Synqor
Boxborough, MA 01719
Share:
DC/DC Converter is offered in SIP package.
Non-isolated NiQorÃ-® series, with on-board input and output filtering, eliminates need for I/O capacitors. Point-of-load converter series has 3.0-3.6 V input range and delivers up to 15 A of current at 2.5, 1.8, 1.5, 1.2, and 0.9 V. Unit measures 2.0 x 0.55 x 0.335 in. and can be configured in vertical or horizontal orientations. Module employs synchronous rectification to achieve...
Read More »
Converter offers low profile with standard pin out.
PowerQorÃ-® Mega series eighth-brick sized isolated dc/dc converter delivers up to 15 A total output current at 3.3 V and below and 50 W at 5 V and above, without heatsink. The EML series has 48 V nominal input (35-75 V range) and meets input voltage transient requirements up to 100 V for 100 msec. Unit measures 0.9 x 2.3 x 0.37 in., occupies 60% of board space of standard quarter-brick, and...
Read More »
Bus Converter delivers 240 W in quarter-brick.
BusQor(TM) employs synchronous rectification and achieves 96.5% efficiency at full rated load. It accepts nominal 48 V input and delivers unregulated, stepped down voltage of 12 V with 2000 Vdc input-output isolation. Unit can deliver up to 20 A at 12 Vout for total of 240 W. Module includes input under-voltage lockout, output over-voltage shutdown, short-circuit protection, thermal shutdown and...
Read More »
DC to DC Converter measures 1.45 x 2.3 x 0.43 in.
DualQor(TM) series dual output voltage, quarter-brick sized isolated dc/dc converter delivers up to 60 W total output power at Ã-
Read More »
DC/DC Converters suit low voltage applications.
PowerQor(TM) Tera Series half-brick isolated DC/DC converters include output voltages of 15, 12, 5, 3.3, 2.5, 2.0, 1.8, 1.5 and 1.2 V. All units draw power from 48 V nominal input and deliver 60 amps or 165 watts output. Typical efficiency for 1.2 V module is 88% at half-load (30 A) and 84% at full load (60 A). It provides full 60 A of output current at up to 70 deg C, and 200 LFM airflow with no...
Read More »
DC/DC converter needs no heat sink.
Quarter-brick sized DualQor(TM) is capable of delivering up to 40 W of total output power at 3.3V and 2.5V. It employs synchronous rectification to achieve efficiencies up to 87%. Converter has 48V nominal input and meets input voltage transient requirements up to 100V for l00 msec. Unit has industry-standard footprint of 1.45 x 2.3 in. with profile of 0.43 in., and industry recognized pin out...
Read More »
DC/DC Converter works in low power applications.
QML series isolated dc/dc converter can deliver up to 15 A total output current at 3.3V and below and up to 75W at 5V and above without need for attached heatsink. It uses synchronous rectification, resulting in no derating of output power up to 70 degrees C. Converter employs industry standard quarter-brick footprint and pin out, measures 1.45 x 2.3 in., and has low profile of 8.5mm. Functions...
Read More »
DC/DC Converter is offered in SIP package.
Non-isolated NiQorÃ-® series, with on-board input and output filtering, eliminates need for I/O capacitors. Point-of-load converter series has 3.0-3.6 V input range and delivers up to 15 A of current at 2.5, 1.8, 1.5, 1.2, and 0.9 V. Unit measures 2.0 x 0.55 x 0.335 in. and can be configured in vertical or horizontal orientations. Module employs synchronous rectification to achieve...
Read More »
Converter offers low profile with standard pin out.
PowerQorÃ-® Mega series eighth-brick sized isolated dc/dc converter delivers up to 15 A total output current at 3.3 V and below and 50 W at 5 V and above, without heatsink. The EML series has 48 V nominal input (35-75 V range) and meets input voltage transient requirements up to 100 V for 100 msec. Unit measures 0.9 x 2.3 x 0.37 in., occupies 60% of board space of standard quarter-brick, and...
Read More »
Bus Converter delivers 240 W in quarter-brick.
BusQor(TM) employs synchronous rectification and achieves 96.5% efficiency at full rated load. It accepts nominal 48 V input and delivers unregulated, stepped down voltage of 12 V with 2000 Vdc input-output isolation. Unit can deliver up to 20 A at 12 Vout for total of 240 W. Module includes input under-voltage lockout, output over-voltage shutdown, short-circuit protection, thermal shutdown and...
Read More »
DC to DC Converter measures 1.45 x 2.3 x 0.43 in.
DualQor(TM) series dual output voltage, quarter-brick sized isolated dc/dc converter delivers up to 60 W total output power at Ã-
Read More »
DC/DC Converters suit low voltage applications.
PowerQor(TM) Tera Series half-brick isolated DC/DC converters include output voltages of 15, 12, 5, 3.3, 2.5, 2.0, 1.8, 1.5 and 1.2 V. All units draw power from 48 V nominal input and deliver 60 amps or 165 watts output. Typical efficiency for 1.2 V module is 88% at half-load (30 A) and 84% at full load (60 A). It provides full 60 A of output current at up to 70 deg C, and 200 LFM airflow with no...
Read More »
DC/DC converter needs no heat sink.
Quarter-brick sized DualQor(TM) is capable of delivering up to 40 W of total output power at 3.3V and 2.5V. It employs synchronous rectification to achieve efficiencies up to 87%. Converter has 48V nominal input and meets input voltage transient requirements up to 100V for l00 msec. Unit has industry-standard footprint of 1.45 x 2.3 in. with profile of 0.43 in., and industry recognized pin out...
Read More »
DC/DC Converter works in low power applications.
QML series isolated dc/dc converter can deliver up to 15 A total output current at 3.3V and below and up to 75W at 5V and above without need for attached heatsink. It uses synchronous rectification, resulting in no derating of output power up to 70 degrees C. Converter employs industry standard quarter-brick footprint and pin out, measures 1.45 x 2.3 in., and has low profile of 8.5mm. Functions...
Read More »