Company News

NuWaves Engineering

132 Edison Drive, Middletown, OH, 45044, USA

  • 513-360-0800

Latest New Product News from
NuWaves Engineering

Electronic Components & Devices, Mechanical Power Transmission

NuPower Xtender™ 06D05A Amplifier features PA’s aluminum chassis.

March 11, 2017

Providing saturated RF output power of 20W in transmit mode, NuPower Xtender™ 06D05A C-band Bidirectional Amplifier offers 15dB of gain in receive mode across 4.4GHz to 5.0GHz frequency. Having EVM of 4% at 2W of output power and 0 dBm nominal input drive level, amplifier delivers 43dB of RF gain at 0dBm input drive. Measuring 5.5 x 4.5 x 0.7 in. size, product is suitable in communications... Read More

Communication Systems & Equipment, Mechanical Power Transmission

HILNA™ CX Amplifier provides 2.5 dB noise figure.

February 23, 2017

Featuring 1.2 cu in. form factor, HILNA™ CX Amplifier delivers over 35 dB of gain across 5 GHz to 10 GHz range. Covering C- to X-band frequencies, unit offers +21 dBm of OIP3. LNA are also available for other bandwidths, military screening, form factors, filtering and gain.

Read More

Electronic Components & Devices, Mechanical Power Transmission

NuPower™ 12A01A Power Amplifier minimizes heat generation.

February 10, 2017

Designed with gallium nitride technology, 12A01A Power Amplifier offers 36dB of RF gain. Using 0 dBm nominal input drive level, unit is compact to use in variety of air- or ground-based tactical, test or training platforms. Housed in 3.00 x 2.00 x 0.65 in. package, 12A01A provides 4 W of linear RF power for boosting performance in data links and transmitters.

Read More

Mechanical Power Transmission

NuPower™ Xtender™ Bidirectional Amplifier features automatic transmit sensing.

January 28, 2017

Available in 12C04A model NW-BA-12C04A with part number, NuPower™ Xtender™ Bidirectional Amplifier operates with +5dBm input level with 3.5 dB noise figure. Featuring fast T/R mode switch time of < 1.5 μs, unit offers 15 watts of RF power across 1.0 to 2.5 GHz L- & S- band frequencies. Using Gallium Nitride power amplifier device technology, product features 6.9 cu in. small form factor... Read More

Electronic Components & Devices, Mechanical Power Transmission

NuPowerTM 06C09A C-band PA uses GaN-on-SiC MMIC technology.

December 8, 2016

Measuring 2.5 x 2.0 x 0.65 inch compact size, NuPowerTM 06C09A C-band Power Amplifier provides 40 dB RF gain and module efficiency of greater than 35%. Suitable for electronic warfare systems for airborne electronic attack and unmanned aircraft systems, unit offers 15 Watts saturated RF power in C-band of 4.5 GHz to 6.25 GHz frequency coverage and is ideal for integration into wide variety of... Read More

Electronic Components & Devices

C-Band 20 W RF Power Amplifier supports complex waveforms.

October 21, 2016

NuPower™ 06D05A provides saturated RF power of 20 W in C-band (4.4–4.9 GHz) with module efficiencies of up to 30%. For complex waveforms requiring linear PA, this product offers error vector magnitude (EVM) of 4% at 2 W output. RF gain of 40 dB is achieved with 0 dBm nominal input drive level, and 4.50 x 3.50 x 0.61 in. aluminum chassis promotes heat dissipation for higher-temperature... Read More

Electronic Components & Devices

RF Power Amplifier supports L- and S-band transmitters.

October 7, 2016

Housed in 1.8 x 1.8 x 0.5 in. rugged aluminum chassis, NuPower™ 12A03A delivers minimum of 5 W of RF power from 1.0–2.5 GHz when driven with 0 dBm (1 mW) RF input signal. Device is also available in 30 dBm (1 W) input power level version, allowing plug-and-play use with various data transceivers. With low current draw of 0.85 A at +28 Vdc, amplifier supports array of RF communications,... Read More

Test & Measuring Instruments

RF Upconverter supports 2 MHz to 3 GHz systems.

September 22, 2016

Accepting user-programmable IF input signal from 2–70 MHz, Model RF2-3000UCV1 delivers RF output at any user-programmable frequency between 2 MHz and 3 GHz, with tuning resolution of 5 kHz. Multi-octave device has 50 dB of attenuation control with incremental steps of 0.5 dB. Housed in 1.0 x 2.5 x 3.5 in. ruggedized aluminum enclosure, upconverter operates at 6 Vdc and features SMA RF... Read More

Electronic Components & Devices

RF Power Amplifier features multi-octave operation.

September 13, 2016

Designed for VHF to S-band transmitters and data radios, NuPower™ 11B02A typically delivers 10 W of RF power from 225–2550 MHz when driven with 3 dBm RF input signal. Amplifier provides standby to transmit switching speed of less than 30 µs, conserving energy between transmit cycles in power-limited applications. Housed in 2.34 x 1.96 x 0.620 in. aluminum chassis, unit features broad... Read More

Electronic Components & Devices

RF Power Amplifier supports electronic warfare applications.

August 1, 2016

When driven with 0 dBm RF input signal, NuPower™ Model 12A03A delivers minimum of 5 W RF power from 1.0–2.5 GHz. Unit is also available in 30 dBm (1 Watt) input power level version, allowing plug-and-play use with various data transceivers, such as L-3 Communications Bandit radio. Housed in 1.8 x 1.8 x 0.5 in. rugged aluminum chassis, amplifier features low current draw of 0.85 A at +28 Vdc,... Read More

Electronic Components & Devices

RF Power Amplifier covers 1,700-2,400 MHz frequency range.

July 18, 2016

With module efficiencies of 35–55%, NuPower™ 12D05A provides saturated RF power of 35 Watts in L-band and 20 Watts in S-band. Amplifier offers 44 dB of RF gain with nominal input drive level of 0 dBm. Aluminum chassis, measuring 4.50 x 3.50 x 0.61 in., provides heat dissipation and is small enough for integration into air- or ground-based tactical, test, or training platforms. Device can be... Read More

Electronic Components & Devices

Broadband RF PA Module delivers multi-octave operation.

June 9, 2016

Suited for VHF to S-band transmitters, transceivers, and data links that do not require linear performance, NuPower™ 11C01A (NW-PA-11C01A) delivers 10 W min and 15 W typ of RF power from 225–2,400 MHz when driven with 0 dBm (1 mW) RF input signal. Features include 25%–45% power efficiency, 40 dB RF gain, <2 µsec standby to transmit switching speed, and +11 to +32 Vdc supply... Read More

Communication Systems & Equipment, Electronic Components & Devices

Custom RF Filters enhance military/commercial system performance.

May 16, 2016

Custom quick-turn RF filters meet demands of military and commercial systems/sub-systems. Options include frequencies spanning HF to 20 GHz, 3 dB bandwidths from 0.1% to 28%, and up to 50 W power handling. Along with Bandpass, Lowpass, Highpass, and Bandstop (Notch) filter shapes, products are available in standard Cavity, Lumped Element, and Distributed (Stripline or Microstrip) filter... Read More

Communication Systems & Equipment, Electronic Components & Devices

Broadband RF PA (10 W) supports VHF through S-band.

April 26, 2016

Supplied in 2.34 x 1.96 x 0.620 in. rugged aluminum chassis, NuPower™ 11B02A delivers 7 W min and 10 W typ RF power from 225–2,600 MHz when driven with 3 dBm (2 mW) RF input signal. Standby to transmit switching speed of <100 msec fosters accelerated switching between operating modes and consequently conserving energy. This broadband RF power amplifier (PA), suited for VHF to S-band... Read More

Communication Systems & Equipment, Electronic Components & Devices, Mechanical Power Transmission

S-Band RF PA Module (30 W) targets communications, telemetry, EW.

November 5, 2015

Providing 30 W ave and 20 W min RF output power, solid-state NuPower 05E05A operates from 2,000–2,600 MHz for continuous wave (CW) and near-constant-envelope waveforms. This connectorized power amplifier (PA) module, supplied in 4.50 x 3.50 x 0.61 in. aluminum chassis and suited for S-band transmitters and data links, has nominal 0 dBm (1 mW) input signal and provides 44 dB RF gain... Read More

Electronic Components & Devices

RF PA Module (10 W) works with L- and S-band equipment.

October 5, 2015

Supplied in 3.00 x 2.00 x 0.65 in. aluminum chassis with +85°C max baseplate temperature rating, NuPower™ 12B01A (Part No. NW-PA-12B01A) provides RF amplification for transmitters, transceivers, and data links that do not require linear performance. This broadband RF power amplifier (PA) for L- and S-band equipment delivers 10 W min and 13 W typ of RF power from 1,000–2,500 MHz when... Read More

Electronic Components & Devices

S-Band RF BDA Module works with OFDM transceivers.

May 7, 2015

NuPower Xtender™ 12E06A linear bidirectional amplifier (BDA), operating across 1,980–2,500 MHz range, generates 12 W of RF power for QPSK modulated signals, 6.3 W for 16QAM, and 2.5 W for 64QAM. With 25 dB RF transmit gain and 12 dB receive gain, broadband solution comes in 4.00 x 2.00 x 0.65 in. ruggedized aluminum chassis and is suited for high-performance S-band Orthogonal Frequency... Read More

Electronic Components & Devices

RF Power Amplifier features optimized SWaP profile.

December 4, 2014

Housed in 4.50 x 3.50 x 0.61 in. aluminum chassis, NuPower™ 13G05A provides saturated RF power of at least 35 W from 800–2,000 MHz with greater than 40% efficiency across frequency band. With nominal input drive level of 0 dBm, L-band unit offers 45 dB of RF gain. Device is small enough for integration into air- or ground-based tactical, test, or training platforms. It can be used with... Read More

Electronic Components & Devices, Optics & Photonics

RF Power Amplifier integrates linearization technology.

August 1, 2013

Designed for half-duplex RF transceivers with amplitude-modulated waveforms, Xtender™ Linear Bidirectional S-Band Power Amplifier module, Model NW-LBSSPA-10W-2.2-2.5, generates 6 W of average RF output power from 2,200–2,500 MHz, given 10 dB peak-to-average power ratio waveform. With continuous wave signals, amplifier generates 10 W of RF output power. Automatic transmit sensing circuitry... Read More

Electronic Components & Devices

Power Amplifier Modules include S- and C-band versions.

June 5, 2013

Based on Gallium Nitride (GaN) technology, NuPower™ S- and C-band PA modules come in ruggedized packages and exhibit typical efficiencies from 20%–40%. Solid-state PAs accept nominal 0 dBm input and deliver at least 15 W of saturated power across 2,500–6,000 MHz. With 3.15 in.³ form factor, modules suit restrictions of size, weight, and power-constrained applications, such as... Read More

Other Company News from
NuWaves Engineering