Share:
639A91 ICP® Triaxial Accelerometer is made of 316L stainless steel.
Delivering frequency response on three axes up to 10 kHz, 639A91 ICP® Triaxial Accelerometer comes in foot print of 24.1 mm x 24.1 mm size. Equipped with four-pin M12 connector, unit comes with frequency range of 0.5 to 10,000 Hz. Product is suitable to identify high-frequency gearbox faults, motor and pump high-frequency bearing faults.
Read More »639A91 ICP-® Triaxial Accelerometer is made of 316L stainless steel.
Delivering frequency response on three axes up to 10 kHz, 639A91 ICP® Triaxial Accelerometer comes in foot print of 24.1 mm x 24.1 mm size. Equipped with four-pin M12 connector, unit comes with frequency range of 0.5 to 10,000 Hz. Product is suitable to identify high-frequency gearbox faults, motor and pump high-frequency bearing faults.
Read More »IMI Sensors Announces CSA Approval for Models EX611A00 and EX611A20
Extreme Temperature, Charge-Mode Accelerometer Now Certified as Intrinsically-Safe in US and Canada November 23, 2016 DEPEW, NY - IMI Sensors, manufacturer of industrial vibration and pressure monitoring instrumentation, announces CSA approval on Models EX611A00 and EX611A20, two extreme temperature, charge mode accelerometers with a UHT-12™ sensing element. This approval now allows the two...
Read More »IMI Sensors Announces CSA Approval for Models EX611A00 and EX611A20
Extreme Temperature, Charge-Mode Accelerometer Now Certified as Intrinsically-Safe in US and Canada November 23, 2016 DEPEW, NY - IMI Sensors, manufacturer of industrial vibration and pressure monitoring instrumentation, announces CSA approval on Models EX611A00 and EX611A20, two extreme temperature, charge mode accelerometers with a UHT-12™ sensing element. This approval now allows the two...
Read More »Temperature Charge Pressure Sensors used in gas turbine applications
Available in 176A03 and 176A05 models, Temperature Charge Pressure Sensors are used in combustion instability monitoring of power generation and aviation gas turbines. Eliminating need for vent, units featires UHT-12 crystal technology and prevents pyroelectric noise spikes up to 1200°F. Delivering consistent sensitivity through wide temperature change, products retain oxygen levels inside unit.
Read More »Temperature Charge Pressure Sensors used in gas turbine applications
Available in 176A03 and 176A05 models, Temperature Charge Pressure Sensors are used in combustion instability monitoring of power generation and aviation gas turbines. Eliminating need for vent, units featires UHT-12 crystal technology and prevents pyroelectric noise spikes up to 1200°F. Delivering consistent sensitivity through wide temperature change, products retain oxygen levels inside unit.
Read More »Charge Accelerometer targets gas turbine applications.
Designed for Gas Turbine Applications and Other 900 °F (482 °C) Environments DEPEW, NY - IMI Sensors, manufacturer of industrial vibration monitoring instrumentation, announced the release of Model 357A100, a very high temperature differential charge accelerometer with a UHT-12™ sensing element. This accelerometer is for use in the commissioning of nuclear power plants, condition...
Read More »Charge Accelerometer targets gas turbine applications.
Designed for Gas Turbine Applications and Other 900 -°F (482 °C) Environments DEPEW, NY - IMI Sensors, manufacturer of industrial vibration monitoring instrumentation, announced the release of Model 357A100, a very high temperature differential charge accelerometer with a UHT-12™ sensing element. This accelerometer is for use in the commissioning of nuclear power plants,...
Read More »Stainless Steel Accelerometers feature M12 connector.
DEPEW, NY – IMI Sensors, manufacturer of industrial vibration monitoring instrumentation, announced the release of three new low-cost ICP® accelerometers with an M12 connector designed for predictive maintenance vibration monitoring. - Model 601A92 is a 500 mV/g ICP® accelerometer with a measurement range of ±10g and a frequency range (±3 dB) of 0.17 to 10,000 Hz. The sensor is housed...
Read More »Stainless Steel Accelerometers feature M12 connector.
DEPEW, NY- – IMI Sensors, manufacturer of industrial vibration monitoring instrumentation, announced the release of three new low-cost ICP® accelerometers with an M12 connector designed for predictive maintenance vibration monitoring. - Model 601A92 is a 500 mV/g ICP® accelerometer with a measurement range of ±10g and a frequency range (±3 dB) of 0.17 to 10,000 Hz. The...
Read More »639A91 ICP® Triaxial Accelerometer is made of 316L stainless steel.
Delivering frequency response on three axes up to 10 kHz, 639A91 ICP® Triaxial Accelerometer comes in foot print of 24.1 mm x 24.1 mm size. Equipped with four-pin M12 connector, unit comes with frequency range of 0.5 to 10,000 Hz. Product is suitable to identify high-frequency gearbox faults, motor and pump high-frequency bearing faults.
Read More »639A91 ICP-® Triaxial Accelerometer is made of 316L stainless steel.
Delivering frequency response on three axes up to 10 kHz, 639A91 ICP® Triaxial Accelerometer comes in foot print of 24.1 mm x 24.1 mm size. Equipped with four-pin M12 connector, unit comes with frequency range of 0.5 to 10,000 Hz. Product is suitable to identify high-frequency gearbox faults, motor and pump high-frequency bearing faults.
Read More »IMI Sensors Announces CSA Approval for Models EX611A00 and EX611A20
Extreme Temperature, Charge-Mode Accelerometer Now Certified as Intrinsically-Safe in US and Canada November 23, 2016 DEPEW, NY - IMI Sensors, manufacturer of industrial vibration and pressure monitoring instrumentation, announces CSA approval on Models EX611A00 and EX611A20, two extreme temperature, charge mode accelerometers with a UHT-12™ sensing element. This approval now allows the two...
Read More »IMI Sensors Announces CSA Approval for Models EX611A00 and EX611A20
Extreme Temperature, Charge-Mode Accelerometer Now Certified as Intrinsically-Safe in US and Canada November 23, 2016 DEPEW, NY - IMI Sensors, manufacturer of industrial vibration and pressure monitoring instrumentation, announces CSA approval on Models EX611A00 and EX611A20, two extreme temperature, charge mode accelerometers with a UHT-12™ sensing element. This approval now allows the two...
Read More »Temperature Charge Pressure Sensors used in gas turbine applications
Available in 176A03 and 176A05 models, Temperature Charge Pressure Sensors are used in combustion instability monitoring of power generation and aviation gas turbines. Eliminating need for vent, units featires UHT-12 crystal technology and prevents pyroelectric noise spikes up to 1200°F. Delivering consistent sensitivity through wide temperature change, products retain oxygen levels inside unit.
Read More »Temperature Charge Pressure Sensors used in gas turbine applications
Available in 176A03 and 176A05 models, Temperature Charge Pressure Sensors are used in combustion instability monitoring of power generation and aviation gas turbines. Eliminating need for vent, units featires UHT-12 crystal technology and prevents pyroelectric noise spikes up to 1200°F. Delivering consistent sensitivity through wide temperature change, products retain oxygen levels inside unit.
Read More »Charge Accelerometer targets gas turbine applications.
Designed for Gas Turbine Applications and Other 900 °F (482 °C) Environments DEPEW, NY - IMI Sensors, manufacturer of industrial vibration monitoring instrumentation, announced the release of Model 357A100, a very high temperature differential charge accelerometer with a UHT-12™ sensing element. This accelerometer is for use in the commissioning of nuclear power plants, condition...
Read More »Charge Accelerometer targets gas turbine applications.
Designed for Gas Turbine Applications and Other 900 -°F (482 °C) Environments DEPEW, NY - IMI Sensors, manufacturer of industrial vibration monitoring instrumentation, announced the release of Model 357A100, a very high temperature differential charge accelerometer with a UHT-12™ sensing element. This accelerometer is for use in the commissioning of nuclear power plants,...
Read More »Stainless Steel Accelerometers feature M12 connector.
DEPEW, NY – IMI Sensors, manufacturer of industrial vibration monitoring instrumentation, announced the release of three new low-cost ICP® accelerometers with an M12 connector designed for predictive maintenance vibration monitoring. - Model 601A92 is a 500 mV/g ICP® accelerometer with a measurement range of ±10g and a frequency range (±3 dB) of 0.17 to 10,000 Hz. The sensor is housed...
Read More »Stainless Steel Accelerometers feature M12 connector.
DEPEW, NY- – IMI Sensors, manufacturer of industrial vibration monitoring instrumentation, announced the release of three new low-cost ICP® accelerometers with an M12 connector designed for predictive maintenance vibration monitoring. - Model 601A92 is a 500 mV/g ICP® accelerometer with a measurement range of ±10g and a frequency range (±3 dB) of 0.17 to 10,000 Hz. The...
Read More »