SMAC Moving Coil Actuators
Carlsbad, CA 92008
New LDL Actuator Features Acceleration of 100 G
Offered with very strong neo denium magnets. Features precision laser cut housing and end caps. Available with cycle rates of up to 2000 a minute.
Read More »New LDL Actuator Features Acceleration of 100 G
Offered with very strong neo denium magnets. Features precision laser cut housing and end caps. Available with cycle rates of up to 2000 a minute.
Read More »New Brushless High Torque Motor with Peak Torque of 0.5 Nm at 48 VDC, 4 Amp
HT35 is brushless which means there is no internal friction, pollution or sparking from brushes and no inherent voltage brush drop. Available with maximum efficiency of 85%, resistance of 13.4 Ohms and inductance of 1.7 mH. Specification includes rated torque of 121 mNm at 0.9 A and rated speed at 2035 RPM.
Read More »New Brushless High Torque Motor with Peak Torque of 0.5 Nm at 48 VDC, 4 Amp
HT35 is brushless which means there is no internal friction, pollution or sparking from brushes and no inherent voltage brush drop. Available with maximum efficiency of 85%, resistance of 13.4 Ohms and inductance of 1.7 mH. Specification includes rated torque of 121 mNm at 0.9 A and rated speed at 2035 RPM.
Read More »New LBL25 Series linear Actuator from SMAC Comes with Plate Design
Equipped with proprietary encoder and gives >100 million cycle life and features flat printed coil and single-piece, screw down magnets. Offers stroke length of 25mm and 50mm and extends up to 200 mm. Generates peak force 60N and fast with accelerations over 50G.
Read More »New LBL25 Series linear Actuator from SMAC Comes with Plate Design
Equipped with proprietary encoder and gives >100 million cycle life and features flat printed coil and single-piece, screw down magnets. Offers stroke length of 25mm and 50mm and extends up to 200 mm. Generates peak force 60N and fast with accelerations over 50G.
Read More »MGR6 Series Micro Gripper features Soft-Land routine.
SMAC MGR6 Series Micro Gripper has a stroke of 10mm (5 each), peak force of 3.8 N, and force constant of 11.5 N/A with 55 x 47.5 x 24 mm dimensions. Unit comes with capabilities such as programmable and controllable position, velocity and force and high accelerations. Jaws can be controlled independently to ensure precise force control, measurement, and positioning. Units are suitable for...
Read More »MGR6 Series Micro Gripper features Soft-Land routine.
SMAC MGR6 Series Micro Gripper has a stroke of 10mm (5 each), peak force of 3.8 N, and force constant of 11.5 N/A with 55 x 47.5 x 24 mm dimensions. Unit comes with capabilities such as programmable and controllable position, velocity and force and high accelerations. Jaws can be controlled independently to ensure precise force control, measurement, and positioning. Units are suitable for...
Read More »SMAC Moving Coil Actuators are IP 67 rated.
SMAC Moving Coil Actuators are available in LAL95 and LCA50 series. Units are suitable for food- and beverage-handling equipment applications and are dust-proof and water-proof. LAL95 offers peak force of 195N and maximum stroke of 50mm whereas LCA50 provides force up to 110N and stroke of 50mm.
Read More »SMAC Moving Coil Actuators are IP 67 rated.
SMAC Moving Coil Actuators are available in LAL95 and LCA50 series. Units are suitable for food- and beverage-handling equipment applications and are dust-proof and water-proof. LAL95 offers peak force of 195N and maximum stroke of 50mm whereas LCA50 provides force up to 110N and stroke of 50mm.
Read More »New LDL Actuator Features Acceleration of 100 G
Offered with very strong neo denium magnets. Features precision laser cut housing and end caps. Available with cycle rates of up to 2000 a minute.
Read More »New LDL Actuator Features Acceleration of 100 G
Offered with very strong neo denium magnets. Features precision laser cut housing and end caps. Available with cycle rates of up to 2000 a minute.
Read More »New Brushless High Torque Motor with Peak Torque of 0.5 Nm at 48 VDC, 4 Amp
HT35 is brushless which means there is no internal friction, pollution or sparking from brushes and no inherent voltage brush drop. Available with maximum efficiency of 85%, resistance of 13.4 Ohms and inductance of 1.7 mH. Specification includes rated torque of 121 mNm at 0.9 A and rated speed at 2035 RPM.
Read More »New Brushless High Torque Motor with Peak Torque of 0.5 Nm at 48 VDC, 4 Amp
HT35 is brushless which means there is no internal friction, pollution or sparking from brushes and no inherent voltage brush drop. Available with maximum efficiency of 85%, resistance of 13.4 Ohms and inductance of 1.7 mH. Specification includes rated torque of 121 mNm at 0.9 A and rated speed at 2035 RPM.
Read More »New LBL25 Series linear Actuator from SMAC Comes with Plate Design
Equipped with proprietary encoder and gives >100 million cycle life and features flat printed coil and single-piece, screw down magnets. Offers stroke length of 25mm and 50mm and extends up to 200 mm. Generates peak force 60N and fast with accelerations over 50G.
Read More »New LBL25 Series linear Actuator from SMAC Comes with Plate Design
Equipped with proprietary encoder and gives >100 million cycle life and features flat printed coil and single-piece, screw down magnets. Offers stroke length of 25mm and 50mm and extends up to 200 mm. Generates peak force 60N and fast with accelerations over 50G.
Read More »MGR6 Series Micro Gripper features Soft-Land routine.
SMAC MGR6 Series Micro Gripper has a stroke of 10mm (5 each), peak force of 3.8 N, and force constant of 11.5 N/A with 55 x 47.5 x 24 mm dimensions. Unit comes with capabilities such as programmable and controllable position, velocity and force and high accelerations. Jaws can be controlled independently to ensure precise force control, measurement, and positioning. Units are suitable for...
Read More »MGR6 Series Micro Gripper features Soft-Land routine.
SMAC MGR6 Series Micro Gripper has a stroke of 10mm (5 each), peak force of 3.8 N, and force constant of 11.5 N/A with 55 x 47.5 x 24 mm dimensions. Unit comes with capabilities such as programmable and controllable position, velocity and force and high accelerations. Jaws can be controlled independently to ensure precise force control, measurement, and positioning. Units are suitable for...
Read More »SMAC Moving Coil Actuators are IP 67 rated.
SMAC Moving Coil Actuators are available in LAL95 and LCA50 series. Units are suitable for food- and beverage-handling equipment applications and are dust-proof and water-proof. LAL95 offers peak force of 195N and maximum stroke of 50mm whereas LCA50 provides force up to 110N and stroke of 50mm.
Read More »SMAC Moving Coil Actuators are IP 67 rated.
SMAC Moving Coil Actuators are available in LAL95 and LCA50 series. Units are suitable for food- and beverage-handling equipment applications and are dust-proof and water-proof. LAL95 offers peak force of 195N and maximum stroke of 50mm whereas LCA50 provides force up to 110N and stroke of 50mm.
Read More »