Company News

Pentek

One Park Way, Upper Saddle River, NJ, 07458, US

  • 201-818-5900
Share Like Tweet Add Email

Latest New Product News from
Pentek

Computer Hardware & Peripherals, Test & Measuring Instruments

Pre-Configured 3U VPX System speeds application development.

August 27, 2014

Configured for Windows 7 Professional or Linux OS, SPARK™ Model 8267 speeds application development for Pentek Flexor® FMC, Cobalt® Virtex-6, and Onyx® Virtex-7 FPGA 3U VPX software radio and data acquisition I/O boards. Rackmount workstation is populated with VPX SBC with Intel Core i7® processor and DDR3 SDRAM. All analog and timing cables are installed and tested, providing SMA connectivity for analog I/O lines. ReadyFlow drivers and board support libraries are also preinstalled and tested. Read More

Test & Measuring Instruments, Communication Systems & Equipment

Portable RF/IF Signal Recorder captures 3.6 GS/sec.

July 30, 2014

Equipped with 3.6 GHz 12-bit ADC, Talon® RTR 2729A can stream contiguous data to disk in real-time at 4.8 GBps when coupled with PCIe Gen. 3 SATA III RAID controller. User-programmable DDC allows system to capture tunable IF signals with bandwidths up to 360 MHz continuously for over 4 hr. Supplied in 16.0 x 6.9 x 13.0 in. housing, recorder uses Pentek Virtex-7 based Onyx software radio board for data streaming and is available in 7.6 and 15.3 TB SSD configurations. Read More

Test & Measuring Instruments, Communication Systems & Equipment

GSM Monitoring Receiver suits government and military systems.

May 15, 2014

Using optimized IP core for Xilinx Virtex-6 FPGA, Cobalt® Model 52663 3U VPX Module is suited for mobile monitoring systems that must capture some or all of 1100 uplink and downlink signals in both upper and lower GSM bands. Unit accepts 4 analog inputs from external analog RF tuner, where GSM RF bands are down converted to IF frequency. IF signals are then digitized by 4 A/D converters and routed to 4 channelizer banks, which perform digital downconversion of all GSM channels to baseband. Read More

Computer Hardware & Peripherals

Virtex-7 Transceiver Board suits communication, radar systems.

April 30, 2014

As 2-channel, wideband transceiver 3U VPX board based on Xilinx Virtex-7 FPGA, Onyx® Model 52751 is suitable for connection to HF or IF ports of communication or radar systems. Along with built-in data capture and generation features, board includes two 500 MHz 12-bit ADCs followed by 2 DDCs and two 800 MHz, 16-bit DACs with DUC. Programmable decimation and interpolation ranges for each DDC and DUC cover transceiver signal bandwidths from 4 kHz to 200 MHz. Read More

Test & Measuring Instruments

XMC Software Radio Module suits wideband signal applications.

April 2, 2014

Based on Xilinx Virtex-7 FPGA, Onyx® Model 71741 can digitize signal bandwidths up to 1,500 MHz. Front end accepts analog RF or IF inputs on pair of front panel SSMC connectors with transformer coupling into ADC12D1800 12-bit A/D. Converter operates in single-channel interleaved mode with 3.6 GHz sampling rate and 1.75 GHz input bandwidth or in dual-channel mode with 1.8 GHz sampling rate and 2.8 GHz input bandwidth. AutoSync feature supports A/D synchronization across multiple modules. Read More

Test & Measuring Instruments, Mechanical Power Transmission, Mechanical Components & Assemblies

Rackmount Recorders operate in extreme environments.

February 25, 2014

Housed in 4U military-specified chassis constructed using heavy-duty wrought aluminum extrusions, Talon® RTX Series provides aggregate recording rates up to 5 GBps. QuickPac™ canister allows storage drives to be removed and replaced in field. Each canister holds 8 SSDs, providing 7.68 TB of storage. Up to 4 QuickPac canisters can be installed in chassis for over 30 TB of total storage. In addition to forced air cooling system, recorders include 600 W, 85–264 V, 47–400 Hz AC power supply. Read More

Computer Hardware & Peripherals, Test & Measuring Instruments

FMC/VPX Carrier features optical backplane interface.

January 27, 2014

As 3U VPX FMC carrier with a Virtex-7 FPGA, Flexor™ Model 5973 features VITA 57.1 FMC (FPGA Mezzanine Card) site, 4 GB DDR3 SDRAM, PCIe (Gen 1, 2, and 3) interface up to x8, optional user-configurable gigabit serial I/O, and optional LVDS connections to FPGA for custom I/O. Flexor Model 3312 FMC offers four 250 MHz 16-bit A/Ds and two 800 MHz 16-bit D/As. FMC connector matches Virtex-7 FPGA carrier to promote performance and flexibility. Read More

Test & Measuring Instruments

High-Speed, Rugged Recorders serve ground/ship/air applications.

December 20, 2013

Suited for recording and reproducing wideband IF signals at sample rates up to 1 GS/sec, Talon® Model RTR 2728 (portable) and Model RTR 2748 (rackmount) are turnkey systems that use SSD storage technology to achieve aggregate recording and playback rates up to 4 GBps. Both systems are built on Windows® 7 Professional workstation with Intel® Core™ i7 processor and provide GUI and API, signal analysis tools, and up to 38.4 TB of hot-swappable SSD storage. Read More

Other Company News from
Pentek