Company News

OKW Enclosures, Inc.

3000 Old Pond Rd., Bridgeville, PA, 15017, US

  • 412-220-9244
  • 800-965-9872

General Information:
Sean Bailey
USA
E-mail this person

Share Like Tweet Add Email

Latest New Product News from
OKW Enclosures, Inc.

Electronic Components & Devices

Enclosures for iPAD Air Tablets prevent damage and theft.

December 4, 2014

INTERFACE-TERMINAL multifunction electronic enclosure range includes iPAD Air front panels, available in matt anodized aluminum or UL 94 HB-rated ABS, that enable secure mounting to walls or desks for viewing and operating tablets in communal locations. Designed to fit Type I ABS (UL 94 HB) base section in modular INTERFACE-TERMINAL range, these customizable, tamperproof, IP40-rated housings can incline 20° and also be configured as handheld units. Read More

Plant Furnishings & Accessories, Electrical Equipment & Systems, Mechanical Power Transmission

Customizable Terminal Enclosure is offered in unsealed version.

November 24, 2014

While designed for desktop use, UNIDESK unsealed sloping front terminal enclosures can also be wall mounted. Ergonomic aluminum instrument enclosures, supplied pre-assembled, feature recessed front panel for membrane keypad, pre-punched PCB fixing points in base, and flat rear wall for installing switches, connectors, power inlets, and cable glands. In addition to light gray and black colors, 3 sizes are available: 7.87 x 7.87 x 4.02 in., 11.81 x 7.87 x 4.02 in., and 15.74 x 7.87 x 4.02 in. Read More

Electronic Components & Devices

Configurable Electronics Enclosures are offered as complete sets.

November 10, 2014

Molded in ABS (UL 94 HB), INTERFACE-TERMINAL multifunction, ergonomic enclosures offer space for components, displays, and touchscreens. Modular construction allows 5 formats: mobile; with base or flat wall suspension element; desktop; desktop/wall mounting with latch lock; and flush-mounted in walls or control panels. Along with front panels of ABS, aluminum, and glass, choices include 7.48 x 5.31 in., 8.86 x 6.50 in., and 10.83 x 7.68 in. plan sizes. Read More

Mechanical Components & Assemblies

IP68 Cable Glands aid installation and work in difficult areas.

November 3, 2014

Molded of polyamide, Quick Fix Cable Glands fit from outside without special tools to accelerate installations and facilitate work where access is difficult. External locknut has left-hand thread to ensure firm retention. Rated to IP68 for seal and strain relief, products are compatible with enclosure wall thicknesses from 0.04–0.15 in. Available sizes include M16 (cable Ø 0.20–0.39 in.), M20 (cable Ø 0.31–0.51 in.), M25 (cable Ø 0.43–0.67 in.), and M32 (cable Ø 0.59–1.26 in.). Read More

Electronic Components & Devices

Handheld Enclosures feature integrated charging contacts.

October 20, 2014

Designed for mobile applications in harsh environments, DATEC-COMPACT Outdoor Enclosures include S, M, and L models measuring 5.35 x 2.91 x 1.26 in., 6.77 x 3.62 x 1.53 in., and 8.11 x 4.33 x 1.85 in., respectively. All 3 sizes can be specified with or without gold-plated integrated contacts (<15 A, 1-pole) for charging and data transfer. Versions with battery compartments provide slots for SD cards and USB connectors. Manufactured from UV-stable ASA+PC-FR, enclosures are rated to IP65/NEMA 4. Read More

Material Handling & Storage, Electrical Equipment & Systems, Electronic Components & Devices

DIN Rail Enclosure Linking System hastens installation of boxes.

September 16, 2014

Designed for 7.5 mm high top hat TH35 DIN rail assemblies, RAILTEC-BUS system accelerates and facilitates linking of DIN rail enclosures that share same power and signal connections. Modular system includes PA-molded bus support rail; bus PCB with 5 copper conductors (63 V, 5 A max); PA rail cover; PA PCB/bus connection block with PCB pins and 5 gold-plated connection springs; as well as left- and right-hand end caps. Available bus lengths are 9.84 and 19.68 in. Read More

Plant Furnishings & Accessories, Electronic Components & Devices

Electronic Enclosures combine plastic and aluminum.

September 5, 2014

Available in 36 models, SYNERGY Electronic Enclosures are suitable for handheld, desktop, and wall mounted equipment. Glass reinforced polyamide pillars snap into recessed top panel, locate assembly extrusion, and are fixed to bottom part with 4 stainless steel Torx T10 anti-tamper screws. Top and base sections are manufactured from UV-resistant ASA+PC-FR, while main body section is extruded from AlMgSi 0.5 aluminum, blasted with glass beads, and anodized in silver for optimized surface finish. Read More

Plant Furnishings & Accessories, Electronic Components & Devices

DIN Rail Enclosures feature low-profile design.

August 7, 2014

Designed to fit TH35 x 7.5 mm rails, RAILTEC B DIN Rail Enclosures come in 2, 4, 6, and 9 module sizes. Each enclosure is molded from PPO (UL 94 V-0) for base and PC (UL 94 V-1) for top section. Fully insulated and protected according to VBG4 and IEC 529/DIN VDE 0470-1, enclosures are suitable for machine building and automotive industry. Customization options include CNC milling and drilling, RFI shielding, silk-screen and tampo printing of legends and logos. Read More

Electronic Components & Devices

Handheld Enclosures are designed for outdoor electronics.

July 25, 2014

Available in 6.771 x 3.622 x 1.535 in. size, DATEC-COMPACT enclosures, desk stations, and wall holders are ergonomic, UV-stable, IP65 (NEMA 4)- rated handheld enclosures assembled with tamperproof Torx T10 screws. Products feature integrated contacts as option, providing all-in-one solution for charging and data transfer. Manufactured from ASA+PC-FR blend (UL 94 V-0) for strength and UV stability, enclosures support optional 3 x 1.5 V AA battery compartment and customization. Read More

Plant Furnishings & Accessories

Ruggedized Handheld Enclosures are rated to IP65.

June 10, 2014

Available in versions with open and closed tops, IP65 HAND-TERMINAL industrial enclosures are designed for handheld machine controllers, test instruments, and data entry devices. Even weight distribution and ergonomic handgrip on underside promote user comfort and help minimize fatigue. Molded in impact-resistant, flame-retardant (UL 94 V-0) blend of ABS and PC, 8.66 x 4.72 x 2.55 in. enclosures have recessed top for membrane keypads and can be fully customized.
Read More

Computer Hardware & Peripherals, Plant Furnishings & Accessories, Electronic Components & Devices

Handheld Enclosures feature integrated cable glands.

May 22, 2014

Respectively, SMART-CASE M, L, and XL models are available with integrated cable glands that accommodate cable sizes Ø 0.134–0.165 in., Ø 0.165–0.197 in., and Ø 0.197–0.232 in. These customizable ergonomic housings can be specified for all types of remote control applications, either wireless or with cable connection; are manufactured from ABS or PMMA (for IR applications); and carry IP40 (XS), IP41 (M), and IP65 (L and XL) ratings. Recess is available for mounting membrane keypad. Read More

Plant Furnishings & Accessories

Instrument Enclosures mount on suspension arms.

April 9, 2014

Available in ABS for indoor use and fiberglass reinforced polyamide for outdoor use, CARRYTEC Enclosures come in S, M, and L sizes measuring 8.74 x 8.07 x 3.15 in., 10.62 x 9.72 x 3.58 in., and 13.70 x 11.93 x 4.61 in., respectively. Integrated handle can be used as grab point when inverted and fitted to suspension arm. Recessed area on top section accommodates keypads, displays, and touch screens, while inset flat sections on underside enable mounting of connectors or control switches. Read More

Plant Furnishings & Accessories, Electronic Components & Devices

Wearable Enclosures accommodate handheld electronic devices.

March 25, 2014

Assembled with 2 self-tapping screws, ERGO-CASE XS consists of top and base molded in ABS (UL 94 HB) in Off-white or Black as well as intermediate ring of gray soft-touch TPE elastomer. Enclosures can be specified without eyelets or with one eyelet for lanyard or 2 lateral eyelets for fitting device to wrist strap/belt. With external dimensions as small as 3.23 x 2.20 x 0.94 in., enclosures have ergonomic contour and recessed area in top for mounting membrane keypad or product label. Read More

Plant Furnishings & Accessories, Electronic Components & Devices

Plastic Enclosures suit compact handheld electronics.

March 6, 2014

Molded in off-white or black ABS, ERGO-CASE Enclosures come in XS, S, M, and L sizes with external dimensions from 3.23 x 2.20 x 0.94 in. to 5.91 x 7.87 x 2.72 in. Units consist of top, base, and intermediate ring that are assembled with two self-tapping screws. XS and S models are designed for wearing on straps or lanyards, while M and L models can be fitted to arm and belt straps or wall mounted. Applications include medical/wellness equipment, security devices, and dosage detectors. Read More

Electronic Components & Devices

DIN Rail Enclosures come in 6 sizes to accommodate 2-12 modules.

February 10, 2014

Available in sizes that accommodate 2, 3, 4, 6, 9, or 12 modules, RAILTEC-B enclosures suit applications from machine-building and automation to electrical control equipment. Versions are available for 5.0/5.08 mm pitch terminal blocks, with 10–64 and 5–32 max terminals per case; for plug headers; as closed case; and with knockout perforations for terminal blocks or 2 plug headers. While base is polyphenylene oxide, top is polycarbonate. Accessories and customization options are available.
Read More

Plant Furnishings & Accessories, Electrical Equipment & Systems, Electronic Components & Devices

Wall Mount Enclosures target control and data applications.

January 9, 2014

Available in 3 standard sizes ranging from 5.51 x 5.51 x 1.83 in. to 8.66 x 8.66 x 1.99 in., NET-BOX Enclosures feature inset cable connection panel, hiding unsightly connectors under removable front lid. Flat design accommodates range of electronic assemblies, displays, and large-volume connectors. Curved top section can be fitted with LEDs, displays, and switches. With UL 94 V-0 rating and ASA+PC material used, enclosures are suitable for outdoor applications. Read More

Plant Furnishings & Accessories, Mechanical Power Transmission, Electronic Components & Devices

Manufacturing Service produces custom metal enclosures.

November 8, 2013

By using standard extrusion profiles and die castings and manufacturing special fabricated sheet metal parts, Custom Enclosures Service helps design engineers develop unique, requirement-matched housings. Available enclosures types include desktop, portable, wall mount, and 19 in. rack mount varieties. Additional options range from component mounting parameters and external dimensions to holes and cut outs, internal chassis and mounting plates, and finishes/coatings. Read More

Material Handling & Storage, Packaging Equipment, Fasteners & Hardware

Carrying Accessories are available for portable enclosures.

October 11, 2013

Accessories for CARRYTEC portable enclosures include 2 soft storage and protection bags, left and right handed, for carrying equipment cables, test probes, sensors, and tools. Bags clip on to side of enclosures, and opening next to underside control panels on enclosures allows cables to be connected to equipment and stored in bags for use when needed. Other accessories include shoulder strap, IP54 sealing kit, battery compartments for five 1.5 V AA cells, and medical holding clamp. Read More

Mechanical Components & Assemblies

Aluminum 19 in. Instrument Enclosures accept 3U equipment.

September 23, 2013

Available in 3U x 10.5 in. x 13.77 in., 3U x 19 in. x 13.77 in., and 3U x 19 in. x 17.71 in. sizes, INSTRUMET enclosures conform to DIN 41494 and IEC 297-1 standards for 19 in. equipment and accept standard 3U subracks and chassis. Two versions are available with ABS side handles for desktop use or tough diecast bail arm for portable applications. Base and rear panels have ventilation slots, and internal support rails on all models facilitate installation of heavy subracks or chassis. Read More

Plant Furnishings & Accessories

Plastic Enclosures feature flush mounting frames.

September 6, 2013

Designed for basic interface-terminal enclosures, Accessory Kits include 4 holding brackets which are fitted to rear of enclosure and are used to mount assembly in wall or control panel aperture. Flush fitting design frame snaps onto holding brackets to hide aperture and assembly screws for professional appearance. Consisting of flat or high bottom part fitted with front panel/cover option, enclosures come in 5.31 x 7.48, 6.49 x 8.85, and 7.67 x 10.82 in. sizes with heights from 1.04–1.83 in. Read More

Other Company News from
OKW Enclosures, Inc.