Detcon, Inc
The Woodlands, TX 77381
Share:
Detcon's Model X40 Controller Receives TUV Certification
The Woodlands, TX — Detcon, an IST company, is pleased to announce that the Model X40 NEMA 4X alarm and control system has received cTUVus NRTL certification for non-hazardous locations. The rugged, power-efficient controller, designed to monitor gas detection sensors and a wide range of other field devices, can receive and supervise 4-20mA or RS-485 field device inputs. The controller can be...
Read More »Detcon Model Series 700 Gas Detection Sensors Receive ATEX Certification & SIL2 Qualification
The Woodlands, Texas - October 11, 2006 Detcon is pleased to announce that the Model 700 series gas detection sensors have received ATEX certification and qualify as SIL2 devices. The combustible gas and solid-state H2S sensor models are ATEX certified for use in Class I, Zone 1, Group IIB+H2. The ATEX certification for electrochemical toxic gas sensor models covers use in Class I, Zone 1, Group...
Read More »
Gas Detector monitors 40+ gases, including H2S.
UniTox(TM) has sensors that employ universal transmitters, which are compatible with sensor modules for monitoring various gases. Loop-powered universal transmitter, combined with sensor modules specific to different toxic gases, allows for field conversion to any gas type or range required. UniTox(TM) includes intrinsically safe electronics with on-board microprocessor. Capabilities include...
Read More »
Alarm System checks for toxic gases.
UniGuard(TM) toxic gas alarm system combines Model 600 Series MicroSafe(TM) toxic gas sensor with internal power supply, alarm strobe, and horn. Sensor outputs include 4-20 mA, RS-485 Modbus(TM), 2 alarm relays, and one fault relay. Alarm relays are pre-wired to strobe and horn. It has backlit LCD and LED indicators for alarms, fault, and cal status. Menu driven calibration takes less than 3 min....
Read More »
Pipeline Analyzer measures both H2S and CO2.
Series 1000 provides continuous, real-time measurement of gas concentrations. Ranges are from 0 to 20 PPM up to 0 to 10,000 PPM (1%) for H2S, and from 0 to 3000 PPM up to 0 to 100% for CO2. Analyzer utilizes MOS sensor element for H2S, and field replaceable, plug-in, infrared sensor for CO2. It includes microprocessor-based, signal-conditioning transmitters with local digital display, fault...
Read More »
Detcon's Model X40 Controller Receives TUV Certification
The Woodlands, TX — Detcon, an IST company, is pleased to announce that the Model X40 NEMA 4X alarm and control system has received cTUVus NRTL certification for non-hazardous locations. The rugged, power-efficient controller, designed to monitor gas detection sensors and a wide range of other field devices, can receive and supervise 4-20mA or RS-485 field device inputs. The controller can be...
Read More »Detcon Model Series 700 Gas Detection Sensors Receive ATEX Certification & SIL2 Qualification
The Woodlands, Texas - October 11, 2006 Detcon is pleased to announce that the Model 700 series gas detection sensors have received ATEX certification and qualify as SIL2 devices. The combustible gas and solid-state H2S sensor models are ATEX certified for use in Class I, Zone 1, Group IIB+H2. The ATEX certification for electrochemical toxic gas sensor models covers use in Class I, Zone 1, Group...
Read More »
Gas Detector monitors 40+ gases, including H2S.
UniTox(TM) has sensors that employ universal transmitters, which are compatible with sensor modules for monitoring various gases. Loop-powered universal transmitter, combined with sensor modules specific to different toxic gases, allows for field conversion to any gas type or range required. UniTox(TM) includes intrinsically safe electronics with on-board microprocessor. Capabilities include...
Read More »
Alarm System checks for toxic gases.
UniGuard(TM) toxic gas alarm system combines Model 600 Series MicroSafe(TM) toxic gas sensor with internal power supply, alarm strobe, and horn. Sensor outputs include 4-20 mA, RS-485 Modbus(TM), 2 alarm relays, and one fault relay. Alarm relays are pre-wired to strobe and horn. It has backlit LCD and LED indicators for alarms, fault, and cal status. Menu driven calibration takes less than 3 min....
Read More »
Pipeline Analyzer measures both H2S and CO2.
Series 1000 provides continuous, real-time measurement of gas concentrations. Ranges are from 0 to 20 PPM up to 0 to 10,000 PPM (1%) for H2S, and from 0 to 3000 PPM up to 0 to 100% for CO2. Analyzer utilizes MOS sensor element for H2S, and field replaceable, plug-in, infrared sensor for CO2. It includes microprocessor-based, signal-conditioning transmitters with local digital display, fault...
Read More »