ITW Vortec
Cincinnati, OH 45242-4719
Share:
Personal Air Conditioner delivers both warm and cool air.
Coupled with lightweight vest, Dual Action PAC delivers either cool or warm air to wearer's torso and neck. Unit utilizes vortex technology, providing air temperatures ranging from 30–120Ã-
Read More »Quiet, No-Maintenance Enclosure Cooling
Vortec's recently released Vortex A/CTM(TM) cooling system for electrical enclosures has now been approved for both side as well as top mounting on NEMA Type 4 and 4X rated electrical cabinets. The super quiet Vortex A/C is the all-new alternative to expensive air conditioners for below-ambient cooling. Just as quiet as an air conditioner (about 62 dBA), the UL-listed Vortex A/C noise level is...
Read More »Cooling Systems maintain enclosure temperature at 80-90-
Suited for NEMA Type 4 and 4X rated electrical cabinets, UL listed, Vortex A/C(TM) cooling systems are available in 3 models that deliver 900, 1,500, or 2,500 Btu/hr. Units feature noise levels of 62 dBA and operate in environments up to 175Ã-
Read More »Cooling Systems suit NEMA 4X rated electrical cabinets.
Stainless steel Panel Guard(TM) Vortex Cooler(TM) Systems feature integral mechanical thermostat to maintain enclosure temperatures within range of 80-122Ã-
Read More »Cooling Systems suit NEMA 4x enclosures.
Closed-loop Cold PumpÃ-® Cooling Systems are offered in 4 corrosion-resistant models ranging from 1,600-8,500 BTU/hr. Room air is continuously drawn through external filter, across condenser coils, and flows out top external vent. Thermostatically controlled, UL-listed, CE-approved units use CFC-free refrigerants and are suited for cooling electrical control panels and enclosures. Both 115...
Read More »Air Nozzles are fully cleanable.
Adjustable-thrust DuraBlast(TM) Nozzles never need replacing because of clogging. Design forces compressed air through adjustable gap that accelerates airflows, entraining surrounding air as it exits nozzle. OSHA-compliant units come in aluminum and stainless steel, with positionable flex hose or copper tube mountings. Single setscrew allows easy cleaning and micrometer-style adjustment of thrust...
Read More »Cold Air Tubes deliver sub-zero air.
With no moving parts, Cold Air Tubes(TM) convert compressed air into low pressure stream of cold air that reaches temperatures as low as -20Ã-
Read More »Vortex Tubes provide spot cooling.
Using only factory compressed air, Vortex Tubes generate temperatures down to -30Ã-
Read More »Bladeless Blower uses little compressed air.
Round TransvectorsÃ-® use small amount of filtered compressed air to deliver large airflow for conveying, ventilation, drying, cooling, and vacuuming applications. High-flow, bladeless blowers can be used to blowoff or vacuum scrap, dust, and chips from machining; convey pellets or small parts; remove fumes and gases; or work in cooling and drying operations. Used in ducted and unducted...
Read More »Flexible Hose Nozzle assists blowoff, cooling, and drying.
Model #1201F-12 flexible hose, small diameter, low thrust air nozzle delivers 6 oz. of thrust at distances of 12 in. using 9 SCFM of compressed air at 100 PSIG. Its compact 3/8 in. OD hose is fully flexible, but holds its position under full line pressure. Model #1201F-12 is suitable for parts feeders, vibratory bowls, packaging, and printing and finishing equipment. 1/8 in. Nozzle has NPT male...
Read More »Personal Air Conditioner delivers both warm and cool air.
Coupled with lightweight vest, Dual Action PAC delivers either cool or warm air to wearer's torso and neck. Unit utilizes vortex technology, providing air temperatures ranging from 30–120Ã-
Read More »Quiet, No-Maintenance Enclosure Cooling
Vortec's recently released Vortex A/CTM(TM) cooling system for electrical enclosures has now been approved for both side as well as top mounting on NEMA Type 4 and 4X rated electrical cabinets. The super quiet Vortex A/C is the all-new alternative to expensive air conditioners for below-ambient cooling. Just as quiet as an air conditioner (about 62 dBA), the UL-listed Vortex A/C noise level is...
Read More »Cooling Systems maintain enclosure temperature at 80-90-
Suited for NEMA Type 4 and 4X rated electrical cabinets, UL listed, Vortex A/C(TM) cooling systems are available in 3 models that deliver 900, 1,500, or 2,500 Btu/hr. Units feature noise levels of 62 dBA and operate in environments up to 175Ã-
Read More »Cooling Systems suit NEMA 4X rated electrical cabinets.
Stainless steel Panel Guard(TM) Vortex Cooler(TM) Systems feature integral mechanical thermostat to maintain enclosure temperatures within range of 80-122Ã-
Read More »Cooling Systems suit NEMA 4x enclosures.
Closed-loop Cold PumpÃ-® Cooling Systems are offered in 4 corrosion-resistant models ranging from 1,600-8,500 BTU/hr. Room air is continuously drawn through external filter, across condenser coils, and flows out top external vent. Thermostatically controlled, UL-listed, CE-approved units use CFC-free refrigerants and are suited for cooling electrical control panels and enclosures. Both 115...
Read More »Air Nozzles are fully cleanable.
Adjustable-thrust DuraBlast(TM) Nozzles never need replacing because of clogging. Design forces compressed air through adjustable gap that accelerates airflows, entraining surrounding air as it exits nozzle. OSHA-compliant units come in aluminum and stainless steel, with positionable flex hose or copper tube mountings. Single setscrew allows easy cleaning and micrometer-style adjustment of thrust...
Read More »Cold Air Tubes deliver sub-zero air.
With no moving parts, Cold Air Tubes(TM) convert compressed air into low pressure stream of cold air that reaches temperatures as low as -20Ã-
Read More »Vortex Tubes provide spot cooling.
Using only factory compressed air, Vortex Tubes generate temperatures down to -30Ã-
Read More »Bladeless Blower uses little compressed air.
Round TransvectorsÃ-® use small amount of filtered compressed air to deliver large airflow for conveying, ventilation, drying, cooling, and vacuuming applications. High-flow, bladeless blowers can be used to blowoff or vacuum scrap, dust, and chips from machining; convey pellets or small parts; remove fumes and gases; or work in cooling and drying operations. Used in ducted and unducted...
Read More »Flexible Hose Nozzle assists blowoff, cooling, and drying.
Model #1201F-12 flexible hose, small diameter, low thrust air nozzle delivers 6 oz. of thrust at distances of 12 in. using 9 SCFM of compressed air at 100 PSIG. Its compact 3/8 in. OD hose is fully flexible, but holds its position under full line pressure. Model #1201F-12 is suitable for parts feeders, vibratory bowls, packaging, and printing and finishing equipment. 1/8 in. Nozzle has NPT male...
Read More »