Company News

Steinmeyer

56 Middlesex Tpke., Burlington, MA, 01803, USA

  • 781-273-6220

Latest New Product News from
Steinmeyer

Fasteners & Hardware, Machinery & Machining Tools

optiSLITE Miniature Ball Screws delivers lower friction torque.

December 22, 2016

optiSLITE Miniature Ball Screws are suitable for linear axis stage applications such as atomic force microscopes, nanoscale machining and wafer dicing. Available in standard lengths and nut designs, ball screws feature shaft diameters down to 5 mm and pitch down to 1 mm. Offering dynamic delivery of linear motion at high standards of precision and longevity, units meet nanopostioning... Read More

Fasteners & Hardware, Machinery & Machining Tools

Xi-Plus Precision Ball Screws offers shaft diameter from 16-125 mm.

November 18, 2016

Xi-Plus Precision Ball Screws have been designed to reduce vibrations and noise due to their smoothly finished surface.  These precision ball screws feature  shaft diameters  between 16-125 mm. 

Read More

Machinery & Machining Tools

Miniature Ball Screws offer solution for pipetting systems.

October 21, 2016

Undergoing proprietary finishing process that removes micron-sized peaks on shaft raceway, optiSLITE Miniature Ball Screws deliver low friction torque for smooth running and optimized servo response. Units are available in standard lengths and nut designs with shaft diameters down to 5 mm and pitch down to 1 mm. Ball screws support delicate positioning in laboratory instrument applications, such... Read More

Machinery & Machining Tools

Accuracy-Optimized, Miniature Ball Screws feature smooth raceways.

September 8, 2016

To promote positioning performance in semiconductor, optics, medical instrument, and metrology applications, optiSLITE miniature ball screws feature low-friction torque for smooth running and accuracy. Finishing process, by removing micron-sized defects on shaft raceway, ultimately enables delivery of positioning accuracy required in precision applications. Shaft diameters are offered down... Read More

Machinery & Machining Tools

Precision Ball Screws deliver quiet performance.

August 31, 2016

With smooth raceway surface, Xi-Plus Precision Ball Screws achieve quiet operation with minimized vibration. Products undergo proprietary finishing process that removes micron-sized defects on shaft raceway which are responsible for high pitched whistling and rough running characteristics. Featuring shaft diameter from 16–125 mm, ball screws offer dynamic delivery of linear motion with... Read More

Machinery & Machining Tools

Ball Screws operate with linear actuators.

August 2, 2016

Offered in wide range of diameter, leads, and nut configurations, Ball Screws are specifically engineered for low duty cycle applications of linear actuators. Units feature dynamic load capacity up to 1,400 kN and may be specified up to 100% of DLC. Rolled versions are also available upon request. Read More

Machinery & Machining Tools

Ball Screws exceed 1 million newton capacity.

December 21, 2015

With diameters from 32–160 mm and pitch ranging from 10–50 mm, using ball sizes up to 19 mm, UltraThrust Ball Screws offer dynamic capacities beyond 1 million newtons. Units are available in several standard and custom ball nut configurations complete with precision ground shafts to 6 m in length, including finished journals. Offering typical efficiency of 90+%, ball screws are suited for... Read More

Mechanical Power Transmission

XY Stage features internal motor and controller.

August 31, 2015

Measuring 210 x 210 mm with height of 50 mm, Model KT210-EDLM provides 100 x 100 mm travel with accuracy of ±13.6 µm, repeatability of ±2.7 µm, and linear runout of ±4 µm. Unit features point to point motion as standard; programming in steps; 1 external input and output; and communication via USB or RS232. With direct drive ironless linear motor, cable carriers, and controller... Read More

Machinery & Machining Tools

Ultraminiature Ball Screws target medical applications.

November 18, 2014

Available in diameters as small as 3 mm with choice of 1 or 0.5 mm pitch, Ultraminiature Ball Screws are manufactured from standard tool steel, hardened and precision ground to meet ISO tolerances from P0 to P5. Stainless steel material is available as option. Units are equipped with 1 of 4 types of ball nuts, with or without preload. In addition, ball screws are capable of being back driven,... Read More

Mechanical Power Transmission

XY Stage is driven by ironless core linear motor.

January 10, 2014

Driven by 3-phase motor, KT230-EDLM linear positioning stage offers 110 X 110 mm travel, ±3 micron positional accuracy, and 0.05 micron repeatability. Electromagnetic brake is included as safety feature in event of power loss. Integrated temperature sensor and Hall effect limit switches are also standard. Stage body is manufactured from black-anodized, low-distortion aluminum alloy and... Read More

Controls & Controllers

Point to Point Motion Controller features compact design.

December 3, 2013

Measuring 100 x 100 x 25 mm, FMC200 series supports range of motors, including linear brushless, DC brush, and stepper types, and accommodates 9–36 Vdc input. Up to 3 axes can be controlled from one unit, and second FMC controller can be connected via FMC-Link to add as many ports as needed for applications requiring multi-axis setup with more than 3 axes. Open loop as well as closed loop... Read More

Material Handling & Storage, Mechanical Power Transmission

Linear Stage features self locking ball screw.

September 19, 2013

Featuring 165 mm wide die cast base profile, Model PLT165-AC comes in lengths from 400–1,050 mm with travels from 100–750 mm. Unit is driven by AC servo motor or optional stepper motor, combined with high-precision ball screw, which provides self-locking feature. Stage is also equipped with limit switches and rotary encoder mounted directly on motor. Manufactured from low distortion... Read More

Mechanical Power Transmission

Precision Rotary Stage delivers accuracy and repeatability.

August 6, 2013

As worm gear driven unit with rotary encoder, DT130-DC stage features positional accuracy of ±0.07°, repeatability of ±0.007°, max speed of 15 rpm, and load capacity of 50 N. Drive mechanism is DC servo-motor, and this product can also be equipped with direct reading encoder attached to rotating stage for higher positioning accuracy. Stage body is manufactured from low... Read More

Controls & Controllers, Machinery & Machining Tools, Material Handling & Storage, Mechanical Power Transmission, Mounting & Attaching Products

XYZ Stage with Granite Base is suited for medical dispensing.

June 4, 2013

Comprising 2 PMT160-300-SM stages for X and Y axis and one LTP60-50-SM as Z axis, 3-axis positioning system features granite platform, measures 71 x 67 x 50 cm, and weighs 120 kg. This heavy-duty, low-maintenance system, suited for medical dispensing applications, has integrated MDRIVE controller. Positional accuracy is <±20 μm, repeatability is <±5 μm, and resolution is 1 μm... Read More

Mechanical Power Transmission

Dual Axis Positioning System is suited for liquid handling.

May 10, 2013

Suited for liquid handling systems and medical dispensing applications, series LTZ incorporates precision composite belts and is driven by stepper motors. This 2-axis positioning system features linear guidance as provided by miniature profile guideways, positional accuracy of 50 μm, and speed of 20 mm/s. Accommodating loads up to 500 g, system offers respective horizontal and vertical travels... Read More

Mechanical Power Transmission

Compact Rotary Stage is driven by torque motor.

February 19, 2013

With overall height of 100 mm and width of 240 mm, DT240 delivers repeatability of ±0.0001°, max speed of 480 rpm, and continuous torque of 8 Nm. Precision rotary stage, manufactured from low-distortion aluminum alloy (black anodized), is also equipped with angular encoder with resolution of 0.0001° and contactless hall sensor for reference switch. Suitable applications... Read More

Material Handling & Storage, Mechanical Power Transmission

Micro Stages offer 2 travel options.

October 9, 2012

Measuring 110 x 196 x 45 mm, Models MT196-100-2LM and MT196-200-2LM offer 100 and 200 mm travels, respectively. Units provide positional accuracy of 2 µm and straightness/flatness runout of ±5 µm for 100 mm of travel and ±10 µm for 200 mm of travel with repeatability of ±0.2 µm. Manufactured from anodized aluminum, stages include preloaded cross roller bearings, fixed stops,... Read More

Machinery & Machining Tools

Precision Hybrid Ball Screws utilize ceramic rolling elements.

September 6, 2012

By using balls manufactured from silicon nitride instead of tool or stainless steel, Hybrid Ball Screws eliminate micro-welding in ball nut, minimizing friction and extending lifetime. Units are available in diameters ranging from 6-40 mm with pitches of 1, 3, 5, and 10 mm. Applications include semiconductor production machines, inspection equipment, medical/dental devices, aerospace robotics,... Read More

Machinery & Machining Tools

Precision Ball Screws feature friction-minimizing deflectors.

August 3, 2012

UltraSpeed precision ball screws are based on ball return system with deflectors that guide balls into return channel spanning whole nut length. With complex geometry that minimizes friction, precision-milled deflectors allow for high speeds with minimal wear. Ball screws come in 32-100 mm dia versions and have lead-to-diameter ratios from 0.5:1 to 1:1. Speed ratings are up to and beyond... Read More

Machinery & Machining Tools

Ultra Miniature Ball Screws suit Life Sciences applications.

July 13, 2012

Available in diameters as small as 3 mm with choice of 0.5 or 1 mm pitch, ULTRAMINIATURE ball screws are manufactured from standard tool steel, hardened, and then precision ground to meet ISO tolerances from P0-P5. Stainless steel material is available as option. Products are equipped with one of 4 types of ball nuts, with or without preload, and custom lengths are available with journals... Read More

Other Company News from
Steinmeyer