Lenthor Engineering

Lenthor Engineering (www.lenthor.com) Announces the Installation of Two ESI 5335 UV Laser Drilling Systems
Agricultural & Farming Products

Lenthor Engineering (www.lenthor.com) Announces the Installation of Two ESI 5335 UV Laser Drilling Systems

Milpitas, California –- Lenthor Engineering, a California based designer, manufacturer and assembler of RIGID-FLEX and FLEX printed circuit boards, announces the installation of two ESI 5335 UV Laser Drilling Systems.  This addition combines with Lenthor’s existing 5335 system as well as two 5330 systems. The 5335 incorporates ESI’s proprietary Third Dynamics technology.  With this...

Read More »
Lenthor Engineering (www.lenthor.com) Announces the Installation of Two ESI 5335 UV Laser Drilling Systems
Agricultural & Farming Products

Lenthor Engineering (www.lenthor.com) Announces the Installation of Two ESI 5335 UV Laser Drilling Systems

Milpitas, California –Â- Lenthor Engineering, a California based designer, manufacturer and assembler of RIGID-FLEX and FLEX printed circuit boards, announces the installation of two ESI 5335 UV Laser Drilling Systems.  This addition combines with Lenthor’s existing 5335 system as well as two 5330 systems. The 5335 incorporates ESI’s proprietary Third Dynamics technology. ...

Read More »
Fluid & Gas Flow Equipment

Lenthor Engineering (www.lenthor.com) Announces the Addition of MicroCraft E4M6151 Flying Probe Test System

Milpitas, California; Lenthor Engineering, a California based designer, manufacturer and assembler of RIGID-FLEX and FLEX printed circuit boards, announces the addition of MicroCraft’s E4M6151 Flying Probe Test System. The E4M6151 incorporates MicroCraft’s touch screen technology helping to make the E4M6151 the industries fastest high accuracy probe test system. With a useable test area...

Read More »
Fluid & Gas Flow Equipment

Lenthor Engineering (www.lenthor.com) Announces the Addition of MicroCraft E4M6151 Flying Probe Test System

Milpitas, California; Lenthor Engineering, a California based designer, manufacturer and assembler of RIGID-FLEX and FLEX printed circuit boards, announces the addition of MicroCraft’s E4M6151 Flying Probe Test System. The E4M6151 incorporates MicroCraft’s touch screen technology helping to make the E4M6151 the industries fastest high accuracy probe test system. With a useable test area...

Read More »
Agricultural & Farming Products

Lenthor Engineering (www.lenthor.com) Announces the Addition of ESI's 5335 UV Laser Drilling System

Milpitas, California –- Lenthor Engineering, a California based designer, manufacturer and assembler of RIGID-FLEX and FLEX printed circuit boards, announces the addition of ESI's 5335 UV Laser Drilling System.  The 5335 incorporates ESI's patented fifth generation motion beam positioner, capable of up to 14,000 points per second, along with an optical system designed to support the various...

Read More »
Agricultural & Farming Products

Lenthor Engineering (www.lenthor.com) Announces the Addition of ESI's 5335 UV Laser Drilling System

Milpitas, California –Â- Lenthor Engineering, a California based designer, manufacturer and assembler of RIGID-FLEX and FLEX printed circuit boards, announces the addition of ESI's 5335 UV Laser Drilling System.  The 5335 incorporates ESI's patented fifth generation motion beam positioner, capable of up to 14,000 points per second, along with an optical system designed to support the...

Read More »
Company News

Lenthor Engineering is Pleased to Announce Continuing Progress in its Capacity Expansion Plan

Milpitas, California; Lenthor Engineering, a California based designer, manufacturer and assembler of flex and rigid-flex printed circuit boards, is pleased to announce continuing progress in its capacity expansion plan. In order to stay ahead of increasing demand for Lenthor’s flex and rigid-flex fabrication services Lenthor has reserved over $3 million dollars in its fiscal 2019 capital...

Read More »
Company News

Lenthor Engineering is Pleased to Announce Continuing Progress in its Capacity Expansion Plan

Milpitas, California; Lenthor Engineering, a California based designer, manufacturer and assembler of flex and rigid-flex printed circuit boards, is pleased to announce continuing progress in its capacity expansion plan. In order to stay ahead of increasing demand for Lenthor’s flex and rigid-flex fabrication services Lenthor has reserved over $3 million dollars in its fiscal 2019 capital...

Read More »
Company News

Lenthor Engineering, a California Based Designer, Manufacturer and Assembler of Flex and Rigid-Flex Printed Circuit Boards Invests in Hakuto's Mach630NP Next-Gen Dry Film Laminator from Matrix USA

The Mach630NP was designed by Hakuto to solve yield issues stemming from the ever-growing expectations for smaller tolerances below 5 MIL. Other benefits of the machine include ease of use and low-cost maintenance, as well as quick change of rollers and offline cassette loading to maximize the overall use of time. Lenthor’s General Manager Rich Clemente states, “We are excited about this...

Read More »
Company News

Lenthor Engineering, a California Based Designer, Manufacturer and Assembler of Flex and Rigid-Flex Printed Circuit Boards Invests in Hakuto’s Mach630NP Next-Gen Dry Film Laminator from Matrix USA

The Mach630NP was designed by Hakuto to solve yield issues stemming from the ever-growing expectations for smaller tolerances below 5 MIL. Other benefits of the machine include ease of use and low-cost maintenance, as well as quick change of rollers and offline cassette loading to maximize the overall use of time. Lenthor’s General Manager Rich Clemente states, “We are excited about this...

Read More »
Company News

Lenthor Engineering Invests in Testing with CyberOptics Solder Paste Inspection System

Milpitas, California; Lenthor Engineering, a California based designer, manufacturer and assembler of Rigid-Flex and Flex printed circuit boards, announces the recent installation of a new CyberOptics SE500 solder paste inspection system. The SE500 will allow Lenthor to push inspection speeds to the highest level possible for even the most demanding assemblies without compromising on accuracy and...

Read More »
Company News

Lenthor Engineering Invests in Testing with CyberOptics Solder Paste Inspection System

Milpitas, California; Lenthor Engineering, a California based designer, manufacturer and assembler of Rigid-Flex and Flex printed circuit boards, announces the recent installation of a new CyberOptics SE500 solder paste inspection system. The SE500 will allow Lenthor to push inspection speeds to the highest level possible for even the most demanding assemblies without compromising on accuracy and...

Read More »
Company News

Lenthor Engineering (www.lenthor.com) Announces the Purchase of In Line AOI Component Inspection Equipment

Milpitas, California; Lenthor Engineering, a California based designer, manufacturer and assembler of RIGID-FLEX and FLEX printed circuit boards, announces the purchase of Mirtec’s MV-6 OMNI 3D AOI Series in line component inspection machine. The Mirtec MV-6 offers 15 mega pixel camera technology along with an advanced 8 phase color lighting system. “By providing this state-of-the-art...

Read More »
Company News

Lenthor Engineering (www.lenthor.com) Announces the Purchase of In Line AOI Component Inspection Equipment

Milpitas, California; Lenthor Engineering, a California based designer, manufacturer and assembler of RIGID-FLEX and FLEX printed circuit boards, announces the purchase of Mirtec’s MV-6 OMNI 3D AOI Series in line component inspection machine. The Mirtec MV-6 offers 15 mega pixel camera technology along with an advanced 8 phase color lighting system. “By providing this state-of-the-art...

Read More »
Lenthor Engineering (www.lenthor.com) Announces the Installation of Two ESI 5335 UV Laser Drilling Systems
Agricultural & Farming Products

Lenthor Engineering (www.lenthor.com) Announces the Installation of Two ESI 5335 UV Laser Drilling Systems

Milpitas, California –- Lenthor Engineering, a California based designer, manufacturer and assembler of RIGID-FLEX and FLEX printed circuit boards, announces the installation of two ESI 5335 UV Laser Drilling Systems.  This addition combines with Lenthor’s existing 5335 system as well as two 5330 systems. The 5335 incorporates ESI’s proprietary Third Dynamics technology.  With this...

Read More »
Lenthor Engineering (www.lenthor.com) Announces the Installation of Two ESI 5335 UV Laser Drilling Systems
Agricultural & Farming Products

Lenthor Engineering (www.lenthor.com) Announces the Installation of Two ESI 5335 UV Laser Drilling Systems

Milpitas, California –Â- Lenthor Engineering, a California based designer, manufacturer and assembler of RIGID-FLEX and FLEX printed circuit boards, announces the installation of two ESI 5335 UV Laser Drilling Systems.  This addition combines with Lenthor’s existing 5335 system as well as two 5330 systems. The 5335 incorporates ESI’s proprietary Third Dynamics technology. ...

Read More »

All Topics