CAMI Research Inc.
Suite 115
Acton, MA 01720-6346
Latest M3Z Multi-Conductor Cable Tester Determines Connectivity in Cables and Wire Harnesses
Features remote control socket to be used for either an optional external footswitch or for a custom remote control to extend panel indicators and test button, and an accessory socket for a probe or minihook connectors. Includes comprehensive software to select one particular wire connection in a cable and make continuous resistance measurements at up to 10 cycles per second. Control module has...
Read More »Latest M3Z Multi-Conductor Cable Tester Determines Connectivity in Cables and Wire Harnesses
Features remote control socket to be used for either an optional external footswitch or for a custom remote control to extend panel indicators and test button, and an accessory socket for a probe or minihook connectors. Includes comprehensive software to select one particular wire connection in a cable and make continuous resistance measurements at up to 10 cycles per second. Control module has...
Read More »New CB56 Test Interface Board is Rated to 1500Vac/dc
Offers 6 positions for Phoenix Contact connectors or any other connector with 0.14 in. (3.5 mm.) pin pitch. Preconfigured for Phoenix Contact connectors with graphic and pin map. Unit is automatically detected and rendered on the screen together with the wiring.
Read More »New CB56 Test Interface Board is Rated to 1500Vac/dc
Offers 6 positions for Phoenix Contact connectors or any other connector with 0.14 in. (3.5 mm.) pin pitch. Preconfigured for Phoenix Contact connectors with graphic and pin map. Unit is automatically detected and rendered on the screen together with the wiring.
Read More »New ZIF Light Director Fixtures Increases Accuracy and Assembly Rate While Eliminating Errors
Computer-guided technique for assembling connectors used in aerospace, medical and other high-reliability applications. Uses LED-lit fibers to individually illuminate target cavities in the connector being assembled. Allows rapid connection and disconnection of the connector being assembled to achieve high productivity.
Read More »New ZIF Light Director Fixtures Increases Accuracy and Assembly Rate While Eliminating Errors
Computer-guided technique for assembling connectors used in aerospace, medical and other high-reliability applications. Uses LED-lit fibers to individually illuminate target cavities in the connector being assembled. Allows rapid connection and disconnection of the connector being assembled to achieve high productivity.
Read More »New CB55 Test Interface boards from CAMI Research are Suitable for All CableEye Tester Models
Used for surface mount single and dual row connectors with 0.05” (1.27mm) pitch and up to 34 and 68 pins respectively. Rated to 500Vac/dc and connectors under test are instantly, automatically detected and rendered on the screen together with the wiring. Available in set of two boards, each paired with other CableEye adapter boards to accommodate any combination of connectors.
Read More »New CB55 Test Interface boards from CAMI Research are Suitable for All CableEye Tester Models
Used for surface mount single and dual row connectors with 0.05” (1.27mm) pitch and up to 34 and 68 pins respectively. Rated to 500Vac/dc and connectors under test are instantly, automatically detected and rendered on the screen together with the wiring. Available in set of two boards, each paired with other CableEye adapter boards to accommodate any combination of connectors.
Read More »Latest CableEye Automation-Ready Cable and Harness Testers Automatically Displays a Graphic of Connectors and Wires under Test
Designed for assembly, prototyping, productions and QC of wire cables and harnesses in transportation, energy, medical devices, defense applications. Embedded with software package that offers test functions, graphic wiring display, connectors database, reporting, data logging and automation scripting features. Generates image-rich work instructions to reduce operator mistakes during test set-up.
Read More »Latest CableEye Automation-Ready Cable and Harness Testers Automatically Displays a Graphic of Connectors and Wires under Test
Designed for assembly, prototyping, productions and QC of wire cables and harnesses in transportation, energy, medical devices, defense applications. Embedded with software package that offers test functions, graphic wiring display, connectors database, reporting, data logging and automation scripting features. Generates image-rich work instructions to reduce operator mistakes during test set-up.
Read More »Latest M3Z Multi-Conductor Cable Tester Determines Connectivity in Cables and Wire Harnesses
Features remote control socket to be used for either an optional external footswitch or for a custom remote control to extend panel indicators and test button, and an accessory socket for a probe or minihook connectors. Includes comprehensive software to select one particular wire connection in a cable and make continuous resistance measurements at up to 10 cycles per second. Control module has...
Read More »Latest M3Z Multi-Conductor Cable Tester Determines Connectivity in Cables and Wire Harnesses
Features remote control socket to be used for either an optional external footswitch or for a custom remote control to extend panel indicators and test button, and an accessory socket for a probe or minihook connectors. Includes comprehensive software to select one particular wire connection in a cable and make continuous resistance measurements at up to 10 cycles per second. Control module has...
Read More »New CB56 Test Interface Board is Rated to 1500Vac/dc
Offers 6 positions for Phoenix Contact connectors or any other connector with 0.14 in. (3.5 mm.) pin pitch. Preconfigured for Phoenix Contact connectors with graphic and pin map. Unit is automatically detected and rendered on the screen together with the wiring.
Read More »New CB56 Test Interface Board is Rated to 1500Vac/dc
Offers 6 positions for Phoenix Contact connectors or any other connector with 0.14 in. (3.5 mm.) pin pitch. Preconfigured for Phoenix Contact connectors with graphic and pin map. Unit is automatically detected and rendered on the screen together with the wiring.
Read More »New ZIF Light Director Fixtures Increases Accuracy and Assembly Rate While Eliminating Errors
Computer-guided technique for assembling connectors used in aerospace, medical and other high-reliability applications. Uses LED-lit fibers to individually illuminate target cavities in the connector being assembled. Allows rapid connection and disconnection of the connector being assembled to achieve high productivity.
Read More »New ZIF Light Director Fixtures Increases Accuracy and Assembly Rate While Eliminating Errors
Computer-guided technique for assembling connectors used in aerospace, medical and other high-reliability applications. Uses LED-lit fibers to individually illuminate target cavities in the connector being assembled. Allows rapid connection and disconnection of the connector being assembled to achieve high productivity.
Read More »CAMI Research and Doyle Manufacturing Announce Integration Partnership Providing Low Insertion Force, Plug and Play, CableEye Test Interface Fixtures
CAMI Research Inc. (Acton, MA) and Doyle Manufacturing Inc. (Bristol, IN), have joined forces to offer the design and manufacture of low insertion force, CableEye® test interface fixtures providing CableEye users with full plug and play solutions – mapped, electrically tested, and ready to use. The Partners CAMI manufactures CableEye, a highly versatile, expandable and upgradable, diagnostic...
Read More »CAMI Research and Doyle Manufacturing Announce Integration Partnership Providing Low Insertion Force, Plug and Play, CableEye Test Interface Fixtures
CAMI Research Inc. (Acton, MA) and Doyle Manufacturing Inc. (Bristol, IN), have joined forces to offer the design and manufacture of low insertion force, CableEye® test interface fixtures providing CableEye users with full plug and play solutions – mapped, electrically tested, and ready to use. The Partners CAMI manufactures CableEye, a highly versatile, expandable and upgradable, diagnostic...
Read More »New CB55 Test Interface boards from CAMI Research are Suitable for All CableEye Tester Models
Used for surface mount single and dual row connectors with 0.05” (1.27mm) pitch and up to 34 and 68 pins respectively. Rated to 500Vac/dc and connectors under test are instantly, automatically detected and rendered on the screen together with the wiring. Available in set of two boards, each paired with other CableEye adapter boards to accommodate any combination of connectors.
Read More »New CB55 Test Interface boards from CAMI Research are Suitable for All CableEye Tester Models
Used for surface mount single and dual row connectors with 0.05” (1.27mm) pitch and up to 34 and 68 pins respectively. Rated to 500Vac/dc and connectors under test are instantly, automatically detected and rendered on the screen together with the wiring. Available in set of two boards, each paired with other CableEye adapter boards to accommodate any combination of connectors.
Read More »