ZIRCAR Ceramics, Inc. News Stories and Press Releases Page 10085205

Thermal Insulation handles temperatures to 1800-

Featuring composite fiber/binder microstructure, Alumina Insulation Type AL-28/1800 is produced in various standard flat boards in sizes to 18 x 24 x 2 in. It exhibits bulk density of 0.44 g/cc and features composition of 80% Al2O3, 20% SiO2. At 1,800Ã-

Thermal & Heating Equipment

Thermal Insulation handles applications to 950-

MICROSIL Microporous Silica Thermal Insulation, with low-density construction of 230 kg/mÃ-³, minimizes conductive heat transfer. Billions of nano-pockets block convection and reflect heat energy back to source. Product combines silica powders, refractory oxides, and glass reinforcing agents and offers thermal conductivity of 0.038 W/mK at 800Ã-

Adhesives & Sealants

Refractory Adhesive contains no organic material.

HITAC-4 bonds low-density insulation materials without adding significant mass to fibrous ceramic insulation system. Once fired to 800Ã-

Thermal & Heating Equipment

Aluminum Silica Insulation exhibits uniform hardness and density.

TYPE Z-500 is made of 60% SiO2 and 40% Al2O3 with nominal bulk density of 50 pcf and average surface hardness of 93 on A scale. It exhibits 0.65% shrinkage after 25 hr at 800Ã-

Thermal Blankets handle high temperatures.

Model 3000F Blanket Modules are made of TYPE AB (96% Al(2)O(3)) and TYPE MB (80% Al(2)O(3) - 20% SiO(2)) alumina fiber that is compressed and banded for easy installation. Blankets have stainless steel or ceramic mounting hardware. Various sizes, shapes and densities are available. Stainless steel mounting anchors and hardware are matched to specific applications.

Castable Alumina can be made into furnace parts.

Ziralcast 95 is made primarily of pure fused alumina bubbles that can be cast into structural components for furnaces such as flue liner/stack, door vestibules, and furnace crowns. Other furnace furniture that may be cast includes crucible holder in glass melting research or covers for metal melting and transport systems. After initial set time of 1-4 hr, and final set time of 7-10 hr, it reaches...

Thermal & Heating Equipment

Thermal Insulation handles temperatures to 1800-

Featuring composite fiber/binder microstructure, Alumina Insulation Type AL-28/1800 is produced in various standard flat boards in sizes to 18 x 24 x 2 in. It exhibits bulk density of 0.44 g/cc and features composition of 80% Al2O3, 20% SiO2. At 1,800Ã-

Thermal & Heating Equipment

Thermal Insulation handles applications to 950-

MICROSIL Microporous Silica Thermal Insulation, with low-density construction of 230 kg/mÃ-³, minimizes conductive heat transfer. Billions of nano-pockets block convection and reflect heat energy back to source. Product combines silica powders, refractory oxides, and glass reinforcing agents and offers thermal conductivity of 0.038 W/mK at 800Ã-

Adhesives & Sealants

Refractory Adhesive contains no organic material.

HITAC-4 bonds low-density insulation materials without adding significant mass to fibrous ceramic insulation system. Once fired to 800Ã-

Thermal & Heating Equipment

Aluminum Silica Insulation exhibits uniform hardness and density.

TYPE Z-500 is made of 60% SiO2 and 40% Al2O3 with nominal bulk density of 50 pcf and average surface hardness of 93 on A scale. It exhibits 0.65% shrinkage after 25 hr at 800Ã-

Thermal Blankets handle high temperatures.

Model 3000F Blanket Modules are made of TYPE AB (96% Al(2)O(3)) and TYPE MB (80% Al(2)O(3) - 20% SiO(2)) alumina fiber that is compressed and banded for easy installation. Blankets have stainless steel or ceramic mounting hardware. Various sizes, shapes and densities are available. Stainless steel mounting anchors and hardware are matched to specific applications.

Castable Alumina can be made into furnace parts.

Ziralcast 95 is made primarily of pure fused alumina bubbles that can be cast into structural components for furnaces such as flue liner/stack, door vestibules, and furnace crowns. Other furnace furniture that may be cast includes crucible holder in glass melting research or covers for metal melting and transport systems. After initial set time of 1-4 hr, and final set time of 7-10 hr, it reaches...