Valcor Engineering Corporation
Springfield, NJ 07081
Valves resist corrosion, contamination, and clogging.
Diaphragm Isolated Solenoid Valves Series SV 51 and SV 73 use flexible diaphragms to isolate operating parts from fluid being handled, eliminating metal-to-fluid contact. Available in 2-way NC and NO as well as 3-way configurations, seal materials include Viton, EPDM and TeflonÃ-®. Standard voltages are 24 Vdc and 115 Vac/60 Hz, while pressures range from vacuum to 100 psi and flow rates up...
Read More »
Stepper/Servo Brake is front-end mounted.
FEB failsafe, power-off brake is specifically designed to be mounted on front end of stepper or servo motors as added safety feature for holding load in place. Brake holds load like parking brake or can be designed to stop load when power is shut off. Available in NEMA 23 and NEMA 34 sizes, FEB features maximum speed of 8,000 rpm. Attached to stepper or servo motor by bolting on or plugging in,...
Read More »
Brake plugs into servo and stepper motors.
Fail-safe Series SSB incorporates zero-backlash, permanent-magnet brake and torsionally rigid coupling to accept misalignment. Dual bearings allow greater overhung loads created by drive-belt pulleys, chain sprockets, and gearheads. Brake is available in 6 models, for NEMA 23, 34, and 42 sizes. Applications include robotics, linear, and rotary actuators, multi-axis positioning tables, material...
Read More »
Solenoid Pumps meter and dispense liquids.
SV500 Series is self-priming, can start from dry condition, and can lift up to 6 ft of water. Model SV500 has output range of 100 to 1500 microliters per dispense; SV515 outputs 3 to 15 microliters; SV525 outputs 10 to 40 microliters; and SV560 outputs 50 to 350 microliters per dispense. Pumps can operate up to 1,000,000 cycles without maintenance, and handle most semi- and non-corrosive fluids.
Read More »
AC Brakes are wired directly to input of motor.
Temporiti power-off brakes are designed to hold load or to stop load completely when power is shut off. Nine sizes are available with torques from 3 to 220 lb-ft. Voltages include 208, 230, 460, and 575 Vac. Brakes offer quiet operation (
Read More »
Dispensing Pumps handle aggressive media applications.
SV600 Series dispensing pumps, utilizing Dri-Solenoid concept, isolate fluids from all metal parts making them suitable for dispensing corrosive and high purity fluids. Repeatability is within 2%. Users can mechanically set volume-per-stroke output, and control flow rate by rate of cycling. Pumps are available with choice of elastomeric seal materials, mounting configurations, inlet/outlet...
Read More »
Front End Brakes offer IP65 protection.
Available for NEMA 23 and 34 sizes and designed specifically to plug in to Stepper or Servo Motors, SSB Series incorporates zero backlash permanent magnet brake and torsionally rigid coupling to accept misalignment. Brakes are also available in NEMA 42 size offering IP65 splashproof and dustproof protection. All 6 models include dual preloaded sealed bearings and black anodized aluminum housing.
Read More »
Failsafe Brake fits stepper and servo motors.
Model RFEB power-off brake mounts on front end of standard NEMA 23 and NEMA 34 stepper or servo motors to prevent machine from operating or for holding load in place when power fails. It has spring-set design, ball bearing supported output shaft, and operates at speeds to 8,000 rpm. Brake is available in 24 and 90 Vdc versions. Applications include factory automation, material handling, robotics,...
Read More »
Brake is designed for demanding applications.
XTREME TORQUE Model XT-58B is 16.3 in. high and 2.44 in. in diameter with holding torque of 60 in.lbs. XT Series clutches and brakes consistently offer coefficients of friction between 0.75 and 0.95. Applications include robotics, computer chip and clean room handling equipment, automation machinery, and material handling equipment.
Read More »
Tiny Pumps dispense small amounts.
SV700 Series of inert, solenoid-operated micro pumps are suitable for dispensing re-agents, dilutants and lubricants. Pumps are less than 3 in. high, have diameter of 1.10 in., and dispense volume of 50-250 Ã-µL. Available with glass-filled polypropylene pump head and EPDM or viton elastomers, pumps are compatibile with wide range of fluids. Fluid connections include 1/4-28 flat bottom ports,...
Read More »Valcor Releases New White Paper on Quick Disconnects
Springfield, NJ, April 9, 2021 - Valcor Engineering Corporation, a world-class designer and manufacturer of custom precision fluid controls for space, aircraft, nuclear and scientific/industrial industries, has just released a new white paper on Quick Disconnects entitled “Line Separation and Quick Disconnects.” When faced with the need to join two fluid lines that must occasionally be...
Read More »Valcor Releases New White Paper on Model-based System Engineering
Springfield, NJ, March 4, 2021 - Valcor Engineering Corporation, a world-class designer and manufacturer of custom precision fluid controls for space, aircraft, nuclear and scientific/industrial industries, has just released a new white paper on Model-Based Systems Engineering entitled “Designing Fluid Control Components in a Virtual Environment.” Design engineering technology has evolved...
Read More »Valcor Announces New Website Launch
Springfield, NJ, September 23, 2020 - Valcor Engineering Corporation, an industry leader in the design and manufacture of fluid control components and subsystems, clutches, brakes & OBIGGS systems, is proud to announce the launch of its newly redesigned website at www.valcor.com. The new site offers a user-friendly experience with improved navigation and functionality, while exploring the...
Read More »Valcor Engineering Goes Greener!
Springfield, NJ, December 10, 2019 - Valcor Engineering Corporation, a world-class designer and manufacturer of custom precision fluid controls, motion controls, and turnkey systems for space, aircraft, nuclear, and scientific/industrial clients, is going greener! Located in Springfield, New Jersey, Valcor makes efforts every day to protect the environment and limit their carbon footprint. Their...
Read More »Valcor Acquires Rights to Manufacture and Sell CU Services Products
Springfield, NJ, August 1, 2018 - Valcor Engineering, a designer and manufacturer of solenoid valves and flow control components for liquids and gases, is proud to announce they have acquired the rights to manufacture and sell CU Services products. CU Services has been providing products to the power and process industries for over forty-five years. Their line of products include: plug resistant...
Read More »Valcor Nuclear Exhibits at AUG/MUG 2016
Valcor Engineering’s Nuclear Group had a great time exhibiting at the AUG/MUG 2016 Joint Conference, which was held January 11-15 in New Orleans, LA. This conference was a joint meeting of the Air-Operated Valve Users’ Group (AUG) and the Motor-Operated Valve Users’ Group (MUG). AUG is dedicated to the development and exchange of technical information concerning the performance, design,...
Read More »Valcor Nuclear Exhibits at Power-Gen International 2015
Valcor’s Nuclear Group recently attended POWER-GEN International in Las Vegas, Nevada from December 8-10, 2015. POWER-GEN International is the world’s largest power generation event focusing on the industry’s latest innovations, technical trends and business strategies. More than 21,000 industry professionals from around the world gathered to discuss effective solutions for maintaining,...
Read More »Valcor Aerospace: A Strong Heritage Providing Value to the Aerospace Industry for Over 60 Years
Valcor was founded in 1951 in a small industrial loft in Newark, New Jersey, by Morton Kreitchman. The first valve design was a “floating seal” fuel control valve for the aircraft industry. Since that time, Valcor has evolved into a thriving company specializing in fluid control products for Aircraft, Space, Industrial, Scientific and Nuclear applications. With over 60 years of proven...
Read More »New Brochure on the Nuclear Group's Capabilities is Now Available!
Valcor’s Nuclear Product Group has just released its brand new capabilities brochure. Within its pages you can get a feel for the vast capabilities of this group and the years of experience behind the products. You can download the pdf version here. If you would like to request a print copy, kindly fill out our contact form here and mention the brochure in the questions/comments section. Valcor...
Read More »Valcor Nuclear Exhibits at AUG/MUG Conference
Valcor Engineering’s Nuclear Group had an exciting time exhibiting at the AUG/MUG 2015 Joint Conference, which was held January 12-15 in Jacksonville, FL. This conference was a joint meeting of the Air-Operated Valve Users’ Group (AUG) and the Motor-Operated Valve Users’ Group (MUG). AUG is dedicated to the development and exchange of technical information concerning the performance,...
Read More »