RJG, Inc.
Traverse City, MI 49686
New Cavity Pressure Sensor is Ideal for High Cavitation Molds with Small and Tightly Packed Ejector Pins
Feature 6 mm diameter and height, flexible, order-to-length cables and not susceptible to moisture or contamination. Available in 50 and 250 pounds for use with ejector pins up to 1/8-inch (3 mm) and up to ¼ inch (6 mm) diameter respectively. Allows injection molders to connect up to eight strain gage sensors.
Read More »RJG, Inc. Now Offering Its Systematic Molding Courses via New Interactive Virtual Classrooms
Recognizing that its customers were finding it increasingly difficult to budget travel for training or free up valuable employee time with staffing that is already lean, RJG is now offering its Injection Molding Essentials and Systematic Molding I courses over the internet. More courses are planned for a future release. We are able to deliver a classroom experience that includes a wealth of...
Read More »
Modules interface with sensors, diverters, and sequencers.
Used with eDART(TM) process controller, Lynx Surface Mount Modules feature EMI/ESD sealed enclosures and shielded industrial connectors. Analog Input Module, IA1-S-VI-24 can be used to interface with temperature, dew point, pressure, and other remote sensors, while OR2-S Dual Relay Output Module supplies signals to parts diverters, valve gate controllers, and machine input cards. With isolated...
Read More »
Lynx Mold Mount Piezo Adapter
RJG announces the release of the Lynx Mold Mount Piezo Adapter. The Lynx Mold Mount Piezo Adapter can be used to interface the eDART System(TM) with all major manufacturers' piezoelectric sensors. By mounting to the mold, customers avoid the use of costly extension cables and reduce the opportunity for connector contamination (a major source of problems with piezoelectric sensors). The potential...
Read More »Email Notification Software monitors plant-wide operations.
InsightAlert notifies users when their machines are not operating within optimal parameters, enabling efficient response to problems. Based on user preferences, email notifications are sent when all or any combination of specific events occur on monitored machines. Such events can include machine downtime during run, creation of reject parts, and creation of suspect parts. Users can filter out...
Read More »Process Control System provides automated part containment.
Offering entry-level system for molders, eDART flx includes automatic sensor recognition and scaling, auto-zeroing of cavity pressure sensors, and automatic job selection. It can detect processing issues such as short shots or flash before mold opens, allowing user to set up containment procedures for failsafe part segregation. With eDART flx, molding problems can be analyzed by interpreting...
Read More »Terminal Block Module accepts up to 4 thermocouple inputs.
Interfacing between thermocouple temperature sensors and eDART System(TM), Lynx Quad Temperature Module enables eDART to monitor mold, machine, and auxiliary equipment conditions using temperature. Unit converts signals from analog to digital and is available for Type J or Type K thermocouples. Some applications that can be monitored include barrel/mold/nozzle temperature, coolant, and dryer...
Read More »
Mold Identifier facilitates job startup.
Model ID/LX1-S Mold Identifier allows un-instrumented molds to utilize identifying and job startup features of company's eDART System(TM). Device mounts on moving or stationary mold half and recognizes each mold as it is placed in machine. Identifier gets power and communications through micro connector, which interfaces unit with eDART System to automatically load correct setup information...
Read More »
Differential Pressure Sensor facilitates part molding.
Machine or mold mount, Lynx Delta LS-DP-100 is used with eDART System(TM) to measure difference in coolant pressure between mold inlet and outlet. Alarms can be set, allowing user to detect abnormalities in cooling lines, ranging from small blockage to complete line failure.
Read More »Software alerts users of tool/machinery maintenance issues.
Windows-based InsightPM tracks tool repair histories, labor, and material costs. It is compatible with proprietary real-time production system, or independent spreadsheet can be prepared that feeds application using similar ASCII file format. Preventative maintenance can be scheduled by hours or dates run, and up to 10 tasks can be tracked for each tool or machine. Software generates work orders...
Read More »
New Cavity Pressure Sensor is Ideal for High Cavitation Molds with Small and Tightly Packed Ejector Pins
Feature 6 mm diameter and height, flexible, order-to-length cables and not susceptible to moisture or contamination. Available in 50 and 250 pounds for use with ejector pins up to 1/8-inch (3 mm) and up to ¼ inch (6 mm) diameter respectively. Allows injection molders to connect up to eight strain gage sensors.
Read More »RJG Now Offers Self-Paced eLearning Math for Molders Course
Traverse City, MI: In September of this year, RJG launched their first ever eLearning course, Math for Molders. Math for Molders provides foundational math skills practice needed both in the field and for more advanced RJG courses. This online eLearning course allows students to complete each module at their own pace, including the option to replay sections as needed, and takes an average of nine...
Read More »RJG, Inc. Now Offering Its Systematic Molding Courses via New Interactive Virtual Classrooms
Recognizing that its customers were finding it increasingly difficult to budget travel for training or free up valuable employee time with staffing that is already lean, RJG is now offering its Injection Molding Essentials and Systematic Molding I courses over the internet. More courses are planned for a future release. We are able to deliver a classroom experience that includes a wealth of...
Read More »RJG, Inc. Restructures and Relocates in Singapore
RJG, Inc., having experienced strong growth in the Asia Pacific market in the past five years operating as RJG Plastechnic Asia Pte., Ltd. in Singapore, has restructured and relocated its offices in order to create an infrastructure to support continued growth in the future. RJG (S.E.A.) Pte, Ltd. is the new name and the business is now located at Genting Lane #05-02A, Genting Building, Singapore...
Read More »RJG, Inc. Opens RJG France!
Matt Groleau, President of RJG, put ink to the final paperwork in the creation of RJG France. This new regional office will be located in the Maison des Entreprises building at 180 rue Pierre & Marie Curie, 01100 Bellignat, Oyonnax, France, about 40 minutes East of Lyon. This area, known as The Plastics Valley, has a high concentration of plastics tooling, manufacturing, auxiliaries, and...
Read More »
Modules interface with sensors, diverters, and sequencers.
Used with eDART(TM) process controller, Lynx Surface Mount Modules feature EMI/ESD sealed enclosures and shielded industrial connectors. Analog Input Module, IA1-S-VI-24 can be used to interface with temperature, dew point, pressure, and other remote sensors, while OR2-S Dual Relay Output Module supplies signals to parts diverters, valve gate controllers, and machine input cards. With isolated...
Read More »El Paso Community College now Offers RJG Training Courses
RJG, Inc. and El Paso Community College are partnering to offer RJG's nationally recognized training programs to plastics processors in the South Central region. Chris Salazar has been hired by RJG as a bi-lingual consultant/trainer in El Paso. This will enable the expansion of training offered to the area and allow easier access to area processors for advanced level RJG training. The El Paso...
Read More »
Lynx Mold Mount Piezo Adapter
RJG announces the release of the Lynx Mold Mount Piezo Adapter. The Lynx Mold Mount Piezo Adapter can be used to interface the eDART System(TM) with all major manufacturers' piezoelectric sensors. By mounting to the mold, customers avoid the use of costly extension cables and reduce the opportunity for connector contamination (a major source of problems with piezoelectric sensors). The potential...
Read More »Email Notification Software monitors plant-wide operations.
InsightAlert notifies users when their machines are not operating within optimal parameters, enabling efficient response to problems. Based on user preferences, email notifications are sent when all or any combination of specific events occur on monitored machines. Such events can include machine downtime during run, creation of reject parts, and creation of suspect parts. Users can filter out...
Read More »Process Control System provides automated part containment.
Offering entry-level system for molders, eDART flx includes automatic sensor recognition and scaling, auto-zeroing of cavity pressure sensors, and automatic job selection. It can detect processing issues such as short shots or flash before mold opens, allowing user to set up containment procedures for failsafe part segregation. With eDART flx, molding problems can be analyzed by interpreting...
Read More »