Gore, W. L., & Associates, Inc.
Newark, DE 19711
Share:
Tool Replacement Assemblies feature ergonomic design.
Offering direct replacement for Atlas Copco hand held devices, GORE(TM) DC Tool Replacement Assemblies survive random repetitive movemements. They withstand high tensile strength loads as well as torsional and tic-toc flexing within harsh environments.
Read More »
High Data Rate Cable Assembly works with ZD connectors.
Able to work with ZD backplane interface, GORE(TM) EYE-OPENERÃ-® ZD Cable Assembly combines digital cable assembly technology with ZD high-speed connector to offer interconnect that handles bandwidths 5 Gb/s and higher. It uses expanded PTFE as dielectric core for digital interconnect cable. Helically wrapped core ensures controlled electrical properties throughout signal path and provides...
Read More »Membrane Electrode Assembly suits automotive fuel cells.
GORE(TM) PRIMEAÃ-® Series 57 MEA (Membrane Electrode Assembly), suited for automotive PEM fuel cells, utilizes micro-reinforced membrane technology combined with gas diffusion technologies and material innovations. Components and associated technology enable product to withstand challenges of chemical degradation and voltage decay in harsh environments.
Read More »
EMI Shield snaps into place.
Multi-cavity, board-level snapSHOT(TM) is made of metallized, thermoformed plastic. It installs and removes easily and accommodates intricately shaped designs. Electrically insulated on inside, shield allows for significant thickness reduction over conventional shielding. Unit is attached to PCB panel using BGA spheres. Packaged in bulk, trays, and in tape and reel, shield can be installed using...
Read More »
Microwave Test Cables operate up to 65 GHz.
Internally ruggedized PHASEFLEX(TM) microwave coaxial assemblies combine electrical advantages of expanded PTFE dielectric with environmental protection. Cable has one in. minimum bend radius without affecting the cable performance, and has virtually no springback. Assemblies are suitable for production test applications, locations where test area is not in vicinity of equipment, or vector...
Read More »
Flange Gaskets seal under low pressures.
TriGuard(TM) gaskets provide positive sealing in fluid piping on fragile flanges or flanges with irregularities, where bolt torque and gasket compression stress must be limited. Expanded PTFE material combines sealing characteristics of elastomers with temperature and chemical resistance of PTFE. Gas-tight sealing can be achieved at 250 psi. They are available in 1/2 to 28 in. ANSI ring and full...
Read More »
Test Assemblies range from DC to 65 GHz.
PHASEFLEXÃ-® Assemblies are crush-, torque-, kink-, and fluid-resistant. They are also dust- and dirt-proof with ergonomic/ruggedized boot strain reliefs. Standard connectors include SMA, TNC/PTNC, Type N/Precision N, 7 mm, 7-16, 3.5 mm, 2.92 mm (K style), 2.4 mm, 1.85 mm (V style). Assemblies are suitable for production testing, antenna range testing, thermal vacuum chambers, and remote...
Read More »
Dielectrics offer low loss characteristics for RF modules.
MICROLAMÃ-® 610 dielectric minimizes dielectric cracking and provides PCB mechanical reliability. Reinforced microvia material consists of FR-4 epoxy resin and continuous toughening matrix. MICROLAMÃ-® 620 dielectric suits chip package substrates. It consists of thermoset resin in reinforcing matrix with moisture resistance and mechanical reliability. MICROLAMÃ-® 630 dielectric...
Read More »Cables incorporate Corning's multimode fibers.
FLEX-LITE(TM) fiber optic cables are designed for use with nLIGHTEN(TM) multi-channel optical transmitter and receiver modules. 12-channel VCSEL-based parallel optical links offer bandwidth-density. InfiniCor fibers are suited to support high bandwidth requirement of modules. nLIGHTEN 1.25 Gbps parallel fiber optic modules offer 15 Gbps aggregate bandwidth using less than 20 mm of board width....
Read More »New Gore White Paper Explains the Complexities of Selecting the Right Cable System for Signal Integrity and Durability/2010
LANDENBERG, PA, AUGUST 12, 2010 - A new white paper from W. L. Gore & Associates, Inc., presents a systematic approach that design engineers can follow to ensure that a cable system will provide reliable performance in demanding environments and mission-critical applications. According to author Paul Warren, W. L. Gore & Associates' Lead Design Engineer, cable reliability is based on both...
Read More »W. L. Gore & Associates Marks 12th Year as One of Nation's Best
Company Earns #15 Position on FORTUNE'S 2009 100 Best Companies to Work For List Newark, DE (January 22, 2009)-W. L. Gore & Associates, Inc., maker of GORE-TEXÃ-® fabric and thousands of other innovative products, today announced it has earned a position on FORTUNE magazine's annual list of the 100 Best Companies to Work For for the 12th consecutive year. Gore is ranked No. 15. The full list...
Read More »
Tool Replacement Assemblies feature ergonomic design.
Offering direct replacement for Atlas Copco hand held devices, GORE(TM) DC Tool Replacement Assemblies survive random repetitive movemements. They withstand high tensile strength loads as well as torsional and tic-toc flexing within harsh environments.
Read More »
High Data Rate Cable Assembly works with ZD connectors.
Able to work with ZD backplane interface, GORE(TM) EYE-OPENERÃ-® ZD Cable Assembly combines digital cable assembly technology with ZD high-speed connector to offer interconnect that handles bandwidths 5 Gb/s and higher. It uses expanded PTFE as dielectric core for digital interconnect cable. Helically wrapped core ensures controlled electrical properties throughout signal path and provides...
Read More »Membrane Electrode Assembly suits automotive fuel cells.
GORE(TM) PRIMEAÃ-® Series 57 MEA (Membrane Electrode Assembly), suited for automotive PEM fuel cells, utilizes micro-reinforced membrane technology combined with gas diffusion technologies and material innovations. Components and associated technology enable product to withstand challenges of chemical degradation and voltage decay in harsh environments.
Read More »
EMI Shield snaps into place.
Multi-cavity, board-level snapSHOT(TM) is made of metallized, thermoformed plastic. It installs and removes easily and accommodates intricately shaped designs. Electrically insulated on inside, shield allows for significant thickness reduction over conventional shielding. Unit is attached to PCB panel using BGA spheres. Packaged in bulk, trays, and in tape and reel, shield can be installed using...
Read More »
Microwave Test Cables operate up to 65 GHz.
Internally ruggedized PHASEFLEX(TM) microwave coaxial assemblies combine electrical advantages of expanded PTFE dielectric with environmental protection. Cable has one in. minimum bend radius without affecting the cable performance, and has virtually no springback. Assemblies are suitable for production test applications, locations where test area is not in vicinity of equipment, or vector...
Read More »
Flange Gaskets seal under low pressures.
TriGuard(TM) gaskets provide positive sealing in fluid piping on fragile flanges or flanges with irregularities, where bolt torque and gasket compression stress must be limited. Expanded PTFE material combines sealing characteristics of elastomers with temperature and chemical resistance of PTFE. Gas-tight sealing can be achieved at 250 psi. They are available in 1/2 to 28 in. ANSI ring and full...
Read More »
Test Assemblies range from DC to 65 GHz.
PHASEFLEXÃ-® Assemblies are crush-, torque-, kink-, and fluid-resistant. They are also dust- and dirt-proof with ergonomic/ruggedized boot strain reliefs. Standard connectors include SMA, TNC/PTNC, Type N/Precision N, 7 mm, 7-16, 3.5 mm, 2.92 mm (K style), 2.4 mm, 1.85 mm (V style). Assemblies are suitable for production testing, antenna range testing, thermal vacuum chambers, and remote...
Read More »
Dielectrics offer low loss characteristics for RF modules.
MICROLAMÃ-® 610 dielectric minimizes dielectric cracking and provides PCB mechanical reliability. Reinforced microvia material consists of FR-4 epoxy resin and continuous toughening matrix. MICROLAMÃ-® 620 dielectric suits chip package substrates. It consists of thermoset resin in reinforcing matrix with moisture resistance and mechanical reliability. MICROLAMÃ-® 630 dielectric...
Read More »