Company News

IMI Sensors

3425 Walden Avenue, Depew, NY, 14043, USA

  • 800-959-4464

Latest New Product News from
IMI Sensors

Sensors Monitors & Transducers

639A91 ICP® Triaxial Accelerometer is made of 316L stainless steel.

Jul 13, 2017

Delivering frequency response on three axes up to 10 kHz, 639A91 ICP® Triaxial Accelerometer comes in foot print of 24.1 mm x 24.1 mm size. Equipped with four-pin M12 connector, unit comes with frequency range of 0.5 to 10,000 Hz. Product is suitable to identify high-frequency gearbox faults, motor and pump high-frequency bearing faults.

Read More

Sensors Monitors & Transducers

Temperature Charge Pressure Sensors used in gas turbine applications

Nov 18, 2016

Available in 176A03 and 176A05 models, Temperature Charge Pressure Sensors are used in combustion instability monitoring of power generation and aviation gas turbines. Eliminating need for vent, units featires UHT-12 crystal technology and prevents pyroelectric noise spikes up to 1200°F. Delivering consistent sensitivity through wide temperature change, products retain oxygen levels inside... Read More

Sensors Monitors & Transducers

Charge Accelerometer targets gas turbine applications.

Aug 04, 2016

Equipped with UHT-12™ sensing element, Model 357A100 Differential Charge Accelerometer is suited for use in commissioning of nuclear power plants, condition monitoring of power generation and aviation gas turbines, and machinery protection in very high temperature environments. UHT-12™ crystal technology features sensitivity that remains consistent over wide temperature change, absence of... Read More

Sensors Monitors & Transducers

Stainless Steel Accelerometers feature M12 connector.

May 03, 2016

ICP® accelerometers, designed for predictive maintenance vibration monitoring, include models 601A92 (500 mV/g), 602D91 (100 mV/g), and 603C91 (100 mV/g) with respective measurement ranges of ±10, ±50, and ±50 g and frequency ranges (±3 dB) of 0.17–10,000 Hz, 0.5–8,000 Hz, and 0.5–10,000 Hz. While 601A92 and 603C91 have 316L stainless steel housing with ¼-28... Read More

Mechanical Power Transmission, Sensors Monitors & Transducers

Differential Charge Accelerometers monitor gas turbines.

Nov 20, 2015

Designed for environments up to 500°F, Model EX615A42- offers sensitivity of 100 pC/g, measurement range of ±200 g peak, and frequency range (±5%) of 5 kHz. Sensor has stainless steel housing with 10 ft armored, PTFE cable terminating in pigtails. Model EX619A11-, operating up to 900°F, offers sensitivity of 50 pC/g, measurement range of ±500 g peak, and frequency range (±5%) of... Read More

Sensors Monitors & Transducers

Triaxial ICP Accelerometer is approved for hazardous areas.

Oct 15, 2015

Developed for use in route-based predictive maintenance in hazardous environments in conjunction with third-party, multi-channel data collectors and analyzers, Model EX629A11A/006CC delivers sensitivity 100 mV/g (±10%), ±50 g pk measurement range, and frequency ranges (±3 dB) of 2–10,000 Hz in Z axis and 2–7,000 Hz in X and Y axes. Model is housed in epoxy-sealed, stainless... Read More

Sensors Monitors & Transducers

Charge Accelerometers suit applications up to 900°F.

Sep 24, 2015

Supplied in Nickel 625 housing with 2-pin mini-MIL side connector, Series 357C includes Models 357C71/EX357C71 with sensitivity of 10 pC/g, Models 357C72/EX357C72 with sensitivity of 50 pC/g, and Model 357C73 with 100 pC/g sensitivity. Differential charge accelerometers are electrically case-isolated devices suited for commissioning of nuclear power plants, condition monitoring of power... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

High Frequency Accelerometer features integral magnet.

Aug 07, 2015

Supplied in welded hermetic stainless steel housing with integral over-braided polyurethane cable and integral flat rare-earth magnet, Model 607M123/YYYCC is suited for route-based vibration monitoring. Unit features sensitivity of 100 mV/g, peak measurement range of ±50 g, and frequency range of 0.5–13,000 Hz (±3 dB). Accelerometer is configurable with choice of cable length and... Read More

Mechanical Power Transmission, Sensors Monitors & Transducers

Piezoelectric Accelerometer monitors rolling element bearings.

Oct 30, 2013

Combining accelerometer and 4–20 mA transmitter in single housing, Bearing Fault Detector PLUS Model 649A03 provides 5 specialized outputs that, when used with control system, deliver early warning of bearing defects such as cracked races, brinelling, looseness, and spalling. Scaled output can be used to both trend data and trigger vibration alarms in PLC or DCS to closely monitor when... Read More

Electrical Equipment & Systems, Sensors Monitors & Transducers

Mechanical Vibration Switch offers fine linear adjustment.

Jun 18, 2013

Along with respective measurement and frequency ranges of 0–10 g pk and 0–6,000 cpm (0–100 Hz), Model 685A09 Linear Adjust Mechanical Vibration Switch features linear trip adjustment of ~1/4 turn per g that optimizes control over trip sensitivity. Other features include DPDT relay, 10 A dry contacts, and remote reset options of 120 and 240 Vac as well as 24 Vdc. Applications include cooling... Read More

Sensors Monitors & Transducers

Charge Mode Accelerometer survives temperatures to 1,300°F.

Jun 04, 2013

Featuring 10 ft of integral hard-line cable terminating in LEMO connector, Model EX611A20 is suitable for vibration measurement in gas turbine applications, such as bearing health monitoring, condition monitoring, and structural damage monitoring. Device uses shear mode sensing elements for minimized sensitivity to thermal transients, and includes both ATEX and IECEx approvals. Other... Read More

Electronic Components & Devices, Sensors Monitors & Transducers

Electronic Vibration Switch is rated for hazardous locations.

May 22, 2013

Model EX686B USB programmable electronic vibration switch is certified by INMETRO for use in hazardous areas such as petroleum refineries, utility gas plants, and oil drilling operations. To provide continuous machinery protection, unit senses vibration and triggers alarm or shuts down machine if vibration exceeds given threshold level. Faults such as imbalance, misalignment, looseness, worn... Read More

Sensors Monitors & Transducers

High-Temperature Accelerometers suit gas turbine applications.

Apr 11, 2013

Along with respective sensitivities of 100 and 10 mV/g, EX600B13 and EX600B14 have frequency range of 282–240,000 cpm (4.7–4,000 Hz) and are suited for vibration measurement in areas of up to 900°F. Single assembly design – 10 ft, hermetically sealed, hard-line cable; side-exit charge mode sensor; and inline charge amplifier – eliminates contamination and common mode noise... Read More

HVAC, Sensors Monitors & Transducers, Test & Measuring Instruments

High Temp Accelerometer operates in wet and acidic environments.

Nov 13, 2012

Designed to tolerate environments up to +325°F, ICP® Model HT602D01 provides sensitivity of (±10%) 100 mV/g with frequency range of (±3 dB) 30–480,000 cpm (0.5–8,000 Hz). Ceramic shear accelerometer include 2-Pin MIL-C-5015 side exit connector and is suitable for vibration measurements in high temperature applications, including paper, plastics, and steel industries. Alternate... Read More

Sensors Monitors & Transducers

Vibration Monitoring System features Modus(TM) interface.

Sep 21, 2012

Utilizing Echo™ Wireless Vibration Sensor and EchoPlus™ Wireless Junction Box to transmit vibration data to central receiver, Echo™ Wireless Vibration Monitoring System monitors overall health of critical machinery and provides immediate notification when warning or critical levels are reached. Both wireless options can be programmed to transmit data at predetermined interval. Accepting... Read More

Sensors Monitors & Transducers

Vibration Monitoring System features wireless operation.

Jul 12, 2012

Comprising Echo® Wireless Vibration Sensors, EchoPlus® Wireless Junction Box, plus receiver and software, Echo® Vibration Monitoring System uses Extended Range Radio Frequency technology and requires no gateways, mesh, or repeaters. System transmits at 0.75 mW Effective Radiated Power in unlicensed 900 MHz band and does not interfere with other wireless communications. Transmitted data... Read More

Sensors Monitors & Transducers

Vibration Monitoring System accepts distributed sensor data.

Jul 03, 2012

Without requiring any gateways, mesh, or repeaters, Echo® Wireless helps users safely monitor health of critical machinery. Extended Range Radio Frequency (ERRF) technology is used to transmit long distances in typical plant environments. Comprised of Echo Wireless Vibration Sensors, EchoPlus Wireless Junction Box, receiver, and software, system transmits at 0.75 mW Effective Radiated Power... Read More

HVAC, Sensors Monitors & Transducers, Test & Measuring Instruments, Transportation Industry Products

High-Temperature Pressure Sensors monitor gas turbines.

Nov 22, 2010

Series 176 high-temperature pressure sensors mount to gas turbine combustor to provide operators with diagnostics, part fatigue analysis, and ability to continuously monitor and control emissions. Able to detect and measure pressure phenomena and combustion instability in temperatures up to 986°F, ATEX and CSA certified units also offer sensitivities to 17 pC/psi and ranges from 20-400 psi.... Read More

Sensors Monitors & Transducers

Universal Transmitter monitors industrial vibration 24/7.

Oct 11, 2010

Designed to protect critical rotating equipment, DIN rail-mounted 682A16 provides loop power for 2-wire, 4-20 mA sensors and ICP® excitation for analog 8-120 mV/g accelerometers. It also works with existing PLC, DCS, and SCADA systems leading to alarm, control, or shutdown. Available with optional detachable front panel LCD and programmer, transmitter also accepts various sensor input signals:... Read More

Sensors Monitors & Transducers

Vibration Transmitter turns accelerometer into monitoring sensor.

May 12, 2010

Installed with any industrial accelerometer, model 682A09 ICP® In-Line Vibration Transmitter converts vibration signal to 4-20 mA velocity output that can be trended with various control room systems. Unit has 2-pin MIL connector input and 3-pin MIL connector output. Operating off of loop-power from PLC, DCS, or SCADA system, it accepts 100 mV/g analog signal, which can be run to central... Read More

Other Company News from
IMI Sensors