Company News

B&K Precision Corporation

22820 Savi Ranch Pkwy., Yorba Linda, CA, 92887, USA

  • 800-462-9832

Latest New Product News from
B&K Precision Corporation

Electrical Equipment & Systems

Multi-Range DC Power Supplies operate on constant voltage and current.

April 14, 2017

Available in 9103 and 9104 models, Multi-Range DC Power Supplies are used in electronics manufacturing and engineering applications. Featuring dual 4-digit LED display, On/Off control and keypad and rotary control knobs for voltage and current on the front panel, units are configurable to square, triangular, or trapezoidal waveforms. Offering adjustable voltage and current limits, 9103 model... Read More

Test & Measuring Instruments

Bench LCR Meters feature built-in adjustable DC bias source.

March 28, 2017

Available in 894 and 895 models, Bench LCR meters are designed with 4.3 in. color LCD display. Equipped with auto level control, DC resistance measurement, bin sorting function and cable-length compensation, meters provide 5 mVrms to 2 Vrms variable AC test signals. Unit’s 30 ohm internal impedance setting offer 66.7 mArms drive current and AC current ranges can be selectable using 30/50/100... Read More

Electronic Components & Devices

4050B Series Waveform Generators feature 4.3 in. color LCD display.

February 2, 2017

Producing up to 60MHz Sine/Square/Triangle/pulse waveforms, 4050B Series Arbitrary Waveform Generators offer output at faster rise times and lower jitters. Unit's secondary output provides same output as main output and generates 10 MHz reference clock output. Device has channel tracking and combine functions where both channels have 0 to 10Vpp into 50ohms. Product comes with LAN interface... Read More

Test & Measuring Instruments

2190E Digital Storage Oscilloscope features waveform recorder.

December 1, 2016

Offering entry-level 100MHz bandwidth with 1GSa/s sampling rate, 2190E Digital Storage Oscilloscope has higher bandwidth at low cost. Used mainly in technical schools, DSO has 7” widescreen color display with 800 x 480 pixels, waveform memory up to 40,000 points and recorder, pass/fail limit testing and digital filtering. Unit has USB host port, LAN interface, options to disable Auto Set,... Read More

Test & Measuring Instruments

High-Accuracy Handheld LCR Meter has 4-terminal configuration.

June 10, 2016

Providing test frequencies up to 100 kHz, selectable test signal levels, and 4-terminal socket, model 880 measures inductance, capacitance, and resistance with basic impedance accuracy to 0.1%. Auto ranging function, single-push auto detect mode, as well as data recording, tolerance sorting, and relative mode functions are also standard. DC resistance measuring is also offered, and dual... Read More

Electronic Components & Devices

DC Electronic Load Module supports 300 W on each of 2 channels.

December 7, 2015

Intended for use with MDL Series modular programmable DC electronic load system, MDL302 supports full 300 W on each input channel with voltage and current operating range up to 80 V/45 A. Power density enables MDL Series mainframe to have up to 8 or more 300 W channels. Able to operate in constant current, constant voltage, constant resistance, constant power, and constant impedance mode,... Read More

Electrical Equipment & Systems

Programmable Power Sources have single-phase AC outputs.

November 20, 2015

In addition to respectively delivering up to 750 and 1,500 VA, models 9803 and 9805 can measure AC voltage, current, and power parameters. Both power sources can operate in 0–300 V continuous sweep range or 150 V/300 V auto-switching range with adjustable start and stop phase angle control. Built-in PLD (power line disturbance) simulator, list, sweep, and dimmer mode makes these units... Read More

Electrical Equipment & Systems

Linear DC Power Supply offers 3 programmable outputs.

November 9, 2015

Able to be operated in CV and CC modes, 9129B has 19 in. half-rack form factor and features 3 isolated outputs that can be adjusted independently or combined in series or parallel to output higher voltage or current. Two channels offer variable voltage and current up to 30 V/3 A, while third variable channel is rated for 5 V/3 A. Along with programming and readback resolution of 10... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Test & Measuring Instruments

DC Electronic Loads sink up to 240 A. .

October 1, 2015

Operating up to 500 V with power range from 250–1,500 W, Models 8610, 8612, 8614, and 8616 provide adjustable current slew rate, fast transient operation speeds up to 25 kHz, and built-in battery and LED test mode functions. Programmable units can operate in CV, CC, CR, and CW modes. Supplied in 19 in. rackmountable form factor, 16-bit measurement systems offer dual-line display and are... Read More

Communication Systems & Equipment, Test & Measuring Instruments

Bench LCR Meter offers sweep and bin sorting functions.

September 30, 2015

Equipped with USB, GPIB, and LAN interfaces, model 891 can measure inductance, capacitance, and DC resistance with 0.05% best impedance accuracy over fully adjustable test frequency range of 20 Hz to 300 kHz. Selectable test levels include 0.5 and 1 Vrms, and such features as 300-point linear and logarithmic sweep function, bin comparator, and remote control interfaces make this unit suited... Read More

Electrical Equipment & Systems

Rackmount DC Power Supply offers multiple volt/amp combinations.

September 8, 2015

Suitable for benchtop or ATE system applications, programmable model 9117 delivers up to 3,000 W of output power in any combination of voltage up to 80 V and current up to 120 A. Multi-ranging capability automatically recalculates voltage and current limits for each setting. Along with 2U, 19 in. rackmountable design, features include internal memory storage for saving/recalling up to 100... Read More

Electrical Equipment & Systems

Programmable DC Power Supplies offers 3 isolated outputs.

June 2, 2015

Each model of 9130B Series offers different configuration of variable output voltage and current on 2 channels: 0–30 V, 0–3 A (9130B); 0–30 V, 0–6 A (9131B); and 0–60 V, 0–3 A (9132B). Third channel output is rated 0–5 V, 0–3 A for all models, and outputs can be adjusted independently or combined in series or parallel to output higher voltage or current. With 19... Read More

Electrical Equipment & Systems

AC Source features Power Line Disturbance simulator.

May 4, 2015

Suitable for simulating various AC power conditions, model 9801 outputs up to 300 VA and measures AC power characteristics. Users can operate this 19 in., half-rack, single-phase AC source in 0–300 V continuous sweep range or 150 V/300 V auto-switching range with adjustable start and stop phase angle control. Other features various protection; built-in PLD simulator; list, sweep, and... Read More

Electronic Components & Devices

DC Electronic Loads offer transient operation up to 25 kHz.

January 28, 2015

Comprising 3 models ranging from 150–250 Watts, 8600 Series can sink current up to 60 A at wide voltage ranges up to 500 V. Programmable benchtop units can operate in constant current, constant voltage, constant resistance, and constant power modes. Built-in battery and LED test mode functions make loads suitable for testing variety of DC sources. For remote control and programming, series... Read More

Electrical Equipment & Systems

Programmable DC Power Supplies deliver up to 150 V, 25 A.

December 18, 2014

Comprising four 200–600 W models, Series 9200 can deliver power in any combination of rated voltage and current up to max output of power supply. Multi-range units feature 1 mV/0.1 mA display, output On/Off control, and intuitive user interface with numerical keypad, cursor keys, and rotary control knob. For programming and remote control, 9200 Series offers list mode programming, remote sense,... Read More

Electrical Equipment & Systems

Multi-Range DC Power Supply affords application flexibility.

October 3, 2014

With constant voltage and constant current modes, model 9111 automatically recalculates voltage and current limits for each setting to deliver any combination of its 60 V/8 A output range within 180 W. Front panel offers 10 mV/1 mA resolution display, output on/off control, and rotary control knob to adjust voltage and current settings, while internal memory storage lets users save and recall up... Read More

Test & Measuring Instruments

Entry-Level Digital Storage Oscilloscope offers 100 MHz bandwidth.

August 29, 2014

Achieving 1 GSPS sampling rate, 2190D bench digital storage oscilloscope (DSO) comes with 2 passive 10:1 probes, accommodates USB-to-GPIB adapter, and lets users save up to 20 oscilloscope setups and 10 different waveforms to internal memory. Dual-channel DSO features 7 in. widescreen color display and offers waveform memory up to 40,000 points, pass/fail limit testing, digital... Read More

Electrical Equipment & Systems, Electronic Components & Devices, Green & Clean

DC Power Supplies suit solar array applications.

July 25, 2014

Available in 600 and 1,000 V models delivering output power up to 5.1 kW, PVS Series features built-in solar array simulator to generate photovoltaic I-V curves. Front panel includes VFD display, protection LED indicators, and numerical keypad with rotary control knob and cursors for setting output levels. For programming, power supplies provide list mode function, external analog programming and... Read More

Electronic Components & Devices

Function/Arbitrary Waveform Generator has 2 independent channels.

June 24, 2014

Dual-channel models 4063, 4064, and 4065 respectively generate sine waveforms up to 80, 120, and 160 MHz. Featuring pulse generator and 512k-point arbitrary waveform generator on one channel, these instruments can generate pulses with <100 ps jitter and output 12 nsec width pulses at frequencies as low as 0.1 Hz. Other features include adjustable rise and fall times, rotary control knob,... Read More

Electrical Equipment & Systems

DC Power Supplies deliver full output power of 1,200 W.

May 30, 2014

Suitable for automotive and benchtop or ATE system applications, Model 9115-AT provides built-in automotive test functions, while Model 9116 offers higher voltage range up to 150 V. Programmable units include VFD display, independent voltage and current control knobs, and numerical keypad as well as internal memory storage to save and recall up to 100 instrument settings. On rear, units... Read More

Other Company News from
B&K Precision Corporation