Tundra Semiconductor Corp.
Nepean, ON K2K2M5 CAN
Share:
Tundra Semiconductor Collaborates with Leading Wireless Infrastructure Company to Broaden MicroTCA Ecosystem
Tundra Licenses Ericsson's MicroTCA Carrier Hub Switching Sub System, Enabled by Serial RapidIO OTTAWA, May 29 / -- Tundra Semiconductor Corporation, the leader in System Interconnect, today announced a collaboration with Ericsson, the leading wireless infrastructure provider, to license the Switching Module of a MicroTCA Carrier Hub (MCH) card, designed by Ericsson with Tundra's Tsi578(TM)...
Read More »PCI-to-PCI Bridge supports 4 PCI bus master devices.
Available in 128-pin, 23 x 17 mm PQFP package, small-form-factor Model Tsi340(TM) targets new and existing board footprints that use 32-bit, 66 MHz PCI-to-PCI bridges. Device is 3.3 V I/O and 5 V tolerant, and fully compliant with PCI Local Bus Specification Revision 2.3. It is suited for communications and network equipment, video capture cards, embedded video recorders, multi-function printers,...
Read More »Development Platform delivers RapidIO design support tools.
Tsi578Serial RapidIO Development Platform (SRDP) gives designers ability to rapidly prototype and test interoperability using Tsi578 Serial RapidIO Switch in broad spectrum of wireless, video, communications, and military products. SRDP's flexibility allows designers to partition system architecture and utilize Tundra Serial RapidIO switch to optimize data flow between DSPs, microprocessors,...
Read More »PCI-to-PCI Bridge has dual 32-bit, 66 MHz interfaces.
Produced in 31 x 31 mm, 208 PQFP and 256 PBGA packages, Tundra Tsi350(TM) is drop-in, pin-for-pin and software compatible with industry-standard PCI bridges. Device has sufficient clock and arbitration pins to directly support up to 9 PCI bus masters on secondary interface and offers 10 independent secondary clock outputs to secondary slots. Primary and secondary interfaces can be operated using...
Read More »Switch integrates RapidIO-® in ATCA/MicroTCA architectures.
Based on Serial RapidIO Specification v1.3, Model Tsi578(TM) interconnects Serial RapidIO-enabled processors and peripheral devices, supporting aggregate bandwidth of 80 Gbits/s. It provides up to eight 4x mode ports or sixteen 1x mode ports, each configurable to 1.25, 2.5, or 3.125 Gbit/s. Switch can route packets to over 64,000 endpoints, independent unicast and multicast routing mechanisms,...
Read More »Host Bridge for PowerPC-® offers optimal I/O connectivity.
Used to interconnect PowerPC processors with subsystems in embedded designs, Tundra Tsi110(TM) integrates communications peripherals such as two 4-lane PCI-Express ports, 4 Gigabit Ethernet (GigE) ports, and one PCI-X port. GigE hardware acceleration off-loads host processor and allows all GigE ports to run at full line rate for data plane applications. Software-compatible with Tsi109 and Tsi108,...
Read More »RapidIO Switch provides embedded system interconnect.
Using 0.13 micron technology and integrated SerDes functionality, Tsi568A(TM) Serial RapidIO Switch provides chip-to-chip interconnect between I/O devices. Supporting aggregate bandwidth of 80 gigabits/sec, unit can be configured for up to eight 4x links or 16 1x links. It offers low latency and cut through, prevention of head-of-line blocking, CRC handling for hardware-based error recovery, and...
Read More »Tundra Semiconductor Signs Product Acquisition Agreement
Tundra Announces First Step in Smart Interconnect Solutions Strategy OTTAWA, Aug. 16 -- Tundra Semiconductor Corporation (TSX:TUN), a leader in System Interconnect, signed an agreement today to acquire a new product from a leading global solutions and engineering services provider. The agreement is a significant first step in executing Tundra's previously announced smart interconnect solutions...
Read More »Tundra Semiconductor Collaborates with Leading Wireless Infrastructure Company to Broaden MicroTCA Ecosystem
Tundra Licenses Ericsson's MicroTCA Carrier Hub Switching Sub System, Enabled by Serial RapidIO OTTAWA, May 29 / -- Tundra Semiconductor Corporation, the leader in System Interconnect, today announced a collaboration with Ericsson, the leading wireless infrastructure provider, to license the Switching Module of a MicroTCA Carrier Hub (MCH) card, designed by Ericsson with Tundra's Tsi578(TM)...
Read More »PCI-to-PCI Bridge supports 4 PCI bus master devices.
Available in 128-pin, 23 x 17 mm PQFP package, small-form-factor Model Tsi340(TM) targets new and existing board footprints that use 32-bit, 66 MHz PCI-to-PCI bridges. Device is 3.3 V I/O and 5 V tolerant, and fully compliant with PCI Local Bus Specification Revision 2.3. It is suited for communications and network equipment, video capture cards, embedded video recorders, multi-function printers,...
Read More »RIOLAB(TM) Offers RapidIO(R) Device Interoperability Level-3 (DIL-3) Testing
OTTAWA, Nov. 8 /PRNewswire-FirstCall/ -- RIOLAB(TM) Corporation, the world's first RapidIO Interoperability testing facility, now offers Device Interoperability Level 3 (DIL-3) testing, rounding out its suite of tests designed to demonstrate full device interoperability for RapidIOÃ-®-based devices. DIL-3 is the final level of interoperability testing, and tests interoperability between...
Read More »Development Platform delivers RapidIO design support tools.
Tsi578Serial RapidIO Development Platform (SRDP) gives designers ability to rapidly prototype and test interoperability using Tsi578 Serial RapidIO Switch in broad spectrum of wireless, video, communications, and military products. SRDP's flexibility allows designers to partition system architecture and utilize Tundra Serial RapidIO switch to optimize data flow between DSPs, microprocessors,...
Read More »PCI-to-PCI Bridge has dual 32-bit, 66 MHz interfaces.
Produced in 31 x 31 mm, 208 PQFP and 256 PBGA packages, Tundra Tsi350(TM) is drop-in, pin-for-pin and software compatible with industry-standard PCI bridges. Device has sufficient clock and arbitration pins to directly support up to 9 PCI bus masters on secondary interface and offers 10 independent secondary clock outputs to secondary slots. Primary and secondary interfaces can be operated using...
Read More »Switch integrates RapidIO-® in ATCA/MicroTCA architectures.
Based on Serial RapidIO Specification v1.3, Model Tsi578(TM) interconnects Serial RapidIO-enabled processors and peripheral devices, supporting aggregate bandwidth of 80 Gbits/s. It provides up to eight 4x mode ports or sixteen 1x mode ports, each configurable to 1.25, 2.5, or 3.125 Gbit/s. Switch can route packets to over 64,000 endpoints, independent unicast and multicast routing mechanisms,...
Read More »Host Bridge for PowerPC-® offers optimal I/O connectivity.
Used to interconnect PowerPC processors with subsystems in embedded designs, Tundra Tsi110(TM) integrates communications peripherals such as two 4-lane PCI-Express ports, 4 Gigabit Ethernet (GigE) ports, and one PCI-X port. GigE hardware acceleration off-loads host processor and allows all GigE ports to run at full line rate for data plane applications. Software-compatible with Tsi109 and Tsi108,...
Read More »RapidIO Switch provides embedded system interconnect.
Using 0.13 micron technology and integrated SerDes functionality, Tsi568A(TM) Serial RapidIO Switch provides chip-to-chip interconnect between I/O devices. Supporting aggregate bandwidth of 80 gigabits/sec, unit can be configured for up to eight 4x links or 16 1x links. It offers low latency and cut through, prevention of head-of-line blocking, CRC handling for hardware-based error recovery, and...
Read More »