Company News

Endress+Hauser

2350 Endress Place, Greenwood, IN, 46143, US

Marketing:
Crystal Abrell
Market Content Development Manager
USA
Phone: 317-535-7138
Fax: 317-535-2171
E-mail this person

Share Like Tweet Add Email

Latest New Product News from
Endress+Hauser

Material Handling & Storage, Test & Measuring Instruments

Metering Skids are light hydrocarbon custody transfer certified.

May 27, 2015

Respectively featuring 3, 4, and 6 in. lines for 3,300, 5,500, and 13,670 lb/min max loading rates, Models LMS080 (truck loading), LMS100 (railcar loading), and LMS150 (ship loading) come completely assembled for horizontal or vertical installation. Standard components include Promass Coriolis mass flow meter, batch controller, grounding system, temperature sensor, digital start-stop valve, Y-strainer, isolation valves, frame, piping, Ex d junction box, and other associated components. Read More

Electrical Equipment & Systems, Sensors, Monitors & Transducers

Liquid Level Switches utilize tuning fork technology.

May 20, 2015

Featuring 316L stainless steel housing, Liquiphant FTL31 works in process temperatures up to 302°F and pressures to 580 psi. Unit is suitable for tanks, vessels, and pipes used in chemical and oil/gas industries. Liquiphant FTL33, featuring stainless steel enclosure with optional IP69K protection, meets food industry requirements with 3-A and EHEDG certificates. Based on vibrating tuning fork technology, both switches are unaffected by foam formation, changing conductivity, or density. Read More

Test & Measuring Instruments, Controls & Controllers, Sensors, Monitors & Transducers

Turbidity Sensor performs laboratory-quality measurements.

April 9, 2015

Suitable for process water filtration and other industrial process turbidity conditions, Turbimax CUS52D measures turbidity from 0.000–4000 NTU with accuracy of 2% of measurement ±0.01 NTU at process temperatures from -4 to 185°F with detection limit of 0.0015 NTU. Sensor uses 90° light scattering principle in accordance with ISO 7027 standard. Available in immersion, flow cell, and inline versions, Turbimax CUS52D has hygienic design and operates at pressures up to 145 psi. Read More

Electrical Equipment & Systems, Sensors, Monitors & Transducers, Optics & Photonics

Toroidal Conductivity Transmitter serves hygienic applications.

December 29, 2014

Supplied in seamless, gap-free, NEMA 6P/IP69K stainless steel or plastic housing that withstands CIP operations, Smartec CLD18 food-safe PEEK toroidal sensor features potted electronics and FDA-listed wetted materials and uses inductive technique to measure conductivity from 200 µS/cm to 1,000 mS/cm. Transmitter also has platinum RTD Pt 1000 temperature sensor, embedded in PEEK body, and both outputs are via 0–20 or 4–20 mA signal. Binary input allows range switching. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

DP Level Transmitter does not use impulse lines, capillary tubes.

June 4, 2014

Using Ceraphire ceramic sensor in pressure sensor modules, Deltabar FMD71 calculates differential pressure (DP) from 2 pressure sensor modules, each connected electronically to single transmitter, and transmits level, volume, or mass via 4–20 mA with HART as standard 2-wire, loop-powered device. Electronic system eliminates issues associated with impulse lines or capillaries, such as icing, clogging, leaks, condensation, and changing ambient temperatures. Read More

Test & Measuring Instruments, Controls & Controllers, Sensors, Monitors & Transducers

Universal Data Manager provides up to 12 inputs.

May 28, 2014

With Ecograph T RSG35, users can record, visualize, and monitor all analog and/or digital input signals. Integrated web server enables access to current and historical process data via standard web browser. Ethernet and USB capable, unit offers optional Modbus TCP/RTU slave, 128 MB internal memory, and E-mail notification with limit value infringements and alarms. Typical applications include tank/level monitoring, power station supervision, and water/waste quality supervision. Read More

Sensors, Monitors & Transducers

Radar Level Transmitters provide ±0.078 in. accuracy.

March 17, 2014

With built-in 32-point strapping table, Micropilot FMR5X Series can measure level or volume of liquids and bulk solids products in metal or plastic tanks, stilling wells, or other vessels up to 131 ft high with standard units or 197 ft with enhanced dynamics option. Free space level transmitters have software with multi-echo tracking algorithms and functions to suppress interference echoes. Units can be loop powered by 4-20 mA in 2-wire arrangement, and are available in 4-wire configuration. Read More

Test & Measuring Instruments

Multichannel Transmitter offers EtherNet/IP(TM) connectivity.

November 22, 2013

Integrating with Rockwell Automation’s PlantPAx™ Process Automation System, Liquiline CM44 is suited for process monitoring in water/wastewater, chemical, and power industries. Integrated web server allows users to remotely view diagnostic data, perform configuration, or access device parameters via web browser. Available in 1–8 channel versions, 4-wire transmitter supports Memosens® digital sensors, including nitrate, SAC, pH, ORP, conductivity, dissolved oxygen, turbidity, and free-chlorine. Read More

Test & Measuring Instruments

Electromagnetic Flowmeter has intrinsically-safe design.

July 23, 2013

Able to be used in hazardous areas, Proline Promag 200 two-wire magmeter operates in process temperatures from -40 to +304°F and produces 2-wire, 4–20 mA signal with HART or pulse/frequency/switch output. Installation does not require separate power source, and connection types include welded, threaded, hygienic, and flanged. Respectively, Promag H200 and P200 come in 1/12–1 in. and ½–8 in. line sizes for measuring conductive fluid flow with accuracy of ±0.5% of range. Read More

Electrical Equipment & Systems, Sensors, Monitors & Transducers

Liquid Level Switch meets hygienic requirements.

July 1, 2013

Designed to meet FDA requirements as well as 3A Sanitary Standard Number 74, Liquipoint FTW33 can be used in storage, mixing, and process vessels with or without agitator. Conductivity sensor measures presence of liquids with electrical conductivity greater than 1 µS/cm and provides DC-PNP 3 V switching output. Constructed of 316L SS with PEEK insulation, switch withstands process pressures up to 362.5 psi and temperatures up to 212°F, as well as sterilization processes up to 302°F for 60 min. Read More

Sensors, Monitors & Transducers

Real-Time Cell Density Sensor leverages NIR optical absorption.

April 9, 2013

Supplied in 316L stainless steel body with sapphire windows, hygienic and non-intrusive OUSBT66 is designed for in-situ cell production optimization in life science processes, fermentation biomass measurement, and algae growth monitoring for biofuel production. Measuring head, which contains LED light source and optical sensor, is hermetically sealed. Light is filtered to 880 nm on detector side of sensor, allowing direct correlation of cell density in process by receiving sensor. Read More

Controls & Controllers, Electrical Equipment & Systems

Point Level Switches support safety applications up to SIL3.

December 4, 2012

Liquiphant FailSafe FTL8x series offers 2 relay outputs, 4–20 mA output that connects to failsafe switching unit with 2-channel output, safety contacts, and safety locking function. Built-in diagnostics monitor tuning fork-type sensor for damage, corrosion, material buildup, and mechanical blocking, and switches support min and max level detection in liquids from -76 to +536°F, at pressures up to 1,450 psi, viscosity up to 10,000 mPa-s, and densities from 0.4–2.0 g/cm³. Read More

Sensors, Monitors & Transducers

Ultrasonic Sensor measures liquid-solid interfaces in tanks.

November 26, 2012

Turbimax CUS71D ultrasonic interface sensor suits water, wastewater, and chemical processes where suspensions are separated into liquid and solid components by sedimentation. Used with Liquiline M CM44x transmitters, product can detect interface level at distances of 1-32 ft with maximum error of 1.3 in. Immersion sensor operates in process temperatures from 34-122ºF and pressures up to 87 psi. It installs in open basins, channels, and tanks with stainless steel or PVC mounting hardware. Read More

Test & Measuring Instruments

Coriolis Flowmeter features corrosion-resistant design.

October 22, 2012

Immune to external disturbances, Proline Promass 83O/84O simultaneously measure mass flow, fluid density, and temperature and remain stable despite changing process conditions. All materials that can come in contact with gasses and fluids are manufactured from super duplex stainless steel with 25% Cr, and external design is of T316L stainless steel. Resistant to corrosion, products handle pressures to 3,742 psi and process temperatures from -40 to +392°F. Read More

Sensors, Monitors & Transducers

Optical Absorption Sensor serves liquid measurement applications.

October 8, 2012

Measuring optical absorbance by process fluid, OUSAF11 is suited for loss and interface detection, measuring suspended solids and turbidity, as well as detecting phase separations and product loss. Sensor emits light visible and NIR regions, and absorption by process fluid is determined using optical sensor mounted in sensor head. Sensor is available in immersion model for open tanks and basins or insertion model with Tri-Clamp or Varivent connections that meet 3A Sanitary Standards. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Electromagnetic Flowmeter offers cellphone access.

September 24, 2012

Featuring GSM/GPRS cellphone wireless capability for data communications and configuration, battery-powered Promag L800 is suited for flow measurement in remote water and wastewater systems. Once configured, operator at central control room can receive alarms, query totalizer readings, and change flowmeter configuration. Available in sizes from 2–24 in., Promag L800 operates at pressures to 232 psi with maximum flow rate of 33 ft/sec and accuracy of 0.5% of reading. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Differential Pressure Transmitter eliminates capillary tubes.

September 5, 2012

Using 2 pressure sensor modules connected electronically to single transmitter, Deltabar FMD72 eliminates impulse lines or capillaries and related issues such as leaks, condensation, icing, and plugging. One sensor measures hydrostatic pressure, while second sensor measures head pressure, and transmitter calculates differential pressure. Operating in process temperatures from -40 to 257ºF, sensors offer 0.075% accuracy over measuring range of -15 to 150 psi. Accuracy of entire system is 0.1%. Read More

Test & Measuring Instruments

Coriolis Mass Flow Transmitter supports industry customization.

August 22, 2012

Immune to process and environmental influences, Proline Promass 100 measures mass flow, volume flow, density, viscosity, concentration, and temperature with accuracy up to ±0.05%. Product can be combined with industry-specific sensors, materials, and finishes for use in food, beverage, life sciences, pharmaceutical, chemical, and other industries. All measurements are fully traceable, and seamless system integration is possible via EtherNet/IP and Modbus RS-485 digital communication. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Electromagnetic Flowmeter serves water, wastewater applications.

August 15, 2012

With its drinking water approvals and corrosion protection, Proline Promag L 400 can be installed underwater, underground, and in saline environments. Sensors are available in nominal diameters from 2-90 in., and Ethernet port and built-in webserver facilitate data access and configuration via any Web browser. Along with accuracy of 0.2% of range, flowmeter has on-board HistoROM(TM) system that stores all sensor, transmitter, and totalizer data; no data is lost if power is removed. Read More

Test & Measuring Instruments

Hygienic Pressure Transmitters work with gas, steam, liquids.

July 30, 2012

Available with ceramic or metal process isolating diaphragm seals, Cerabar M PMC51 and PMP51 are suitable for absolute and gauge pressure measurements in gases, steams, or liquids as well as level, volume, and mass measurements in liquids. Standard accuracy is 0.15% (0.075% optional), and long term stability is 0.1% of upper range limit (URL)/year and 0.25% of URL/5 years. Able to work in temperatures to 752°F or pressures to 6,000 psi, programmable sensors offer multiple output options. Read More

Other Company News from
Endress+Hauser