Company News

Danfoss Power Solutions Co.

2800 East 13th Street, Ames, IA, 50010, USA

  • 515-239-6000

Latest New Product News from
Danfoss Power Solutions Co.

Controls & Controllers

MC018 High-Current Controller runs up to 4kHz at maximum load.

Jun 01, 2017

Designed to control high-current devices such as excessive noise and moderate pin/controller power, MC018 High-Current Controller is rated to maximum total current of 160 A and steady state current of 120 A. Featuring programmable soft fuse and power supply, unit is suitable for actuators, windshield wipers, fan drive, lamps, lights, engine starter and levelling control applications. Product... Read More

Fluid & Gas Flow Equipment

K2 Axial Piston Pumps are equipped with fan drive control.

Apr 08, 2017

Suitable for agriculture, construction, road-building, material-handling, forestry, and turf-care industries, K2 Axial Piston Pumps feature quieter pump design for allowing dissipation of noise and vibration. Designed with modular endcaps for increased flexibility in installations, product comes with 30 percent reduced weight. Unit provides maximum efficiency with reduced length and width by... Read More

Controls & Controllers

Fan Drive Control offers easy tuning design.

Apr 08, 2017

Available on K2, J and F frames, Series 45 Fan Drive Control is 2.2 Kg lighter than current electronic pressure control. Offering better control resolution, FDC improves cooling efficiency and operator productivity. Product is used with Series 45 axial piston pumps and Reverse Displacement Motor.

Read More

Mechanical Power Transmission

Orbital X Motors feature corrosion resistant finishing.

Mar 06, 2017

Available in OMP X and OMR X models, Orbital X Motors are used in sweeper and scrubber, harvester, mower and forklift truck machines. Featuring strong bearing capacity and improved shaft sealing, motors run with more productivity, high torque, increased lead time and provide faster response time.

Read More

Fluid & Gas Flow Equipment

EHi Steering Valves offer remote mounting options.

Mar 06, 2017

Available in 10 hydraulic configurations, EHi Steering Valves feature 12 to 70 lpm flow capacity. Units can be used in combination with steering unit or as standalone valve. Embedded with software, valves offer GPS auto guidance, quick steering and joystick steering. EHi Steering Valves meet SIL2 standards when used in combination with PVED CLS and are suitable for use with sprayers, wheel... Read More

Fluid & Gas Flow Equipment

Closed Circuit Axial Piston Pumps offer infinite applicability.

Aug 25, 2016

Available in 28/32 and 38/45 cm³ frames, MP1 pumps help OEMs provide precise machine control. Modular configuration accommodates diverse applications and industries, while Danfoss Telematics Solutions offer endless connectivity and data capture possibilities. Able to scale to required control capability, including MDC (manual displacement control) and EDC (electrical displacement... Read More

Computer Hardware & Peripherals, Controls & Controllers

Heavy-Duty Mobile Machinery Joysticks are ergonomic, customizable.

Feb 16, 2016

Comprised of intelligent mobile control solutions, PLUS+1®-compliant JS1-H series can be customized for application needs in several ways: button and switch placement as well as selection between 3 bases – single-axis with spring return or friction hold and dual-axis with spring return – and 5 ergonomically tested grip types. Pushbuttons, rollers, and other controls on each can be... Read More

Sensors Monitors & Transducers

Dual-Axis Slope Sensor featuring MEMS technology.

Aug 05, 2013

PLUS+1™-compliant CSS1000 intelligently cancels out transverse machine motion to provide precise, fast-responding, stable slope signal. For each axis, CAN 2.0 B-compliant and IP67-rated sensor features MEMS-based accelerometer to measure angle with respect to gravity as well as MEMS gyroscope to measure acceleration around axis. Each axis has operation range of ±12.5° (±22% slope).... Read More

Software

Graphical Programming Environment accelerates time to market.

Apr 26, 2013

Incorporating electronic flow sharing features and intelligent engine speed control, PLUS+1™ GUIDE (Graphical User Integrated Development Environment) v6.1 supports PLC programming language Structured Text – part of IEC 61131-3 standard. PLUS+1 GUIDE Work Function Control Library, optional, contains pre-programmed software blocks essential to development of electronically controlled work... Read More

Controls & Controllers, HVAC

Fan Drive Control offers reversing and zero-speed capability.

Apr 25, 2013

Available for H1 piston pumps, PLUS+1™ Compliant Fan Drive Control utilizes closed-circuit technology to meet demand for hydraulic cooling fan systems in Tier 4-compliant mobile off-highway equipment applications. Unit is available in 12 and 24 V models and is suitable for machines above 20 kW. In addition to proportional forward control, FDC can automatically reverse direction of fan to... Read More

Controls & Controllers

Safety Controllers enhance mobile off-highway vehicle design.

Aug 23, 2012

PLUS+1(TM)-Compliant models SC024-010/-020 and SC050-020 offer functional safety capabilities to OEM designers of off highway vehicles worldwide. Designed to achieve SIL 2 and PL-d standards, controllers help meet European Machinery Directive 2006/42/EC. Each programmable device includes 2 independent MPUs with redundant control of each output. Safety layer software provides automatic fault... Read More

Green & Clean, Software

Function Block Library aids development via SAE J1939 support.

May 17, 2012

Featuring function blocks supporting Environmental Protection Agency (EPA) Tier 4-emissions-compliant systems and Sauer-Danfoss products, PLUS+1(TM)-compliant J1939 Software Function Block Library helps OEMs accelerate mobile machine development. Solution offers pre-developed software blocks - basic PGN Receiver and PGN Transmitter, Diagnostic, and other message-specific blocks - supporting SAE... Read More

Mechanical Power Transmission

Hydrostatic Transmission targets small-equipment segment.

Mar 13, 2012

Integrating closed circuit variable displacement piston pump with direct displacement control and fixed motor, LDU20 U-Style Transmission features low operating force of 25 Nm at 2,500 rpm max. Unit measures 170 x 180 x 240 mm high, allowing installation in space-constrained OEM equipment, including turf care machines, compact utility tractors up to 30 hp, and agricultural vehicles. By attaching... Read More

Construction Equipment and Supplies, Controls & Controllers, Transportation Industry Products

Electronic Foot Pedal has PLUS+1(TM)-compliant design.

Mar 12, 2012

Designed for performance, durability, safety, and control system integration, KEP3 bi-directional, over-center rocker pedal is used to drive vehicles equipped with hydrostatic transmissions and/or electronically controlled engines. There is 14° angular rotation fore and aft, and included sensor uses Hall-Effect technology and provides 2 types of redundant signals to fit various control... Read More

Fluid & Gas Flow Equipment

Direct Displacement Control Pump provides 20 cm³ displacement.

Dec 06, 2011

Measuring just 183.5 mm long, Model DDC20 allows installation in space-constrained, light-duty OEM equipment. Male slipper design minimizes friction on both piston and bore of cylinder block, optimizing fuel efficiency and extending oil life. Valve plate design brings noise down to 78.5 dBa while operating at 200 bar and 2,000 rpm. With optional loop flushing and bypass valves, machine or load... Read More

Computer Hardware & Peripherals, Controls & Controllers

Machine Control Joystick targets mobile off-highway equipment.

May 25, 2011

Featuring 300 lb shaft load and IP67 rating, PLUS+1(TM) JS7000 is dust-tight and protected against temporary immersion in water. Unit is available with single- and dual-axis configurations and spring centering, with option of 20 or 25° of handle travel in dual-axis configuration. Various pushbutton, trigger switch, and proportional roller switch configurations are available on each grip.... Read More

Green & Clean, Mechanical Power Transmission

Bent Axis Motors feature electrical control.

Apr 20, 2011

Designed to complement H1 axial piston pumps, H1 160 cm³ Bent Axis Motors provide 0°capability, enabling seamless, on-the-go shifting from 32-0°, such as in wheel assist applications. Variable displacement motors are optimized for electrical control and are fully PLUS+(TM) Compliant. To withstand harsh working environments, controls are designed with IP67 and IP69K rating. Typical... Read More

Fluid & Gas Flow Equipment

Piston Pumps target off-road vehicle applications.

Mar 01, 2011

Offered in 60 cm³/68 cm³ and 89 cm³/100 cm³ frame sizes, H1 Series helps compensate for reduced power levels of Tier IV/Stage IV emissions-compliant engines. Units offer range of electric-only control options, including Electrical Displacement Control for load-independent speed control, Forward/Neutral/Reverse for on/off work function control, and Non-Feedback Proportional Electrical... Read More

Mechanical Power Transmission

Cast Iron Gear Motor features reversing functionality.

Apr 22, 2010

With displacements from 14-45 cc, D Series offers integrated valve solution to match fan speed to cooling demand. Reversing function uses solenoid-operated directional control valve to reverse fan rotation and proportional relief valve to regulate fan speed. Designed to limit pressure spikes during sudden reversals, dual shock/anti-cavitation valves allow flow to bypass motor as fan winds down.... Read More

Transportation Industry Products

Automotive Control features SIL 2 certification.

Mar 03, 2010

Automotive Control (AC) incorporates H1 variable piston pump with embedded electronic control, H1 bent axis variable piston motor, sensors, and associated HMI devices. Combined with intelligent software, PLUS+1(TM)-Compliant system provides automotive style automatic transmission driving experience that lets operators adjust hydrostatic transmission characteristics to suit specific operating... Read More

Other Company News from
Danfoss Power Solutions Co.