Company News

Lubrication Engineers, Inc.

300 Bailey Ave., Fort Worth, TX, 76107, USA

  • 800-537-7683

General Information:
Paul Grimes
Phone: 316-529-6807
E-mail this person

Latest New Product News from
Lubrication Engineers, Inc.

food processing & preparation, lubricants

Synthetic Grease protects food processing equipment.

October 8, 2015

NSF H1-registered for incidental food contact, H1 Quincal&trade; Syn FG Grease (4070-4072) comes in NLGI grades 0, 1, and 2 and is certified Kosher Pareve. Synthetic base fluid consists of calcium sulfonate complex thickener, which provides rust/corrosion prevention capabilities, and Quinplex impact-resistant additive. Formula promotes dropping point, pressure characteristics, and mechanical stability. Areas of use include blenders, cookers, filling/canning machines, and packaging equipment.<br /> Read More

lubricants, materials & material processing, green & clean

Diesel Fuel Supplement helps maximize power.

September 22, 2015

Available in winter and summer versions, Full Torque&trade; Diesel Fuel Improver helps long haul diesel engine operators conserve fuel, protect equipment, and keep trucks on road despite harsh conditions. Cetane-boosted, detergent-containing formulation increases fuel&rsquo;s cetane number up to 3 numbers, resulting in accelerated ignition time, more power, and minimized smoke at startup. Winter version is especially useful in extreme cold weather, aiding in prevention of fuel gelling and ice formation. Read More

lubricants, green & clean

Wire Rope Grease suits applications near waterways.

August 19, 2015

Certified as Environmentally Acceptable Lubricant, Earthwise&trade; EAL Wire Rope Grease coats wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Semi-tacky, water-resistant characteristics enable lubricant to seal out damaging moisture, protect against rust formation, and shield against acid attack. Designed to meet specifications required by EPA&rsquo;s Vessel General Permit, semi-fluid coating is biodegradable and exhibits minimal aquatic toxicity. Read More

lubricants, machinery & machining tools

General-Purpose Grease withstands severe conditions.

February 24, 2014

Combining high-viscosity base fluid, calcium sulfonate complex thickener, and Monolec® wear-reducing additive, Monocal&trade; GP Grease protects equipment from heat, moisture, and heavy loads. Formula imparts high dropping point, inherent extreme pressure characteristics, mechanical stability, low oil bleed, and water resistance. Calcium sulfonate thickener prevents rust and corrosion, while Monolec protects against metal-to-metal contact, resists oxidation, and helps grease maintain consistency. Read More


Synthetic Oven Chain Lubricant fights heat and moisture.

January 31, 2014

In addition to meeting NSF criteria for incidental food contact, Ovenworx&trade; H1 Syn Chain Lubricant (4061) is low-staining, odor-neutral, and contains no artificial dyes. Fully synthetic formula features high-viscosity base fluid that penetrates all moving parts of oven chain, enabling them to move freely. Capable of lubricating chains up to 572°F without solid additives, product seals out damaging moisture, preventing corrosion that can lead to premature failure of chain pins and bushings. Read More

cleaning products & equipment, green & clean

Concentrated Industrial Cleaner removes oil and grease.

October 11, 2013

Containing 9 blended active cleaning ingredients, Greentastic&trade; Industrial Cleaner is suitable for cleaning concrete surfaces, degreasing parts, washing trucks and tractors, and cleaning food manufacturing equipment. Concentrated liquid solution is also gentle enough to be used as general purpose cleaner. Safe for environment, water-based product is phosphate- and phosphorous-free, non-caustic, non-acidic, non-flammable, and contains no abrasives. Read More

lubricants, materials & material processing

Synthetic Diesel Engine Oil offers all-weather performance.

October 18, 2012

With synthetic base oil and exclusive additive package, Monolec Ultra® Syn Heavy Duty Engine Oil lubricates diesel engines, even in low-temperature conditions, without shear stability and viscosity problems. Monolec® wear-reducing additive creates single molecular lubricating film on metal surfaces, maximizing oil film strength without affecting clearances. SAE 5W-40 formulation offers wear protection, achieves flow quickly during cold startups, and maintains viscosity at operating temperatures.  Read More


Industrial Grease withstands exposure to water.

October 4, 2012

Containing Almasol® solid additive, 5% molybdenum disulfide, and calcium sulfonate thickener, Almamoly&trade; HD Grease provides wear-resistant lubrication, staying in place even when it is squeezed out of contact zone due to extreme pressure or heavy shock loading. Calcium sulfonate inherently prevents rust and corrosion, while exhibiting optimal mechanical stability and extreme pressure properties. Applications include articulated trucks, backhoes, bulldozers, conveyors, excavators, and loaders. Read More


Synthetic Motor Oil exceeds API performance standards.

March 16, 2012

Available in SAE 5W-20 and 5W-30 grades, Monolec® Tetra-Syn(TM) Engine Oil incorporates Monolec® wear-reducing additive to protect against rust, corrosion, and oxidation and to prevent formation of ash and other deposits. Product also provides protection from high temperatures found in engines with turbochargers and superchargers. Typical applications include personal passenger cars, vans, and light trucks. Read More


Lubrication Training Program addresses machine health.

March 1, 2011

Level I Machinery Lubrication Technician training classes will be offered June 7-9 and Oct. 18-20 from 1,200 ft² facility in Wichita, KS. Upon completion, participants will be eligible to take optional ICML exam to become licensed machinery lubrication technician. Proximity to plant enables incorporation of real-world applications and demonstrations, while variety of topics advance trainee knowledge of lubrication reliability practices. Read More


Polyurea Grease prolongs electric motor life.

November 10, 2010

Designed to help electric motor bearings run cooler and last longer, Monolec® Extend EM Grease (1282) increases motor efficiency by decreasing drag. It offers mechanical stability even in high-moisture environments and contains Monolec proprietary wear-reducing additive. Resistant to oxidation, NLGI grade 2 grease protects bearings against rust and corrosion and also resists water spray-off. It will not bleed into motor windings and maintains pumpability at low temperatures. Read More

lubricants, portable tools

Battery-Powered Grease Gun suits frequent, large-scale lubrication.

April 20, 2010

Battery Powered Clear Grease Gun features high-impact, fracture-resistant clear tube. Tube collars made of T6061 aircraft aluminum, and gun has maximum pressure of 8,500 psi, delivers up to 4.9 oz of grease per minute, and provides 19.2 volts of power. It comes with two 1,500-mAh rechargeable battery packs and 30-in. whip hose, as well as battery charger and hard plastic storage case. Cartridge holds 14.5 oz grease. Read More

lubricants, green & clean

Marine Wire Rope/Chain Lubricant has low toxicity formulation.

January 19, 2010

Protecting against rust and corrosion, Wirelife(TM) Low Tox® Penetrating Lubricant suits applications where wire ropes and chains operate in close proximity to waterways. Solution biodegrades slowly but with minimal toxic effect on environment, particularly aquatic organisms. Able to be dipped, sprayed on, or hand-applied, lubricant is optimized for load-carrying capacity and exhibits penetrating ability enhanced by petroleum solvent. Read More


Synthetic Oil offers long-term protection of wire rope.

January 19, 2010

Applied manually or via automatic spray systems, Wirelife(TM) Almasol® Syn Coating Lubricant provides outer surface protection for wire rope and cable in mining/construction industries and marine environments. Nonasphaltic synthetic lubricant clings to metal surfaces and reduces wear by minimizing wire-to-wire contact within rope. Synthetic base fluid as well as synergistic blend of wear-reducing additive and extreme pressure additive promote film strength and load carrying capacity. Read More

food processing & preparation, lubricants

Transparent Lubricant is suited for food machinery.

September 7, 2009

Manufactured with white mineral oils, performance additives, and organo-metallic thickeners approved for incidental food contact, Sheerplex® non-tacky, multi-purpose grease ensures clean/easy process for frequent washdown of food equipment. Providing pumpability in centralized lube systems, aluminum complex, NLGI No. 2 grease has operating temperature range of -20 to +400°F. Lubricant is NSF H1 registered, Kosher Pareve certified, and cleared for use in USDA-inspected facilities. Read More


Gear Lubricants can be filtered to low micron levels.

August 17, 2007

Featuring dual acting liquid additive, DUOLEC(TM) 1600 Series Vari-Purpose Gear Lubricants are thermally activated to provide dual levels of anti-wear and extreme pressure protection that form solid-like protective layer on metal surface. Products meet industrial gear claims of US Steel 224 and AGMA 9005 E02 as well as API GL-5 specification for severe automotive conditions. Series provides Timken OK Load of 75 lb along with minimized deposit formation. Read More


Gear Lubricant is used in low-temperature applications.

January 20, 2005

Suited for industrial and automotive applications, 9919 SYNOLEC® All-Climate Gear Lubricant is made with 100% synthetic base fluid and contains MONOLEC® and extreme pressure (EP) wear reducing additives. True SAE 75W-90 grade lubricant does not use viscosity index improvers to achieve multi-grade characteristics. It has pour point of -60°F for optimal subzero weather flow capabilities. Product meets requirements for MIL-PRF-2105E, SAE J-306, and SAE J-2360. Read More

transportation industry products

Automatic Transmission Fluid suits severe service uses.

October 21, 2004

Designed for heavy-duty automotive, truck, and construction equipment, 1150 TRANS-ALL EHP consists of synthetic blend with written approvals for GM Dexron III-H, Ford Mercon and Mercon V, and Allison C-4 Automatic Transmission applications. It may be substituted for Type A or C-3 fluids and meets all specifications for Caterpillar TO-2, ZF TE-ML-14B, Voith G607 and G1363, and Denison HF-0. Fluid is also suitable for Chrysler ATF +3 and +4. Read More

Other Company News from
Lubrication Engineers, Inc.