Topper Industrial
Sturtevant, WI 53177
Topper Industrial's Trans4mer Cart
Sturtevant, WI -January 27, 2009 - Topper Industrial, a leading material handling equipment manufacturing introduces the TRANS4MER cart. The TRANS4MER cart is a (4) four-wheel steering cart that transforms into a (2) two-wheel steering, hand-operated pushcart. The TRANS4MER cart was designed to optimize efficiency. Having a cart that is equally as maneuverable as it is while being pulled by a...
Read More »
Completely Unload an Entire Rack from One Side
Sturtevant, WI -May 10, 2006 - In keeping with developing safe, ergonomic, innovative material handling products Topper Industrial introduces the slide shelf rack. The slide shelf rack allows an operator to unload an entire rack from one side eliminating the need to rotate a shelf rack. The Topper Industrial slide shelf rack is constructed with non-rusting roller mechanisms which improve the life...
Read More »
Material Handling Cart holds 2 dollies.
Suited for forklift-free environments, E-Cart hydraulically lifts dollies approximately 1 in. off ground using foot pumps and lowers dollies with turn of relief valve. It will always be tugged rather than manually moved so casters can be soft, pliable wheels that will be quiet, shed debris, and not skid around corners. Dollies have hard wheels that facilitate pushing and maneuvering.
Read More »
Quad Steer Carts travel in-line.
Quad-Steer Carts are used in tugging situations where cart remains attached to tugger to deliver commodities in specific route. With all 4 wheels turning, radius of rear wheels follow front wheels, facilitating cornering. Regardless of number hitched together, all carts follow same track around corners. Featuring removable, self-locking sides, cart is available in many types and sizes including...
Read More »
Tilt Cart offers max capacity of 1,000 lb and 60-
Tilt Carts feature adjustable, closed-loop, hydraulic dampening cylinder, which controls energy of load as it tilts, providing safe, controlled, tilt movement in full-to-empty applications. With tilt of 60Ã-
Read More »
Tilt Stand is suited for heavy-duty use.
Radical Tilt Stand pivots at center of gravity using pendulum design, while low-pressure pneumatic cylinder, requiring minimum of 60 psi, performs rotation. Stand is equipped with standard pilot check valves and speed control valve. Controls can be mounted on stand for hand operation or on floor for foot operation. Radical Tilt Stand is used when part is loaded vertically into container, or when...
Read More »
Tilt Cart uses foot pedal for tilting.
Pump-Up Tilt Cart features pump-up device on speed-control dampening cylinder for tilting heavy loads. User can return partial/full load to level position by pumping foot pedal minimal number of strokes. Cart can be returned to upright position when change-over is required before container is empty. It is also suited for empty-to-full applications.
Read More »
Cart allows workers to dig deep into containers.
Ergo-Cart tilts high-wall containers up to 30Ã-
Read More »
Carts extend reach of conveyor systems.
Transfer Conveyor Carts enable containers to come off and on conveyor line, and move to other areas. Once in position, slight push of no more than 35 lb sets cart to abut conveyor line, even when fully loaded to max capacity of 3,000 lb. Roller top enables containers to roll off and on line. Foot-operated hydraulic pump operates shift mechanism on cart and is able to shift 6 in. in either...
Read More »Topper Industrial Carts with Tuggers Save Energy, they Consume Less Energy than Forklifts Because Forklifts Require Two Electric Motors
Tugs consume less energy than forklifts because forklifts require two electric motors - one to lift and another to operate the drive - while tugs need only one motor, according to Topper Industrial. Most of the energy forklifts consume is lifting loads. Because tugs and carts handle more load volume per move, less energy is consumed than by the multiple trips a forklift must make to deliver the...
Read More »Topper Industrial and Vecna Robotics Partner to Pull Fork Truck Free and Lean Initiatives into the Future
STURTEVANT, WI - Topper Industrial, a leading manufacturer in fork truck free cart delivery equipment and material handling solutions, announced a partnership today with Vecna Robotics, a recognized leader in next-generation robotics and autonomous fleet vehicles. Together, the two companies bundle and offer the most advanced and cost-effective tugger with the most reputable and innovative cart...
Read More »Topper Industrial Leasing Program Improves Cash Flow in Acquisition of Industrial Carts
Topper Industrial, the leader in the North American Fork Truck Free movement, announced a strategic alliance with GSG Financial LLC. From large manufacturers to tier 3 suppliers, the adoption of Fork Truck Free is much easier to consider with the new equipment leasing option. According to Ryan Brown, President of Topper Industrial, “Many manufacturing businesses prefer equipment leasing as a...
Read More »Topper Industrial Partners with GSG Financial LLC Making Fork Truck Free Affordable
Topper Industrial, the leader in the North American Fork Truck Free movement, announced a strategic alliance with GSG Financial LLC. From large manufacturers to tier 3 suppliers, the adoption of Fork Truck Free is much easier to consider with the new equipment leasing option. According to Ryan Brown, President of Topper Industrial, “Many manufacturing businesses prefer equipment leasing as a...
Read More »
Topper Industrial's Trans4mer Cart
Sturtevant, WI -January 27, 2009 - Topper Industrial, a leading material handling equipment manufacturing introduces the TRANS4MER cart. The TRANS4MER cart is a (4) four-wheel steering cart that transforms into a (2) two-wheel steering, hand-operated pushcart. The TRANS4MER cart was designed to optimize efficiency. Having a cart that is equally as maneuverable as it is while being pulled by a...
Read More »
Completely Unload an Entire Rack from One Side
Sturtevant, WI -May 10, 2006 - In keeping with developing safe, ergonomic, innovative material handling products Topper Industrial introduces the slide shelf rack. The slide shelf rack allows an operator to unload an entire rack from one side eliminating the need to rotate a shelf rack. The Topper Industrial slide shelf rack is constructed with non-rusting roller mechanisms which improve the life...
Read More »
Material Handling Cart holds 2 dollies.
Suited for forklift-free environments, E-Cart hydraulically lifts dollies approximately 1 in. off ground using foot pumps and lowers dollies with turn of relief valve. It will always be tugged rather than manually moved so casters can be soft, pliable wheels that will be quiet, shed debris, and not skid around corners. Dollies have hard wheels that facilitate pushing and maneuvering.
Read More »
Quad Steer Carts travel in-line.
Quad-Steer Carts are used in tugging situations where cart remains attached to tugger to deliver commodities in specific route. With all 4 wheels turning, radius of rear wheels follow front wheels, facilitating cornering. Regardless of number hitched together, all carts follow same track around corners. Featuring removable, self-locking sides, cart is available in many types and sizes including...
Read More »
Tilt Cart offers max capacity of 1,000 lb and 60-
Tilt Carts feature adjustable, closed-loop, hydraulic dampening cylinder, which controls energy of load as it tilts, providing safe, controlled, tilt movement in full-to-empty applications. With tilt of 60Ã-
Read More »
Tilt Stand is suited for heavy-duty use.
Radical Tilt Stand pivots at center of gravity using pendulum design, while low-pressure pneumatic cylinder, requiring minimum of 60 psi, performs rotation. Stand is equipped with standard pilot check valves and speed control valve. Controls can be mounted on stand for hand operation or on floor for foot operation. Radical Tilt Stand is used when part is loaded vertically into container, or when...
Read More »