Suitable for HVAC and IAQ technicians, meter includes data logging software, backlit dual-readout LCD, and adjustable high VOC concentration audible alarm. Read More
FM-certified for hazardous locations, OMEGA® PX51-IS/PXM51-IS Series feature all-stainless steel construction with thick film sensing element. Gage, absolute, and sealed gage models are available with selection of outputs and unique dual fitting. Along with 4–20 mA output and 10–28 Vdc excitation voltage, features include ±0.25% FS accuracy (combined linearity, hysteresis, repeatability); 100 MΩ @ 50 Vdc min resistance between body and wire; and 60 to 160°F compensated temperature range.
Equipped with 32-bit, 120 MHz ARM processor, PT-DEMO PID Controller is suitable for investigating use of closed loop and simple on/off temperature control in heating and cooling applications. System features intuitive smart menu flow, panel mounted USB and Ethernet connectivity, alarm indicator, 4–20 mA remote setpoint potentiometer, and pushbutton digital input. With aluminum plate, users can feel temperature response. PT-DEMO operates on 12 Vdc, 2 A non-hazardous power. Read More
Featuring lightweight, handheld design, OMEGA® HHF-312 measures ambient temperature, humidity, barometric pressure, wind speed, and direction. Unit also calculates wind chill index and dew point/wet bulb temperatures. Equipped with dual backlit LCD readouts and compass, HHF-312 can store/recall 20 readings. Tripod-mountable meter includes data hold button, 5-minute auto power-off, and battery charge indicator. Application examples include environmental studies and HVAC troubleshooting. Read More
Respectively capable of logging temperature and temperature/relative humidity (RH) data, battery-operated OM-91 and OM-92 measure temperature to accuracy of ±0.3°C over 5 to 60°C range and ±2.0°C over full -30 to 80°C range. RH is measured to accuracy of ±3.0% RH over 20%–80% range and ±5.0% RH over 0%–100% range. Features immediate, delayed, or pushbutton start; real-time mode; user-configurable High and Low alarms; and USB interface for data transfer. Logging rate is software selectable. Read More
Based on non-depleting, component-specific paramagnetic measurement technique, OMEGA GAB-1700 offers full scale range of 0–100% O2 and minimum output range of 0–1% O2. Unit provides ±0.1% accuracy and response time of less than 15 seconds. Available with rechargeable battery option for mobile use, analyzer meets demanding needs of field and laboratory analysts, light industrial users, and others who require fast and accurate analysis of common gas mixtures. Read More
Featuring analog and digital input and outputs, CE-compliant iNET-400 series directly connects to thermocouple, RTD, thermistor, strain gage, load cell, voltage, current, resistance, and accelerometer inputs. Software, instruNet World, is available with this expandable and modular DAQ system, which is suited for chemical/petrochemical, automotive, water, electronics, lab, and R&D applications. Read More
Powered by four AA batteries, Model OSXL-TIM3 displays thermal image and temperature on 2.8 in. color LCD. Fully automatic, focus-free imager can save thermal images to included 8 GB micro SD card. Software that transfers images to PC is also included for image review and reporting of details on saved images. CE-compliant camera is suitable for inspection and diagnostics in factory automation, process control, building HVAC, and solar power generation. Read More
Featuring portable, battery-operated design, OM-91 logs temperature, while OM-92 logs both temperature and RH. Temperature is measured to accuracy of ±0.3°C over 5–60°C range and ±2.0°C over full range of -30 to 80°C. Relative humidity is measured to accuracy of ±3.0% RH over 20–80% range and ±5.0% RH over 0–100% range. Suited for transportation applications, loggers feature user-configurable high/low alarms, LED status indicators, USB interface, and immediate, delayed, or pushbutton start. Read More
FM rated for use in hazardous locations, intrinsically safe pressure transmitters are available with various choices of pressure ranges/capacities, electrical terminations, connector options, and cable (including submersible and waterproof) options. All feature stainless steel construction and are designed for use in range of classes and zones. Read More
Compatible with Type K thermocouples, OS499 Series offers measurement range up to 1,400°F with distance to spot ratio up to 30:1. Non-contact temperature measuring devices feature dual lasers for optimized targeting, built-in flashlight, mini thermocouple socket up to 2,552°F, and large LCD with power backlight that enables night and low light viewing. Powered by two AAA batteries, thermometers use color bar to display temperature in Max/Min mode. Read More
Installed via clip or clamp to indicate positive or negative air flow of fans, CE-compliant FSW800B series is available with reed/magnet contact and comes in NO and NC configurations. Housing measures 1.3 x 0.7 x 0.3 in. and is constructed of black, UL 94HB plastic. When properly installed and connected in series with optical or audible signaling device, bi-directional switch will activate electrical contact if air flow falls below 8.2 fps – either turning the signaling device on or off. Read More
Measuring different sensor inputs such as thermocouple, RTD, relative humidity, and pH, UWBT Series transmits data to smartphone or tablet via wireless Bluetooth communication. App running on iOS or Android™ phone/tablet monitors and logs sensor data and displays data in digital, graph, or gauge format. It can be configured in 9 languages and can be paired with multiple transmitters simultaneously. Logging up to 10 samples/sec, UWBT Series can send data files to email address or Cloud. Read More
Capable of amplifying and converting ultrasonic sounds to frequencies and levels that human ear can hear, HHLT-1 Series detects air and gas leaks. CE-compliant unit is suitable for both pressure and vacuum leak detection, steam trap inspection, and exhaust system, tank, and pipe leak testing. Powered by 9 V alkaline battery, detector operates from 32–104°F. Read More
Designed to measure CO concentration, humidity, and air temperature, AQM-103 Series is suited for indoor air quality diagnosis and HVAC performance verification. CE-compliant device features large LCD that shows measurements as well as date and time with programmable high alarm and audible/visible LED warning light for high CO concentration. With CO measurement range from 0–999 ppm, monitor/data logger offers 1 ppm resolution and accuracy of ±5% of reading or ±10 ppm, whichever is greater. Read More
Equipped with 3-color, 9-segment LED display, PLATINUM™ Series offers universal inputs supporting thermocouples, RTDs, thermistors, and process voltage/current. Display offers wide viewing angle and full scale positive and negative readings. In addition to USB communications and remote latch reset, meters come standard with built-in excitation firmware selectable at 5, 10, 12, and 24 V. Ethernet, RS232/RS485 with MODBUS® serial communications, and alarm relays are optional. Read More
Used to perform autoclave validations, OM-CP-AVS140 series comprises complete, CE-compliant systems that enable compliance with FDA 21 CFR Part 11. Model OM-CP-AVS140-1 includes one datalogger for temperature monitoring, while OM-CP-AVS140-6 includes 6 dataloggers: 5 for temperature and one for pressure monitoring. Areas of use for this series include pharmaceutical, food processing, R&D, and laboratory applications. Read More
Other Company News from
Omega Engineering, Inc.