Company News

B&K Precision Corporation

22820 Savi Ranch Pkwy., Yorba Linda, CA, 92887, US

  • 800-462-9832

General Information:
James Schada
Phone: 714-921-9095
E-mail this person

Share Like Tweet Add Email

Latest New Product News from
B&K Precision Corporation

Test & Measuring Instruments, Electrical Equipment & Systems, Electronic Components & Devices

DC Electronic Loads sink up to 240 A. .

October 1, 2015

Operating up to 500 V with power range from 250–1,500 W, Models 8610, 8612, 8614, and 8616 provide adjustable current slew rate, fast transient operation speeds up to 25 kHz, and built-in battery and LED test mode functions. Programmable units can operate in CV, CC, CR, and CW modes. Supplied in 19 in. rackmountable form factor, 16-bit measurement systems offer dual-line display and are suitable for testing DC power supplies, DC-DC converters, batteries, LED drivers, and PV arrays. Read More

Test & Measuring Instruments, Communication Systems & Equipment

Bench LCR Meter offers sweep and bin sorting functions.

September 30, 2015

Equipped with USB, GPIB, and LAN interfaces, model 891 can measure inductance, capacitance, and DC resistance with 0.05% best impedance accuracy over fully adjustable test frequency range of 20 Hz to 300 kHz. Selectable test levels include 0.5 and 1 Vrms, and such features as 300-point linear and logarithmic sweep function, bin comparator, and remote control interfaces make this unit suited for characterizing components in lab, QC, and small volume production environments. Read More

Electrical Equipment & Systems

Rackmount DC Power Supply offers multiple volt/amp combinations.

September 8, 2015

Suitable for benchtop or ATE system applications, programmable model 9117 delivers up to 3,000 W of output power in any combination of voltage up to 80 V and current up to 120 A. Multi-ranging capability automatically recalculates voltage and current limits for each setting. Along with 2U, 19 in. rackmountable design, features include internal memory storage for saving/recalling up to 100 different settings and limits, independent voltage and current control knobs, and bright VFD display. Read More

Electrical Equipment & Systems

Programmable DC Power Supplies offers 3 isolated outputs.

June 2, 2015

Each model of 9130B Series offers different configuration of variable output voltage and current on 2 channels: 0–30 V, 0–3 A (9130B); 0–30 V, 0–6 A (9131B); and 0–60 V, 0–3 A (9132B). Third channel output is rated 0–5 V, 0–3 A for all models, and outputs can be adjusted independently or combined in series or parallel to output higher voltage or current. With 19 in. half-rack form factor, series also offers constant voltage and constant current modes, tracking mode, and various interfaces. Read More

Electrical Equipment & Systems

AC Source features Power Line Disturbance simulator.

May 4, 2015

Suitable for simulating various AC power conditions, model 9801 outputs up to 300 VA and measures AC power characteristics. Users can operate this 19 in., half-rack, single-phase AC source in 0–300 V continuous sweep range or 150 V/300 V auto-switching range with adjustable start and stop phase angle control. Other features various protection; built-in PLD simulator; list, sweep, and dimmer modes; and adjustable frequency from 45–500 Hz. Also, power source can deliver up to 12 A peak. Read More

Electronic Components & Devices

DC Electronic Loads offer transient operation up to 25 kHz.

January 28, 2015

Comprising 3 models ranging from 150–250 Watts, 8600 Series can sink current up to 60 A at wide voltage ranges up to 500 V. Programmable benchtop units can operate in constant current, constant voltage, constant resistance, and constant power modes. Built-in battery and LED test mode functions make loads suitable for testing variety of DC sources. For remote control and programming, series includes standard GPIB, USB, and RS232 interfaces supporting USBTMC and SCPI communication protocols. Read More

Electrical Equipment & Systems

Programmable DC Power Supplies deliver up to 150 V, 25 A.

December 18, 2014

Comprising four 200–600 W models, Series 9200 can deliver power in any combination of rated voltage and current up to max output of power supply. Multi-range units feature 1 mV/0.1 mA display, output On/Off control, and intuitive user interface with numerical keypad, cursor keys, and rotary control knob. For programming and remote control, 9200 Series offers list mode programming, remote sense, and standard USBTMC-compliant USB, RS-232, and GPIB interfaces supporting SCPI commands. Read More

Electrical Equipment & Systems

Multi-Range DC Power Supply affords application flexibility.

October 3, 2014

With constant voltage and constant current modes, model 9111 automatically recalculates voltage and current limits for each setting to deliver any combination of its 60 V/8 A output range within 180 W. Front panel offers 10 mV/1 mA resolution display, output on/off control, and rotary control knob to adjust voltage and current settings, while internal memory storage lets users save and recall up to 400 voltage/current presets. Range of protections (OVP, OCP, OTP) are included as standard. Read More

Test & Measuring Instruments

Entry-Level Digital Storage Oscilloscope offers 100 MHz bandwidth.

August 29, 2014

Achieving 1 GSPS sampling rate, 2190D bench digital storage oscilloscope (DSO) comes with 2 passive 10:1 probes, accommodates USB-to-GPIB adapter, and lets users save up to 20 oscilloscope setups and 10 different waveforms to internal memory. Dual-channel DSO features 7 in. widescreen color display and offers waveform memory up to 40,000 points, pass/fail limit testing, digital filtering, waveform recorder, 32 automatic measurements, and remote PC connectivity via RS232 and USB. Read More

Electrical Equipment & Systems, Electronic Components & Devices, Green & Clean

DC Power Supplies suit solar array applications.

July 25, 2014

Available in 600 and 1,000 V models delivering output power up to 5.1 kW, PVS Series features built-in solar array simulator to generate photovoltaic I-V curves. Front panel includes VFD display, protection LED indicators, and numerical keypad with rotary control knob and cursors for setting output levels. For programming, power supplies provide list mode function, external analog programming and monitoring interface, and standard USB, RS-232, GPIB, and LAN interfaces supporting SCPI commands. Read More

Electronic Components & Devices

Function/Arbitrary Waveform Generator has 2 independent channels.

June 24, 2014

Dual-channel models 4063, 4064, and 4065 respectively generate sine waveforms up to 80, 120, and 160 MHz. Featuring pulse generator and 512k-point arbitrary waveform generator on one channel, these instruments can generate pulses with <100 ps jitter and output 12 nsec width pulses at frequencies as low as 0.1 Hz. Other features include adjustable rise and fall times, rotary control knob, numeric keypad, function keys, built-in counter, Sync output, and trigger I/O terminal. Read More

Electrical Equipment & Systems

DC Power Supplies deliver full output power of 1,200 W.

May 30, 2014

Suitable for automotive and benchtop or ATE system applications, Model 9115-AT provides built-in automotive test functions, while Model 9116 offers higher voltage range up to 150 V. Programmable units include VFD display, independent voltage and current control knobs, and numerical keypad as well as internal memory storage to save and recall up to 100 instrument settings. On rear, units provide standard USBTMC-compliant USB, RS-232, GPIB, and RS-485 interfaces supporting SCPI commands. Read More

Test & Measuring Instruments

Digital Storage Oscilloscopes feature 1 GSa/s sampling rates.

November 25, 2013

Providing 2 Mpts of waveform memory, 2510 Series combines floating point measurement capabilities with built-in DMM and trend plot recorder functions. Models 2511 and 2512 are 60 and 100 MHz devices, respectively, that provide 2 non-isolated 300 V CAT II rated inputs suitable for general electronics. For industrial applications, 60 MHz Model 2515 and 100 MHz Model 2516 deliver 2 fully isolated 1,000 V CAT II/600 V CAT III rated inputs. All include 5.7 in. color display and USB connectivity. Read More

Electrical Equipment & Systems

Programmable DC Power Supplies support remote control.

September 20, 2013

With respective output voltages up to 150, 300, and 600 V, models XLN15010, XLN30052, and XLN60026 can deliver 1,560 W max from 1U rackmountable form factor. Front panel interface features numeric keypad and rotary knob, while rear hosts USB and RS485 interfaces. Other features include DB25 analog programming interface, GPIB and LAN (-GL) interface options, support for programmed test sequences with up to 150 steps, adjustable voltage and current slew rates, and multiple protection modes. Read More

Electronic Components & Devices

Waveform Generators provide up to 50 MHz output.

September 12, 2013

Comprising 4 dual-channel function/arbitrary waveform generators, 4050 Series produces precise sine, square, triangle, pulse, and arbitrary waveforms. Main output voltage can be varied from 0–10 Vpp into 50 Ω, while secondary output can be varied from 0–3 Vpp into 50 Ω. Providing 48 built-in arbitrary waveforms, 14-bit, 125 MSa/s units can create and load up to 10 custom 16 kpt waveforms using included waveform editing software via USB interface on rear.
Read More

Test & Measuring Instruments

Digital Storage Oscilloscope has 32,000 point waveform memory.

January 11, 2011

With bandwidth of 25 MHz, 500 MSPS rate, and 2 input channels, model 2530B is suited for use in educational and basic industry applications. Internal storage allows up to 20 different settings and 10 waveforms to be saved and recalled, while math operations offer additional analysis tools. Along with 5.7 in. color display, portable unit features triggering capabilities, mask testing, and digital filtering as well as remote PC connectivity, waveform recorder, and 32 automatic measurements. Read More

Electrical Equipment & Systems

Triple Output DC Power Supply features configurable outputs.

December 23, 2010

Model 1673, 400 W triple-output DC power supply features 2 variable outputs, configurable from 0-32 Vdc, that can be used independently or interconnected in series or parallel configurations, as well as one fixed 5 Vdc output. With quad digital display, users can visually monitor output voltage and current on both variable outputs simultaneously. Unit can be set via front panel to provide constant voltage or constant current operation with automatic crossover. Read More

Electronic Components & Devices

Programmable Pulse Generators operate from 0.1 Hz to 50 MHz.

October 11, 2010

Delivering clean and accurate pulses for testing digital circuits and systems based on TTL, CMOS, or ECL logic families, Models 4033/4034 provide flexible control over pulse timing, level thresholds, and transition edges. They also support multiple trigger modes and offer closed case calibration as well as SCPI-compatible programmability via GPIB or RS-232. Functioning as 2 units in one, Model 4034 provides dual-channel outputs that can operate independently or in sync. Read More


Waveform Editing Software creates real world test signals.

August 11, 2010

WaveXpress(TM) can be used to design, debug, or create complex test signals that can be transferred from PC and reproduced on arbitrary waveform generators (AWGs) via GPIB, RS-232, or USB interfaces. When used with AWGs and digital storage oscilloscope program functions as complete test solution for circuit validation. Noise distributions library, panning and zooming down to individual point level, and Python programming language support are all standard. Read More

Electrical Equipment & Systems

Programmable DC Power Supplies target ATE applications.

June 18, 2010

Housed in 1U high, 19 in. wide package, XLN Series delivers up to 1,440 W of clean power on single output and provides average command processing times of less than 50 ms. Units include built-in voltage and current meters displaying setting and output values concurrently, and intuitive user interface with full keypad and rotary knob. GL versions include GPIB, LAN, USB, and RS485 interfaces. Using RS485 interface, up to 31 power supplies can be controlled from one PC. Read More

Other Company News from
B&K Precision Corporation