Ophir Optics, LLC
North Andover, MA 01845
Photodiode Sensor measures scanned/intermittent laser beam power.
Able to measure any wavelength overÃ- 400–1,100 nm spectral range, BC20-V1 laser sensor automatically subtracts backgroundÃ- from both scanned and static beams. Sensor can measure power of laser bar code scanners as well as laser printer scanners and peak power of pulsed mode lasers. Aperture is 10 x 10 mm, and power measurement range is 0.1–20 mW. Supplied with 1.5 m cable and swivel...
Read More »OPHIR Photonics Introduces New, Highest Damage Threshold Coating for High Power Laser Sensors
North Logan, Utah - Ophir Photonics, global leader in precision laser measurement equipment and a Newport Corporation brand, today announced the addition of a more damage resistant coating to the company's high power laser sensors in the 300W to 1500W range. The L300W-LP, FL400A-LP, 1000W-LP, and L1500W-LP sensors now feature the improved LP1 absorber. Designed for continuous power and long >1ms...
Read More »Laser Beam Profiling Camera has large array, GigE interface.
With 320 x 320 pixel pyroelectric array that can profile beams up to 25 mm without reduction optics, Pyrocam IV measures pulsed and CW (continuous wave) lasers from 13–355 nm and 1.06 to greater than 3,000 Ã-µm. Electronics control design includes interface to GigE (Gigabit Ethernet) cameras, and integral focal plane chopper is included for CW beams and thermal imaging. Other features...
Read More »
Scanning Slit Laser Beam Profiler features USB2 interface.
Using moving slits, NIST-calibrated NanoScan 2 measures continuous wave (CW) and pulsed beams across spectral range from UV to far IR. Beam size and beam pointing can be measured with 3 sigma precision of several hundred nanometers. While USB2 interface provides deep, 12-bit digitization of signal for dynamic range up to 35 dB power, digital controller improves accuracy and stability of...
Read More »Laser Beam Profiling System measures widths to 35 mm.
Along with 4008 x 2672 pixel format that allows profiling of beams up to 24 x 36 mm without requiring reduction optics, L11059 USB Large Format Beam Profiling Camera features 50 mm ND filters that provide max power density measurements to 15 mW/cmÃ-² without additional attenuation. Frame rates of up to 3.1 fps are supported at full resolution (up to 17 Hz in 4x4 binning mode). Featuring 59 dB...
Read More »Laser Beam Propagation Analyzer measures M-² at any wavelength.
Combining NanoScan near-field profiler with dedicated MÃ-² measurement hardware and software, NanoModeScan enables quantitative measurement and viewing of high-power CO2 laser beams in as little as 20 sec. System also reports beam waist diameter and location, divergence, and beam's Rayleigh range for each axis. With update rate of 20 Hz, system is suitable for CO2 laser-based material...
Read More »IPL Detector offers digital power scales of 300 W/30 W.
Featuring 0.5-1 Ã-µm spectral range and 65 mm aperture, convection-cooled L50(300)A-IPL (Intense Pulsed Light) detector is designed for applications in medical and cosmetic dermatology markets that call for very large beams, single shot energy, or IPL sources. It has window for gel coupled IPL sources, where IPL source is coupled to window where gel or water is used for measurement. Energy...
Read More »
Power and Energy Meter takes CW and pulsed measurements.
Suited for low-power lasers, model 12A thermal surface absorber head measures power and energy from 2 mW to 12 W. It is spectrally flat from 0.19-20 Ã-µm and has power density rating up to 25 kW/cmÃ-². With power accuracy of Ã-
Read More »Pyroelectric Detector measures rep rates up to 20 kHz.
Designed for measurement of high rep rate lasers, Model PE9-F can measure up to max pulse width of 0.5 Ã-µs and provides pulse energy measurements from 0.3 Ã-µJ to 1 mJ. Spectral response with metallic absorber is 0.19-12 Ã-µm with energy scales of 1 mJ, 200 Ã-µJ, 20 Ã-µJ and 2 Ã-µJ. Operating with Nova II and USB interface only, Model PE9-F features average power of 2 W...
Read More »Photodiode Power Meter features high power density filter.
Recommended for low power CW and pulsed lasers, Model PD300-3W measures up to 3 W at most wavelengths and up to 150 W/cmÃ-² without saturation or damage. It has power range from nW to 3 W and spectral response from 350-1,100 nm. With automatic background subtraction, 95-98% of background is cancelled under normal room conditions. For pulsed lasers, Model PD300-3W has max pulse energy of 20...
Read More »Photodiode Sensor measures scanned/intermittent laser beam power.
Able to measure any wavelength overÃ- 400–1,100 nm spectral range, BC20-V1 laser sensor automatically subtracts backgroundÃ- from both scanned and static beams. Sensor can measure power of laser bar code scanners as well as laser printer scanners and peak power of pulsed mode lasers. Aperture is 10 x 10 mm, and power measurement range is 0.1–20 mW. Supplied with 1.5 m cable and swivel...
Read More »OPHIR Photonics Introduces New, Highest Damage Threshold Coating for High Power Laser Sensors
North Logan, Utah - Ophir Photonics, global leader in precision laser measurement equipment and a Newport Corporation brand, today announced the addition of a more damage resistant coating to the company's high power laser sensors in the 300W to 1500W range. The L300W-LP, FL400A-LP, 1000W-LP, and L1500W-LP sensors now feature the improved LP1 absorber. Designed for continuous power and long >1ms...
Read More »Laser Beam Profiling Camera has large array, GigE interface.
With 320 x 320 pixel pyroelectric array that can profile beams up to 25 mm without reduction optics, Pyrocam IV measures pulsed and CW (continuous wave) lasers from 13–355 nm and 1.06 to greater than 3,000 Ã-µm. Electronics control design includes interface to GigE (Gigabit Ethernet) cameras, and integral focal plane chopper is included for CW beams and thermal imaging. Other features...
Read More »
Scanning Slit Laser Beam Profiler features USB2 interface.
Using moving slits, NIST-calibrated NanoScan 2 measures continuous wave (CW) and pulsed beams across spectral range from UV to far IR. Beam size and beam pointing can be measured with 3 sigma precision of several hundred nanometers. While USB2 interface provides deep, 12-bit digitization of signal for dynamic range up to 35 dB power, digital controller improves accuracy and stability of...
Read More »Laser Beam Profiling System measures widths to 35 mm.
Along with 4008 x 2672 pixel format that allows profiling of beams up to 24 x 36 mm without requiring reduction optics, L11059 USB Large Format Beam Profiling Camera features 50 mm ND filters that provide max power density measurements to 15 mW/cmÃ-² without additional attenuation. Frame rates of up to 3.1 fps are supported at full resolution (up to 17 Hz in 4x4 binning mode). Featuring 59 dB...
Read More »Laser Beam Propagation Analyzer measures M-² at any wavelength.
Combining NanoScan near-field profiler with dedicated MÃ-² measurement hardware and software, NanoModeScan enables quantitative measurement and viewing of high-power CO2 laser beams in as little as 20 sec. System also reports beam waist diameter and location, divergence, and beam's Rayleigh range for each axis. With update rate of 20 Hz, system is suitable for CO2 laser-based material...
Read More »NEW 2007 Catalog Features Ophir Laser Power/Energy Meters and Spiricon Beam Profilers
Logan, UT (August 13, 2007) - Ophir-Spiricon, Inc. announces the release of their new 2007, 154 page, four color, Laser Power/Energy Meter and Beam Profiler instruments catalog. The new catalog has been updated with additional new products from both organizations. The 2007 catalog includes information on Ophir's entire line of Photodiode, Thermal, Pyroelectric, Repetitive Pulse and OEM...
Read More »IPL Detector offers digital power scales of 300 W/30 W.
Featuring 0.5-1 Ã-µm spectral range and 65 mm aperture, convection-cooled L50(300)A-IPL (Intense Pulsed Light) detector is designed for applications in medical and cosmetic dermatology markets that call for very large beams, single shot energy, or IPL sources. It has window for gel coupled IPL sources, where IPL source is coupled to window where gel or water is used for measurement. Energy...
Read More »
Power and Energy Meter takes CW and pulsed measurements.
Suited for low-power lasers, model 12A thermal surface absorber head measures power and energy from 2 mW to 12 W. It is spectrally flat from 0.19-20 Ã-µm and has power density rating up to 25 kW/cmÃ-². With power accuracy of Ã-
Read More »Pyroelectric Detector measures rep rates up to 20 kHz.
Designed for measurement of high rep rate lasers, Model PE9-F can measure up to max pulse width of 0.5 Ã-µs and provides pulse energy measurements from 0.3 Ã-µJ to 1 mJ. Spectral response with metallic absorber is 0.19-12 Ã-µm with energy scales of 1 mJ, 200 Ã-µJ, 20 Ã-µJ and 2 Ã-µJ. Operating with Nova II and USB interface only, Model PE9-F features average power of 2 W...
Read More »