AMETEK Dynamic Fluid Solutions
Kent, OH 44240
Brush-Commutated DC Motors provide quiet operation.
Designed with 2-pole stators, PITTMANÃ-® Series 9000 incorporates 7-slot skewed armatures to minimize magnetic cogging and enable smooth, quiet-running operation. Commutators are diamond turned after armature assembly to ensure concentricity, while windings are resin-impregnated for reliability in incremental motion applications. Offered in 6 lengths from 1.82-3.35 in., motors can achieve max...
Read More »
Brushless dc Blowers achieve max flow rates up to 190 cfm.
Offered in bypass and thru-flow versions, variable-speed WindjammerÃ-® Blowers accept line voltage up to 72 Vdc, depending on model. Units provide output pressure up to 97.7 in. H2O and are virtually maintenance free. Speed can be adjusted internally with onboard potentiometer, external PWM, or dc control. Measuring 5.7 in. dia, low-noise blowers are suitable for medical and industrial...
Read More »
Brushless DC Motors provide continuous torque to 40 oz-in.
ELCOM STÃ-® Series N2300 slotted brushless DC motors incorporate internal Hall sensor feedback for linear speed-torque characteristics, and variable speed control with control electronics. Motor features 6-slot lamination design and mount configuration that is consistent with NEMA 23 standards. At 2.3 in. in diameter, motors are available in standard stack lengths of Ã-½,1,1Ã-½, and 2...
Read More »
Slotted Brushless DC Servomotors suit limited-space areas.
Available in 1.5, 2, and 2.5 in. lengths, 1.3 in. dia PITTMANÃ-® Series 1300 motors achieve model-dependent peak torques from 10-57 oz-in. and continuous torques from 3.5-8.5 oz-in. Rotor construction allows rotational speeds to 8,000 rpm, and 3 Hall sensors provide rotor position feedback for electronic commutation. Supplied in aluminum housing, products also feature 3-phase stator with...
Read More »Pool and Spa Kit aids installation of air blowers.
Designed to help dealers with installation of RotronÃ-® spa air blowers, custom-designed Pool and Spa Kit includes all products needed to ensure proper spa aeration, while protecting blower from hazardous operating conditions. Sound Muffler helps minimize noise levels, while air filter keeps dirt and other contaminants out of air stream. Air relief valve and pressure gauge protect blower from...
Read More »
Brushless DC Motors integrate drive electronics.
Featuring 3.0 in. OD and 2-wire electrical hookup, 12 V/24 V DurA-TekÃ-® Motors achieve continuous torque from 19.7-55 oz-in. and speeds from 2,927-4,400 rpm, depending on model. Smart onboard motor controls and electronic design deliver multi-speed operation, over-current control, locked-rotor protection, reverse polarity protection, transient over-voltage protection, and over-temperature...
Read More »Regenerative Blower suits concrete applications.
Offered as drop-in replacement for DR 707 regenerative blower, DR757 features compact construction and is powered by 4 hp motor that draws less than 7 A. Design, based on sound attenuation method, utilizes noise cancellation technology; further reductions are achievable through use of sound enclosures.
Read More »Tubeaxial Fans feature digital control.
Magnum(TM) 170 Series 24 Vdc Fans have operating voltage of 36-75 Vdc and produce 365 cfm free delivery. They include electronic commutation, locked rotor shut down protection, low-speed warning shut down, and automatic restart. I2C version delivers airflow of 512 cfm. It includes microprocessor-controlled circuitry with isolated 2-wire I2C/SMBus digital interface, and closed-loop speed control...
Read More »
Brushless Blowers utilize electronic control technology.
WINDJAMMERÃ-® Brushless DC Blowers incorporate microprocessor control, integrated gate bipolar transistor, and digital signal processor technology that allows for real-time fault monitoring and programmable performance. Intelligent monitoring and protection features include over voltage and under voltage protection, short circuit protection, and fault indication LED. Units are offered in 120...
Read More »
Regenerative Blowers are corrosion resistant.
Regenerative Blowers feature Chem-Tough(TM), which combines advantages of aluminum oxide ceramic and fluoropolymers to provide chemical resistance, hardness, abrasion resistance, and lubricity. Chem-Tough finishing employs anodizing, hard-coat plating, low-friction polymers, and dry lubricants to become part of blower's molecular structure. It will not peel or chip and can not be scratched,...
Read More »AMETEK DFS Hosts Fluid Moving Basics Webinar to Help Medical Device and Equipment Engineers, Product Professionals Drive More Quality, Efficiency and Cost Savings into Designs
Kent, OH (Feb. 17, 2021) – AMETEK Dynamic Fluid Solutions (DFS) -- the leading air-moving technology manufacturer of motors, blowers, fans, and pumps -- announced that it will host a webinar titled “Fluid Moving Basics for Medical Device and Equipment Designs.” This complimentary event will take place Tuesday, Feb. 23 at 2 pm EST, and will be hosted by Kevin Martin, Engineering...
Read More »AEM Limited Achieves JOSCAR Accreditation
Stansted Airport, Essex (Aug. 6, 2020) – AMETEK AEM Limited is delighted to announce it has achieved JOSCAR accreditation. JOSCAR (the Joint Supply Chain Accreditation Register) is a collaborative tool used by the aerospace, defense and security industry to act as a single repository for pre-qualification and compliance information. Using JOSCAR can determine if a supplier is “fit for...
Read More »
Brush-Commutated DC Motors provide quiet operation.
Designed with 2-pole stators, PITTMANÃ-® Series 9000 incorporates 7-slot skewed armatures to minimize magnetic cogging and enable smooth, quiet-running operation. Commutators are diamond turned after armature assembly to ensure concentricity, while windings are resin-impregnated for reliability in incremental motion applications. Offered in 6 lengths from 1.82-3.35 in., motors can achieve max...
Read More »
Brushless dc Blowers achieve max flow rates up to 190 cfm.
Offered in bypass and thru-flow versions, variable-speed WindjammerÃ-® Blowers accept line voltage up to 72 Vdc, depending on model. Units provide output pressure up to 97.7 in. H2O and are virtually maintenance free. Speed can be adjusted internally with onboard potentiometer, external PWM, or dc control. Measuring 5.7 in. dia, low-noise blowers are suitable for medical and industrial...
Read More »
Brushless DC Motors provide continuous torque to 40 oz-in.
ELCOM STÃ-® Series N2300 slotted brushless DC motors incorporate internal Hall sensor feedback for linear speed-torque characteristics, and variable speed control with control electronics. Motor features 6-slot lamination design and mount configuration that is consistent with NEMA 23 standards. At 2.3 in. in diameter, motors are available in standard stack lengths of Ã-½,1,1Ã-½, and 2...
Read More »
Slotted Brushless DC Servomotors suit limited-space areas.
Available in 1.5, 2, and 2.5 in. lengths, 1.3 in. dia PITTMANÃ-® Series 1300 motors achieve model-dependent peak torques from 10-57 oz-in. and continuous torques from 3.5-8.5 oz-in. Rotor construction allows rotational speeds to 8,000 rpm, and 3 Hall sensors provide rotor position feedback for electronic commutation. Supplied in aluminum housing, products also feature 3-phase stator with...
Read More »Pool and Spa Kit aids installation of air blowers.
Designed to help dealers with installation of RotronÃ-® spa air blowers, custom-designed Pool and Spa Kit includes all products needed to ensure proper spa aeration, while protecting blower from hazardous operating conditions. Sound Muffler helps minimize noise levels, while air filter keeps dirt and other contaminants out of air stream. Air relief valve and pressure gauge protect blower from...
Read More »
Brushless DC Motors integrate drive electronics.
Featuring 3.0 in. OD and 2-wire electrical hookup, 12 V/24 V DurA-TekÃ-® Motors achieve continuous torque from 19.7-55 oz-in. and speeds from 2,927-4,400 rpm, depending on model. Smart onboard motor controls and electronic design deliver multi-speed operation, over-current control, locked-rotor protection, reverse polarity protection, transient over-voltage protection, and over-temperature...
Read More »Regenerative Blower suits concrete applications.
Offered as drop-in replacement for DR 707 regenerative blower, DR757 features compact construction and is powered by 4 hp motor that draws less than 7 A. Design, based on sound attenuation method, utilizes noise cancellation technology; further reductions are achievable through use of sound enclosures.
Read More »Tubeaxial Fans feature digital control.
Magnum(TM) 170 Series 24 Vdc Fans have operating voltage of 36-75 Vdc and produce 365 cfm free delivery. They include electronic commutation, locked rotor shut down protection, low-speed warning shut down, and automatic restart. I2C version delivers airflow of 512 cfm. It includes microprocessor-controlled circuitry with isolated 2-wire I2C/SMBus digital interface, and closed-loop speed control...
Read More »