Company News


2350 Endress Place, Greenwood, IN, 46143, USA

  • 888-ENDRESS

General Information:
Crystal Hunt
Phone: 317-535-1306
E-mail this person

Latest New Product News from

communication systems & equipment, sensors, monitors & transducers, test & measuring instruments

Accurate 79 GHz Radar increases liquid level measurement accuracy.

March 16, 2016

With 79 GHz transmission frequency, Micropilot NMR81 produces sharply focused microwave beam angle of 3° or 4° that ensures safe and reliable measurements without any interfering signals even in narrow tanks with baffles and down to bottom of tall tanks. Measuring ranges reach up to 70 m, and instrument measures up to 30 m with accuracy to ±0.5 mm in custody transfer applications. Product is also equipped with gas-tight feed-through and fulfills all API and OIML requirements.<br /> Read More

electrical equipment & systems, sensors, monitors & transducers

Capacitive Point Level Switch senses water-based liquids.

March 2, 2016

Intended for food and beverage industry, Liquipoint FTW23 meets FDA requirements and is 3-A and EHEDG certified. All areas in contact with process are made of 316L stainless steel with PEEK insulation, enabling cleaning and sterilization in place. Operating within process pressure range of -14.5 to 232 psi and temperature range of -4 to 212°F, FTW23 is designed for hygienic processes such as water, beer, and fruit juices, and for use in storage tanks, mixing vessels, and pipes. Read More

mounting & attaching products, sensors, monitors & transducers

Retractable Sensor Assemblies eliminate process interruption.

February 4, 2016

With Cleanfit CPA875 and CPA871 sensor assemblies, pH, ORP, oxygen, and NIR sensors can be installed or removed during operation. By moving sensor from measuring position to service position, retractable assemblies allow sensor to be cleaned, calibrated, or replaced without interrupting process. Cleanfit CPA875 is intended for use in food, pharmaceutical, life sciences, and specialty chemical applications, while CPA871 is suited for water/wastewater and general chemical industries. Read More

chemical processing & waste management, test & measuring instruments, waste handling equipment

Phosphorous Analyzer monitors water treatment processes.

November 2, 2015

Configurable with 1 or 2 channels, Liquiline System CA80PH is designed for measurement of orthophosphate, making it suited for all critical measurement and control points of water/wastewater treatment. Colorimetric analyzer is available in 4 measuring ranges: 2 use standard molybdenum for low range measurement down to 50 µg/L and 2 use molybdate vanadate method for high range measurements up to 50 mg/L. Typical sample analysis takes 8&ndash;11 minutes, depending on method used. Read More

test & measuring instruments, green & clean

Ammonia Analyzer targets water resource recovery facilities.

October 6, 2015

By monitoring critical control points in water and resource reclamation facilities, Liquiline CA80AM helps facilities meet EPA rules. Colorimetric analyzer uses standard indophenol blue method, which is compliant to ISO 7150-1, DIN 38406-5, and GB 7481-87 standards. Using onboard logbooks for data storage and retrieval, analyzer allows continuous documentation for reporting to regulatory agencies. EtherNet/IP, Modbus, Ethernet, and integrated web server allow integration into any control system. Read More

material handling & storage, test & measuring instruments

Metering Skids are light hydrocarbon custody transfer certified.

May 27, 2015

Respectively featuring 3, 4, and 6 in. lines for 3,300, 5,500, and 13,670 lb/min max loading rates, Models LMS080 (truck loading), LMS100 (railcar loading), and LMS150 (ship loading) come completely assembled for horizontal or vertical installation. Standard components include Promass Coriolis mass flow meter, batch controller, grounding system, temperature sensor, digital start-stop valve, Y-strainer, isolation valves, frame, piping, Ex d junction box, and other associated components. Read More

electrical equipment & systems, sensors, monitors & transducers

Liquid Level Switches utilize tuning fork technology.

May 20, 2015

Featuring 316L stainless steel housing, Liquiphant FTL31 works in process temperatures up to 302°F and pressures to 580 psi. Unit is suitable for tanks, vessels, and pipes used in chemical and oil/gas industries. Liquiphant FTL33, featuring stainless steel enclosure with optional IP69K protection, meets food industry requirements with 3-A and EHEDG certificates. Based on vibrating tuning fork technology, both switches are unaffected by foam formation, changing conductivity, or density. Read More

controls & controllers, sensors, monitors & transducers, test & measuring instruments

Turbidity Sensor performs laboratory-quality measurements.

April 9, 2015

Suitable for process water filtration and other industrial process turbidity conditions, Turbimax CUS52D measures turbidity from 0.000&ndash;4000 NTU with accuracy of 2% of measurement ±0.01 NTU at process temperatures from -4 to 185°F with detection limit of 0.0015 NTU. Sensor uses 90° light scattering principle in accordance with ISO 7027 standard. Available in immersion, flow cell, and inline versions, Turbimax CUS52D has hygienic design and operates at pressures up to 145 psi. Read More

electrical equipment & systems, optics & photonics, sensors, monitors & transducers

Toroidal Conductivity Transmitter serves hygienic applications.

December 29, 2014

Supplied in seamless, gap-free, NEMA 6P/IP69K stainless steel or plastic housing that withstands CIP operations, Smartec CLD18 food-safe PEEK toroidal sensor features potted electronics and FDA-listed wetted materials and uses inductive technique to measure conductivity from 200 µS/cm to 1,000 mS/cm. Transmitter also has platinum RTD Pt 1000 temperature sensor, embedded in PEEK body, and both outputs are via 0&ndash;20 or 4&ndash;20 mA signal. Binary input allows range switching. Read More

sensors, monitors & transducers, test & measuring instruments

DP Level Transmitter does not use impulse lines, capillary tubes.

June 4, 2014

Using Ceraphire ceramic sensor in pressure sensor modules, Deltabar FMD71 calculates differential pressure (DP) from 2 pressure sensor modules, each connected electronically to single transmitter, and transmits level, volume, or mass via 4&ndash;20 mA with HART as standard 2-wire, loop-powered device. Electronic system eliminates issues associated with impulse lines or capillaries, such as icing, clogging, leaks, condensation, and changing ambient temperatures. Read More

controls & controllers, sensors, monitors & transducers, test & measuring instruments

Universal Data Manager provides up to 12 inputs.

May 28, 2014

With Ecograph T RSG35, users can record, visualize, and monitor all analog and/or digital input signals. Integrated web server enables access to current and historical process data via standard web browser. Ethernet and USB capable, unit offers optional Modbus TCP/RTU slave, 128 MB internal memory, and E-mail notification with limit value infringements and alarms. Typical applications include tank/level monitoring, power station supervision, and water/waste quality supervision. Read More

sensors, monitors & transducers

Radar Level Transmitters provide ±0.078 in. accuracy.

March 17, 2014

With built-in 32-point strapping table, Micropilot FMR5X Series can measure level or volume of liquids and bulk solids products in metal or plastic tanks, stilling wells, or other vessels up to 131 ft high with standard units or 197 ft with enhanced dynamics option. Free space level transmitters have software with multi-echo tracking algorithms and functions to suppress interference echoes. Units can be loop powered by 4-20 mA in 2-wire arrangement, and are available in 4-wire configuration. Read More

test & measuring instruments

Multichannel Transmitter offers EtherNet/IP(TM) connectivity.

November 22, 2013

Integrating with Rockwell Automation&rsquo;s PlantPAx&trade; Process Automation System, Liquiline CM44 is suited for process monitoring in water/wastewater, chemical, and power industries. Integrated web server allows users to remotely view diagnostic data, perform configuration, or access device parameters via web browser. Available in 1&ndash;8 channel versions, 4-wire transmitter supports Memosens® digital sensors, including nitrate, SAC, pH, ORP, conductivity, dissolved oxygen, turbidity, and free-chlorine. Read More

test & measuring instruments

Electromagnetic Flowmeter has intrinsically-safe design.

July 23, 2013

Able to be used in hazardous areas, Proline Promag 200 two-wire magmeter operates in process temperatures from -40 to +304°F and produces 2-wire, 4&ndash;20 mA signal with HART or pulse/frequency/switch output. Installation does not require separate power source, and connection types include welded, threaded, hygienic, and flanged. Respectively, Promag H200 and P200 come in 1/12&ndash;1 in. and ½&ndash;8 in. line sizes for measuring conductive fluid flow with accuracy of ±0.5% of range. Read More

electrical equipment & systems, sensors, monitors & transducers

Liquid Level Switch meets hygienic requirements.

July 1, 2013

Designed to meet FDA requirements as well as 3A Sanitary Standard Number 74, Liquipoint FTW33 can be used in storage, mixing, and process vessels with or without agitator. Conductivity sensor measures presence of liquids with electrical conductivity greater than 1 µS/cm and provides DC-PNP 3 V switching output. Constructed of 316L SS with PEEK insulation, switch withstands process pressures up to 362.5 psi and temperatures up to 212°F, as well as sterilization processes up to 302°F for 60 min. Read More

sensors, monitors & transducers

Real-Time Cell Density Sensor leverages NIR optical absorption.

April 9, 2013

Supplied in 316L stainless steel body with sapphire windows, hygienic and non-intrusive OUSBT66 is designed for in-situ cell production optimization in life science processes, fermentation biomass measurement, and algae growth monitoring for biofuel production. Measuring head, which contains LED light source and optical sensor, is hermetically sealed. Light is filtered to 880 nm on detector side of sensor, allowing direct correlation of cell density in process by receiving sensor. Read More

controls & controllers, electrical equipment & systems

Point Level Switches support safety applications up to SIL3.

December 4, 2012

Liquiphant FailSafe FTL8x series offers 2 relay outputs, 4&ndash;20 mA output that connects to failsafe switching unit with 2-channel output, safety contacts, and safety locking function. Built-in diagnostics monitor tuning fork-type sensor for damage, corrosion, material buildup, and mechanical blocking, and switches support min and max level detection in liquids from -76 to +536°F, at pressures up to 1,450 psi, viscosity up to 10,000 mPa-s, and densities from 0.4&ndash;2.0 g/cm³. Read More

sensors, monitors & transducers

Ultrasonic Sensor measures liquid-solid interfaces in tanks.

November 26, 2012

Turbimax CUS71D ultrasonic interface sensor suits water, wastewater, and chemical processes where suspensions are separated into liquid and solid components by sedimentation. Used with Liquiline M CM44x transmitters, product can detect interface level at distances of 1-32 ft with maximum error of 1.3 in. Immersion sensor operates in process temperatures from 34-122ºF and pressures up to 87 psi. It installs in open basins, channels, and tanks with stainless steel or PVC mounting hardware. Read More

test & measuring instruments

Coriolis Flowmeter features corrosion-resistant design.

October 22, 2012

Immune to external disturbances, Proline Promass 83O/84O simultaneously measure mass flow, fluid density, and temperature and remain stable despite changing process conditions. All materials that can come in contact with gasses and fluids are manufactured from super duplex stainless steel with 25% Cr, and external design is of T316L stainless steel. Resistant to corrosion, products handle pressures to 3,742 psi and process temperatures from -40 to +392°F. Read More

sensors, monitors & transducers

Optical Absorption Sensor serves liquid measurement applications.

October 8, 2012

Measuring optical absorbance by process fluid, OUSAF11 is suited for loss and interface detection, measuring suspended solids and turbidity, as well as detecting phase separations and product loss. Sensor emits light visible and NIR regions, and absorption by process fluid is determined using optical sensor mounted in sensor head. Sensor is available in immersion model for open tanks and basins or insertion model with Tri-Clamp or Varivent connections that meet 3A Sanitary Standards. Read More

Other Company News from