Steck Manufacturing Company, Inc.
Dayton, OH 45417
Share:
Hose Clamp Tool facilitates replacement of hoses.
Hose Clamp Combo Tool, Model 71459, combines 2 captive clamps made from hardened steel to fit over wire clamps. Attaching Ã-¼ in. ratchet to tool's thumb screw end or hand turning thumb screw pinches clamp tabs to release clamp's hold on hose. Tool maintains clamp tension so clamp will not spring, allowing hose to be removed and replaced versus cutting clamp. Tool works on any Vehicle Class...
Read More »Multiple-Use Scraping Tool will not gouge surface.
EZ Scraper Tool (P/N 71515) provides body technicians and mechanics with means to perform straight push scraping as well as gouge-free pull scraping for paint, sealant, and/or gasket removal. This mirror-finished, dual-edged, stainless steel scraper measures 9 in. long and incorporates 90Ã-
Read More »Multi-Purpose Tool helps repair body lines.
Non-marring HandyBar features chisel end that allows technician to repair body lines in sheet metal without scraping off rust protective coating. Long flat surfaces of tool enable technicians to spring door panels and pound out high spots in sheet metal without scratching surfaces.
Read More »Tool removes door hinge bushings.
Used with hammer and punch, Bushing Tool Model 21825 can remove and install door hinge bushings. Offset design allows access to both door half and body half hinges to punch out bushings while maintaining bushing alignment.
Read More »Radius Clamp pulls damaged A/B pillars and roof panels.
Featuring side pull ring and optional top pull ring, multi-angled BigBite Radius Clamp attaches directly to pinchweld curvature and rocker panel pinchweld for all size door openings to allow technician to apply damp tension. It features 35 heat-treated teeth that allow it to clamp directly to A-Pillar, B-Pillar, rocker, and roof panels for repair rather than replacement.
Read More »Curved Clamp pulls SUV and van hatch openings.
Bulldog Curved Clamp grabs and holds onto curved pinchweld where other clamps will not attach. Unit pulls pinchweld to accurately seal weatherstrip to hatch. Individually adjustable teeth assure secure attachment, while elongated hole accepts almost any hook.
Read More »Chisel separates spot welded/bonded panels.
Model P/N 20015 Seam Buster Chisel is designed for use on quarter panels, rockers, and any other pinchweld. It is sharpened on 2 edges. Sharp end allows for penetration between panels and side edge allows for side impact to drive panels apart without damage. It is made from alloy steel and has cushioned handle to absorb shock.
Read More »Nut Setter is suited for automotive applications.
Rivet Nut Setter installs No. 8 to Ã-¼-20 steel and aluminum threaded inserts (rivet nuts) in sheet metal. It works anywhere nuts need to be installed, but where no access is available to back side. Able to get into tight spots, it can be used with air ratchet. User operates tool by extending Setter Slide; assembling bolt, washer, and rivet nut on Setter; and tightening Setter Slide bolt to...
Read More »Illuminated Tool unlocks most cars and trucks.
BigEasy(TM) Illuminator Kit No. 32960 includes non-marring plastic wedge and lock knob lifter. Tip of unit contains LED that illuminates entire lock button area. LED is powered by 2 AA batteries located in handle with push button on/off switch.
Read More »Adapter Plate Kit simplifies engine removal.
EngineOut Kit helps remove engine from front engine/rear wheel vans. It comes in choice of Chevy, Chrysler, or one of 3 Ford Engine Plates. Adapter Plate bolts to front of engine where water pump has been removed. Hoist Arm installs in engine hoist and Angle Adjuster controls engine tilt. With engine held by front instead of top, user can easily lift and tilt engine as necessary for removal and...
Read More »Hose Clamp Tool facilitates replacement of hoses.
Hose Clamp Combo Tool, Model 71459, combines 2 captive clamps made from hardened steel to fit over wire clamps. Attaching Ã-¼ in. ratchet to tool's thumb screw end or hand turning thumb screw pinches clamp tabs to release clamp's hold on hose. Tool maintains clamp tension so clamp will not spring, allowing hose to be removed and replaced versus cutting clamp. Tool works on any Vehicle Class...
Read More »Multiple-Use Scraping Tool will not gouge surface.
EZ Scraper Tool (P/N 71515) provides body technicians and mechanics with means to perform straight push scraping as well as gouge-free pull scraping for paint, sealant, and/or gasket removal. This mirror-finished, dual-edged, stainless steel scraper measures 9 in. long and incorporates 90Ã-
Read More »Multi-Purpose Tool helps repair body lines.
Non-marring HandyBar features chisel end that allows technician to repair body lines in sheet metal without scraping off rust protective coating. Long flat surfaces of tool enable technicians to spring door panels and pound out high spots in sheet metal without scratching surfaces.
Read More »Tool removes door hinge bushings.
Used with hammer and punch, Bushing Tool Model 21825 can remove and install door hinge bushings. Offset design allows access to both door half and body half hinges to punch out bushings while maintaining bushing alignment.
Read More »Radius Clamp pulls damaged A/B pillars and roof panels.
Featuring side pull ring and optional top pull ring, multi-angled BigBite Radius Clamp attaches directly to pinchweld curvature and rocker panel pinchweld for all size door openings to allow technician to apply damp tension. It features 35 heat-treated teeth that allow it to clamp directly to A-Pillar, B-Pillar, rocker, and roof panels for repair rather than replacement.
Read More »Curved Clamp pulls SUV and van hatch openings.
Bulldog Curved Clamp grabs and holds onto curved pinchweld where other clamps will not attach. Unit pulls pinchweld to accurately seal weatherstrip to hatch. Individually adjustable teeth assure secure attachment, while elongated hole accepts almost any hook.
Read More »Chisel separates spot welded/bonded panels.
Model P/N 20015 Seam Buster Chisel is designed for use on quarter panels, rockers, and any other pinchweld. It is sharpened on 2 edges. Sharp end allows for penetration between panels and side edge allows for side impact to drive panels apart without damage. It is made from alloy steel and has cushioned handle to absorb shock.
Read More »Nut Setter is suited for automotive applications.
Rivet Nut Setter installs No. 8 to Ã-¼-20 steel and aluminum threaded inserts (rivet nuts) in sheet metal. It works anywhere nuts need to be installed, but where no access is available to back side. Able to get into tight spots, it can be used with air ratchet. User operates tool by extending Setter Slide; assembling bolt, washer, and rivet nut on Setter; and tightening Setter Slide bolt to...
Read More »Illuminated Tool unlocks most cars and trucks.
BigEasy(TM) Illuminator Kit No. 32960 includes non-marring plastic wedge and lock knob lifter. Tip of unit contains LED that illuminates entire lock button area. LED is powered by 2 AA batteries located in handle with push button on/off switch.
Read More »Adapter Plate Kit simplifies engine removal.
EngineOut Kit helps remove engine from front engine/rear wheel vans. It comes in choice of Chevy, Chrysler, or one of 3 Ford Engine Plates. Adapter Plate bolts to front of engine where water pump has been removed. Hoist Arm installs in engine hoist and Angle Adjuster controls engine tilt. With engine held by front instead of top, user can easily lift and tilt engine as necessary for removal and...
Read More »