Stonel Corp.
Fergus Falls, MN 56537
Modules integrate linear on-off valves into bus networks.
Able to tie on-off knife gate, globe, and other linear valves into bus networks, modules consist of 2 Hawkeye linear position sensors and one JM I/O module with integral pneumatic valve. Red or green LEDs with NO or NC function may be selected. User may also select from low-power solenoid pneumatic valve or ultra low-power Piezo valve. Total power consumption with Piezo Foundation Fieldbus module...
Read More »
I/O Enclosure has multiple connector options.
Made of Lexan Polycarbonate, FieldBlock bus network drop connection and I/O enclosure incorporates corrosion-proof design suited for general-purpose and nonincendive process networking applications with flexible wiring systems. Users may select from multi-drop or switched drop connectors, I/O or relay modules, and special module configurations. Enclosure is fully sealed for use in heavy wash-down...
Read More »
Power Supplies suit bus-networking applications.
FieldLinkÃ-® Power Supplies are available in models designed specifically for AS-interface, Foundation Fieldbus, DeviceNet, Modbus, and Profibus PA and DP. Solid-state circuitry limits current output under overload or short-circuit conditions and restricts power to 100 W. Potential damage to networking components is eliminated. Units are DIN rail mounted and comply with requirements for Class...
Read More »
Connectors protect process network from short circuits.
FieldLinkÃ-® Switched Drop Connectors rely on solid-state protection circuitry, which reacts to short-circuit faults to keep remaining bus segment unaffected. Switchable junction terminals interconnect bus drops/spurs to main bus trunk line. Connectors are offered in Class I, Div 1 & 2 versions; NEMA 4, 4X, and 6; and in single and multiple drops for AS-Interface and Foundation Fieldbus...
Read More »
Valve Communications Terminal connects fieldbus and sensors.
Eclipse VCT connects position sensors, power outputs to solenoids, and communications systems such as AS-I, DeviceNet, Modbus and Foundation Fieldbus modules to standard VDI/VDE 3845 (Namur) valve actuators. It is available in non-incendive version for hazardous areas and in general-purpose micro-connector version for heavy wash-down and non-hazardous applications. Red and green LEDs indicate...
Read More »
Modules integrate linear on-off valves into bus networks.
Able to tie on-off knife gate, globe, and other linear valves into bus networks, modules consist of 2 Hawkeye linear position sensors and one JM I/O module with integral pneumatic valve. Red or green LEDs with NO or NC function may be selected. User may also select from low-power solenoid pneumatic valve or ultra low-power Piezo valve. Total power consumption with Piezo Foundation Fieldbus module...
Read More »
I/O Enclosure has multiple connector options.
Made of Lexan Polycarbonate, FieldBlock bus network drop connection and I/O enclosure incorporates corrosion-proof design suited for general-purpose and nonincendive process networking applications with flexible wiring systems. Users may select from multi-drop or switched drop connectors, I/O or relay modules, and special module configurations. Enclosure is fully sealed for use in heavy wash-down...
Read More »
Power Supplies suit bus-networking applications.
FieldLinkÃ-® Power Supplies are available in models designed specifically for AS-interface, Foundation Fieldbus, DeviceNet, Modbus, and Profibus PA and DP. Solid-state circuitry limits current output under overload or short-circuit conditions and restricts power to 100 W. Potential damage to networking components is eliminated. Units are DIN rail mounted and comply with requirements for Class...
Read More »
Connectors protect process network from short circuits.
FieldLinkÃ-® Switched Drop Connectors rely on solid-state protection circuitry, which reacts to short-circuit faults to keep remaining bus segment unaffected. Switchable junction terminals interconnect bus drops/spurs to main bus trunk line. Connectors are offered in Class I, Div 1 & 2 versions; NEMA 4, 4X, and 6; and in single and multiple drops for AS-Interface and Foundation Fieldbus...
Read More »
Valve Communications Terminal connects fieldbus and sensors.
Eclipse VCT connects position sensors, power outputs to solenoids, and communications systems such as AS-I, DeviceNet, Modbus and Foundation Fieldbus modules to standard VDI/VDE 3845 (Namur) valve actuators. It is available in non-incendive version for hazardous areas and in general-purpose micro-connector version for heavy wash-down and non-hazardous applications. Red and green LEDs indicate...
Read More »