Company News


One Park Way, Upper Saddle River, NJ, 07458, USA

  • 201-818-5900

General Information:
Mario Schiavone
Phone: 201-818-5900 ext 770
E-mail this person

Latest New Product News from

electrical equipment & systems, test & measuring instruments

Software Radio Modules leverage TI ADC32RF45 ADC.

May 20, 2016

Featuring Texas Instruments (TI) ADC32RF45 dual 14-bit, 3 GSPS ADC converter, FlexorSet® 5973-320 for 3U VPX and FlexorSet 7070-320 for PCIe consist of Flexor Model 3320 configurable 2-channel A/D and 2-channel D/A FMC installed on either of 2 carriers. FPGA IP, contained on carriers for A/D acquisition and D/A waveform generation, is optimized to match features of FMC, while software development tools accelerate application development and market introduction. Read More

electrical equipment & systems, electronic components & devices, test & measuring instruments

XMC FPGA Module includes VITA 49 protocol engine.

January 22, 2016

Based on Xilinx Virtex-6 FPGA, Cobalt® Model 71664 includes IP engine for VITA 49 Radio Transport protocol. Front end A/D converter stage accepts 4 analog HF or IF inputs on front panel SSMC connectors, with each transformer-coupled to TI ADS5485 200 MHz, 16-bit A/D converters. Designed for both rugged and lab environments, Model 71664 comes preconfigured with suite of built-in functions for digital down conversion, data capture, synchronization, time tagging, and formatting. Read More

test & measuring instruments

Rackmount Recorder provides 16 analog input channels.

December 3, 2015

Supplied in 4U rackmount chassis optimized for rugged environments, Talon® Model RTR 2750 provides phase-coherent, synchronous recording of 16 independent input channels at sustained aggregate data rate up to 8 GBps. Each input channel includes 250 MHz 16-bit A/D and FPGA-based digital downconverter with independent tuning and programmable decimation from 2–65,536 to capture RF signal bandwidths from 3 kHz to 100 MHz. Utilizing up to 32 hot-swappable SSDs, RTR 2750 offers 61 TB storage capacity. Read More

electrical equipment & systems, test & measuring instruments

A/D and D/A Converters utilize Virtex-7 FPGAs.

October 30, 2015

Suited for radar, communications, and DAQ applications, FlexorSet Model 5973-324 for 3U VPX and Model 7070-324 for PCIe consist of Flexor Model 3324 4-channel A/D and 4-channel D/A FMC installed on either of 2 carriers. Carriers contain Pentek FPGA intellectual property for A/D acquisition and D/A waveform playback, which is matched to four 500 MHz, 16-bit A/Ds and four 1.5 GHz, 16-bit D/As with digital up-converters on FMC. Software development tools enable rapid application development. Read More

electrical equipment & systems, test & measuring instruments

FMC Subsystems offer optical interface solutions.

September 30, 2015

Combining performance of Virtex-7 and optical interconnects with flexibility of multichannel FMC data converter, FlexorSet™ Series creates complete radar and software radio sub-system. FlexorSet Model 5973-312 for 3U VPX and Model 7070-312 for PCIe, utilize Flexor Model 3312 4-Channel A/D and D/A FMC installed on either of 2 Flexor FMC carriers. Both are pre-configured with IP, providing built-in functions for data capture, synchronization, time tagging and formatting. Read More

test & measuring instruments

RF/IF Signal Recorder has rugged and portable design.

May 4, 2015

Sustaining recording rates to 3.2 Gbps, RTR 2726A is used for wideband signal recording/playback in signal intelligence and RF testing. Up to 8 recording and playback channels can be configured in appropriate combination for specific applications, and optional DC power supply enables use in ground or airborne vehicles without inverters. Ruggedized 16.0 x 6.9 x 13.0 in. housing weighs <30 lb, and workstation includes 17 in. LCD monitor, hot-swap SSD array (1.9&ndash;15.3 TB), and multiple I/O options. Read More

computer hardware & peripherals, electrical equipment & systems

Adaptive IF Relay XMC aids commercial, military communications.

April 6, 2015

Accepting 2 IF (Intermediate Frequency) analog input channels, Cobalt® Model 71624 modifies up to 34 signals, and then delivers them to 2 analog IF outputs. Any signal within each IF band can be independently enabled/disabled and changed in both frequency and amplitude. XMC features Virtex-6 FPGA and 34 independently tunable DDCs and supports such functions as signal drop/add/replace, frequency shifting and hopping, amplitude equalization, and bandwidth consolidation. Read More

test & measuring instruments

Portable Serial FPDP Recorder suits field or laboratory use.

January 22, 2015

Capturing up to 8 Serial FPDP data streams in real-time to SSDs, Talon® RTR 2736A complies with VITA 17.1 specification and supports sFPDP baud rates up to 4.25 Gbaud. Unit includes PCIe Gen 3 SATA III RAID controller capable of streaming contiguous data to disk in real-time at aggregate rates up to 3.2 Gbps. Hot-swappable SSD array is available in 1.9&ndash;15.3 TB configurations and supports RAID levels 0, 1, 5, or 6. Housed in 16.0 x 6.9 x 13.0 in. case, rugged recorder weighs just 30 lb. Read More

computer hardware & peripherals, test & measuring instruments

Pre-Configured 3U VPX System speeds application development.

August 27, 2014

Configured for Windows 7 Professional or Linux OS, SPARK&trade; Model 8267 speeds application development for Pentek Flexor® FMC, Cobalt® Virtex-6, and Onyx® Virtex-7 FPGA 3U VPX software radio and data acquisition I/O boards. Rackmount workstation is populated with VPX SBC with Intel Core i7® processor and DDR3 SDRAM. All analog and timing cables are installed and tested, providing SMA connectivity for analog I/O lines. ReadyFlow drivers and board support libraries are also preinstalled and tested. Read More

communication systems & equipment, test & measuring instruments

Portable RF/IF Signal Recorder captures 3.6 GS/sec.

July 30, 2014

Equipped with 3.6 GHz 12-bit ADC, Talon® RTR 2729A can stream contiguous data to disk in real-time at 4.8 GBps when coupled with PCIe Gen. 3 SATA III RAID controller. User-programmable DDC allows system to capture tunable IF signals with bandwidths up to 360 MHz continuously for over 4 hr. Supplied in 16.0 x 6.9 x 13.0 in. housing, recorder uses Pentek Virtex-7 based Onyx software radio board for data streaming and is available in 7.6 and 15.3 TB SSD configurations. Read More

communication systems & equipment, test & measuring instruments

GSM Monitoring Receiver suits government and military systems.

May 15, 2014

Using optimized IP core for Xilinx Virtex-6 FPGA, Cobalt® Model 52663 3U VPX Module is suited for mobile monitoring systems that must capture some or all of 1100 uplink and downlink signals in both upper and lower GSM bands. Unit accepts 4 analog inputs from external analog RF tuner, where GSM RF bands are down converted to IF frequency. IF signals are then digitized by 4 A/D converters and routed to 4 channelizer banks, which perform digital downconversion of all GSM channels to baseband. Read More

computer hardware & peripherals

Virtex-7 Transceiver Board suits communication, radar systems.

April 30, 2014

As 2-channel, wideband transceiver 3U VPX board based on Xilinx Virtex-7 FPGA, Onyx® Model 52751 is suitable for connection to HF or IF ports of communication or radar systems. Along with built-in data capture and generation features, board includes two 500 MHz 12-bit ADCs followed by 2 DDCs and two 800 MHz, 16-bit DACs with DUC. Programmable decimation and interpolation ranges for each DDC and DUC cover transceiver signal bandwidths from 4 kHz to 200 MHz. Read More

test & measuring instruments

XMC Software Radio Module suits wideband signal applications.

April 2, 2014

Based on Xilinx Virtex-7 FPGA, Onyx® Model 71741 can digitize signal bandwidths up to 1,500 MHz. Front end accepts analog RF or IF inputs on pair of front panel SSMC connectors with transformer coupling into ADC12D1800 12-bit A/D. Converter operates in single-channel interleaved mode with 3.6 GHz sampling rate and 1.75 GHz input bandwidth or in dual-channel mode with 1.8 GHz sampling rate and 2.8 GHz input bandwidth. AutoSync feature supports A/D synchronization across multiple modules. Read More

mechanical components & assemblies, mechanical power transmission, test & measuring instruments

Rackmount Recorders operate in extreme environments.

February 25, 2014

Housed in 4U military-specified chassis constructed using heavy-duty wrought aluminum extrusions, Talon® RTX Series provides aggregate recording rates up to 5 GBps. QuickPac&trade; canister allows storage drives to be removed and replaced in field. Each canister holds 8 SSDs, providing 7.68 TB of storage. Up to 4 QuickPac canisters can be installed in chassis for over 30 TB of total storage. In addition to forced air cooling system, recorders include 600 W, 85&ndash;264 V, 47&ndash;400 Hz AC power supply. Read More

computer hardware & peripherals, test & measuring instruments

FMC/VPX Carrier features optical backplane interface.

January 27, 2014

As 3U VPX FMC carrier with a Virtex-7 FPGA, Flexor&trade; Model 5973 features VITA 57.1 FMC (FPGA Mezzanine Card) site, 4 GB DDR3 SDRAM, PCIe (Gen 1, 2, and 3) interface up to x8, optional user-configurable gigabit serial I/O, and optional LVDS connections to FPGA for custom I/O. Flexor Model 3312 FMC offers four 250 MHz 16-bit A/Ds and two 800 MHz 16-bit D/As. FMC connector matches Virtex-7 FPGA carrier to promote performance and flexibility. Read More

test & measuring instruments

High-Speed, Rugged Recorders serve ground/ship/air applications.

December 20, 2013

Suited for recording and reproducing wideband IF signals at sample rates up to 1 GS/sec, Talon® Model RTR 2728 (portable) and Model RTR 2748 (rackmount) are turnkey systems that use SSD storage technology to achieve aggregate recording and playback rates up to 4 GBps. Both systems are built on Windows® 7 Professional workstation with Intel® Core&trade; i7 processor and provide GUI and API, signal analysis tools, and up to 38.4 TB of hot-swappable SSD storage. Read More

communication systems & equipment

Two-Channel Analog RF Tuner is suited for intelligence systems.

November 12, 2013

Bandit® Model 7120 accepts, amplifies, filters, and downconverts 400 MHz to 4 GHz RF signals to IF signal suitable for A/D conversion by signal acquisition modules. Front panel SSMC connections on shielded PMC/XMC module aid integration into RF systems. Low noise amplifiers are provided along with 2 programmable attenuators, allowing downconversion of -60 to -20 dBm input signals in 0.5 dB steps. Input frequency is programmable across 400&ndash;4,000 MHz band with tuning resolution of <100 KHz. Read More

test & measuring instruments

XMC FPGA Module suits UAV, radar, communications applications.

October 24, 2013

Based on Xilinx Virtex-7 FPGA, single-channel Onyx® Model 71730 employs 1 GHz, 12-bit ADC and 1 GHz, 16-bit DAC. Module comes with 4 GB DDR3 memory (1,600 MHz) and can receive and transmit at same sampling rate, supporting signal bandwidths up to 400 MHz. Gen 3 PCIe interface delivers peak transfer rates to 8 GBps, and optional LVDS and gigabit serial connections to Virtex-7 FPGA are available. Built-in functions are provided for data capture, synchronization, time tagging, and formatting. Read More

test & measuring instruments

LVDS Recorders come in commercial and ruggedized versions.

October 8, 2013

Capable of handling 32-pair differential LVDS DIO signals, Talon® turnkey recording systems include commercial rackmount RTS 2718, rugged portable RTR 2738, and rugged rackmount RTR 2758. Disk storage technology promotes flexibility and enables aggregate recording rates to 4 GBps. Systems can capture any type of streaming source, including live transfers from sensors or data from other computers. Gigabit Ethernet and USB interfaces and 8X double layer DVD±R/RW drive are standard. Read More

test & measuring instruments

LVDS DIO Module serves control, data capture applications.

August 27, 2013

<span face=""><span face="">With built-in data capture and data generation facilities</span>, </span>Model 71610 provides 32 LVDS differential input or output pairs plus LVDS clock, data valid, and flow control signals via front panel, 80-pin connector routed to Virtex-6 FPGA. <span face="">This VITA 42 XMC Cobalt® module can plug into such carriers as VPX, cPCI, AMC, and PCIe. While </span><span face="">x4 PCIe is supported on primary P15 XMC connector, secondary P16 XMC connector supports dual 4X or single 8X user-installed gigabit serial interfaces.</span> Read More

Other Company News from