Palintest Ltd.
Suite F
Golden, CO 80401
Waterproof Photometer provides on-site testing.
Using light to measure color changes in samples treated with reagent, portable Model 7100 enables advanced instrumental analysis of extensive range of water tests. It is accurate to Ã-
Read More »
Handheld Meter measures chlorine over 0-200 mg/L range.
Chlorometer Duo measures all water distribution system chlorine levels. Calibrated to monitor residual chlorine using DPD standard method, unit reveals free and total chlorine in 0-5 mg/L range with resolution of 0.01 mg/L. Higher range test uses iodine release technique for total chlorine analysis with 1 mg/liter resolution. Each test takes 1 min, and results are displayed on 10 mm high LCD...
Read More »
Meter facilitates testing of molybdate formulations.
Used as corrosion inhibitor in industrial water treatment, battery-powered Molybdate Duo Meter features pushbutton measurement functionality and incorporates 10 mm LCD display and automatic switch-off. It tests concentration levels from 0-100 mg/l MoO4 as well as trace amounts as low as 0.10 ppm in 0-20 mg/l MoO4 range. Splash-proof unit, suited for bench or field use, is supplied as complete...
Read More »
Test Kit monitors quality of treated wastewater.
Model SP304 includes all tests required to ensure that final effluents meet discharge consent limits. Using 0-30 PV (Permanganate Value) test, kit assesses general quality of final effluents and their suitability for discharge. Turbidity and suspended solids are measured visually using 2 inspection tubes, and 4-8 pH test highlights acidic or alkaline trade wastes. Kit comes with all necessary...
Read More »
Ferrometer is suitable for laboratory or field use.
Featuring single-button operation, hand-held, splashproof Ferrometer 1000 uses industry standard 1,10 phenanthroline test and is capable of dissolving colloidal and particulate iron. It accurately tests iron in range of 0-5.00 mg/l with resolution of 0.01 mg/l and produces reading on 10 mm LCD. Powered by two 1.5 V batteries, unit features automatic switch-off and is supplied as complete test kit...
Read More »
Hand-Held Meter test bromine/chlorine levels in water.
Splashproof Bromometer Duo uses DPD chlorine and bromine test methods to check on disinfection and sterilization levels. Powered by two 1.5 V batteries, product features automatic switch-off and is supplied with carry case, reagents, and test tubes. Single-button operation results in reading displayed on 10 mm LCD screen. Using proprietary reagents, it tests bromine in 0-10 mg/l range and...
Read More »
Photometer guides user through procedures.
Photometer 8000 offers rapid start up, fast blanking and reading, and optics system with automatic wavelength selection and test recognition. Backlit touch-screen display provides menu-driven user interface, while on-screen prompts guide users through measurement and test procedures, eliminating need to use handbook. Up to 1,000 test results can be logged with record of time, date, and sample...
Read More »
Tester monitors organo-phosphonate levels.
OP Test is designed for use in boiler and cooling water systems. Using tablet containing pH buffer and screened indicator, test eliminates problems of pH adjustment and end-point determination associated with traditional tests. Screened indicator produces color change from green to purple as drop of thorium nitrate is added. Microburette for adding thorium nitrate is directly calibrated to OP...
Read More »
Conductivity Meter measures over wide range.
Micro 500, with auto-ranging capability, measures from 0 to 199.9 microsiemens per cm, 0 to 1999 microsiemens per cm, and 0 to 19.99 millisiemens per cm. It is accurate to +/-1% FS. This allows it to be used for applications ranging from testing deionized water to brine, routine monitoring of demineralization and other high purity water treatment operations, and obtaining solution conductivity...
Read More »
Waterproof Photometer provides on-site testing.
Using light to measure color changes in samples treated with reagent, portable Model 7100 enables advanced instrumental analysis of extensive range of water tests. It is accurate to Ã-
Read More »
Handheld Meter measures chlorine over 0-200 mg/L range.
Chlorometer Duo measures all water distribution system chlorine levels. Calibrated to monitor residual chlorine using DPD standard method, unit reveals free and total chlorine in 0-5 mg/L range with resolution of 0.01 mg/L. Higher range test uses iodine release technique for total chlorine analysis with 1 mg/liter resolution. Each test takes 1 min, and results are displayed on 10 mm high LCD...
Read More »
Meter facilitates testing of molybdate formulations.
Used as corrosion inhibitor in industrial water treatment, battery-powered Molybdate Duo Meter features pushbutton measurement functionality and incorporates 10 mm LCD display and automatic switch-off. It tests concentration levels from 0-100 mg/l MoO4 as well as trace amounts as low as 0.10 ppm in 0-20 mg/l MoO4 range. Splash-proof unit, suited for bench or field use, is supplied as complete...
Read More »
Test Kit monitors quality of treated wastewater.
Model SP304 includes all tests required to ensure that final effluents meet discharge consent limits. Using 0-30 PV (Permanganate Value) test, kit assesses general quality of final effluents and their suitability for discharge. Turbidity and suspended solids are measured visually using 2 inspection tubes, and 4-8 pH test highlights acidic or alkaline trade wastes. Kit comes with all necessary...
Read More »
Ferrometer is suitable for laboratory or field use.
Featuring single-button operation, hand-held, splashproof Ferrometer 1000 uses industry standard 1,10 phenanthroline test and is capable of dissolving colloidal and particulate iron. It accurately tests iron in range of 0-5.00 mg/l with resolution of 0.01 mg/l and produces reading on 10 mm LCD. Powered by two 1.5 V batteries, unit features automatic switch-off and is supplied as complete test kit...
Read More »
Hand-Held Meter test bromine/chlorine levels in water.
Splashproof Bromometer Duo uses DPD chlorine and bromine test methods to check on disinfection and sterilization levels. Powered by two 1.5 V batteries, product features automatic switch-off and is supplied with carry case, reagents, and test tubes. Single-button operation results in reading displayed on 10 mm LCD screen. Using proprietary reagents, it tests bromine in 0-10 mg/l range and...
Read More »
Photometer guides user through procedures.
Photometer 8000 offers rapid start up, fast blanking and reading, and optics system with automatic wavelength selection and test recognition. Backlit touch-screen display provides menu-driven user interface, while on-screen prompts guide users through measurement and test procedures, eliminating need to use handbook. Up to 1,000 test results can be logged with record of time, date, and sample...
Read More »
Tester monitors organo-phosphonate levels.
OP Test is designed for use in boiler and cooling water systems. Using tablet containing pH buffer and screened indicator, test eliminates problems of pH adjustment and end-point determination associated with traditional tests. Screened indicator produces color change from green to purple as drop of thorium nitrate is added. Microburette for adding thorium nitrate is directly calibrated to OP...
Read More »
Conductivity Meter measures over wide range.
Micro 500, with auto-ranging capability, measures from 0 to 199.9 microsiemens per cm, 0 to 1999 microsiemens per cm, and 0 to 19.99 millisiemens per cm. It is accurate to +/-1% FS. This allows it to be used for applications ranging from testing deionized water to brine, routine monitoring of demineralization and other high purity water treatment operations, and obtaining solution conductivity...
Read More »