RF Connector Operations
Danbury, CT 06810
Share:
Precision 2.92 mm Connector suits 40 GHz applications.
Model RF29M-SR1 consists of 50 ohm, 2.92 mm precision connector that can be used up to 46 GHz. It conforms to IEEE 287 standard, is mechanically compatible with SMA and 3.5 mm connectors, and features shortened male pin that ensures non-destructive mating process. Designed for .085 in., semi-rigid and high-performance flexible cable assemblies, product has gold-plated body and pin with molded...
Read More »
Panel-Mount Connectors suit high-frequency applications.
Two-hole, SMA connectors are fabricated to MIL-STD-348A, Section 310 with nickel- or gold-plated brass bodies, Teflon insulation, and gold-plated contacts. Model RSA-3261 SMA jack and Model RSA-3221 SMA plug have solder cups, while Models RSA-3262, RSA-3268, and RSA-3269 have solder posts with flush and extended dielectric terminations. Connectors are suitable for microwave applications where...
Read More »
Installation Tools have multiple function capabilities.
Cutters, able to cut small wire and coax through aluminum and copper cable, handle wire sizes from 2 AWG to 250 mmÃ-². Strippers handle wire as small as 30 AWG and as large as 10 AWG, coaxial cables to .600 in. dia, multi-conductor cables, and various CAT 5 and 6 wires and cables. Crimpers handle insulated and non-insulated terminals to 4, 6, and 8 conductor modular plugs such as RJ11, RJ12,...
Read More »
Crimp Connector complies with FCC Part 15.
Model RP-4252-B reverse polarity bulkhead crimp connector, with SMB jack body and SMB plug contact, is IEEE 802.11b Wi-Fi(TM) Compatible. Because it will not mate with standard SMB plugs, it complies with FCC Part 15. Designed for use up to 4 GHz, connector features nickel-plated brass body, gold plated contact, nickel plated hex nut and lock washer, and TeflonÃ-® insulation. Connector can be...
Read More »
Kit contains 3.5 mm RF adapters.
RFA-4031-01 kit features 3 adapters, each with 50 ohm impedance. They are made of non-magnetic 303 stainless steel, with beryllium-copper contacts supported with bead configuration. Units operate up to 34 GHz. Female contacts feature 4-slot configuration, ensuring that pressure is distributed evenly during engagement of male pin. Coaxial connectors and adapters intermate with SMA and 2.9 mm...
Read More »
SMB Connectors provide low mating and un-mating force.
SMB Series 75-Ohm Connectors include plugs, right-angle plugs, and PCB jacks for frequencies up to 4 GHz. RSB-301-179, positive-locking plug uses spring-loaded collar that must be retracted before connector will un-mate. RSB-300-1-179 straight and RSB-310-1-179 right angle crimp plugs feature standard snap-on coupling with gold plated contacts and body. RSB-350-1, vertical, and RSB-355-1, right...
Read More »
TNC Connectors meet FCC Part 15.
Crimp connectors satisfy requirements of FCC part 15 by reversing contacts within standard connector body. RP-1216-I connector has TNC male pin and interface dielectric in TNC female body, and RP-1202-I has TNC female contact and dielectric in TNC male body. Both RP-1216-I and the RP-1202-I crimp connectors are for use with 2TV-400, LMR-400-UF, WBC-400 and Belden 9913 coaxial cables. They are...
Read More »
Crimping Tools suit large diameter coaxial cables.
RFA-4009-20 crimp tool handle delivers piston-driven compression for installation of crimp ferrules on large diameter cables. Ratchet mechanism is designed to release only after ferrule is completely crimped. RFA-4009-01 die set has .610 in. hex cavity for use with .600 in. diameter cable. RFA-4009-02, for use with .400 in. diameter cable, features .429 in. hex cavity for ferrules and .118 in....
Read More »
Coaxial Connector will not vibrate loose.
Series 1.0/2.3 coaxial connector interface delivers RF performance in switching equipment operating at frequencies up to 4 GHz. Its push-pull coupling mechanism allows installation and de-coupling, and will not accidentally disconnect. These 50 ohm connectors have working voltage ratings of 250 Vrms and dielectric withstanding voltage rating of 750 Vrms. Straight and right angle connectors have...
Read More »
SMA Connectors support frequencies up to 18 GHz.
RS-3232-1 SMA male connector and RSA-3279-10 SMA female connector are made of gold-plated machined brass with gold-plated contacts and Teflon insulation. Panel-mount connectors have 0.500 in. square, 4-hole flanges with holes 0.339 in. on center. Machined Teflon insulation extends 0.126 in. with 0.085 in. dia. Gold-plated .012 in. dia solder post extends .051 in. from dielectric material. Each...
Read More »
Precision 2.92 mm Connector suits 40 GHz applications.
Model RF29M-SR1 consists of 50 ohm, 2.92 mm precision connector that can be used up to 46 GHz. It conforms to IEEE 287 standard, is mechanically compatible with SMA and 3.5 mm connectors, and features shortened male pin that ensures non-destructive mating process. Designed for .085 in., semi-rigid and high-performance flexible cable assemblies, product has gold-plated body and pin with molded...
Read More »
Panel-Mount Connectors suit high-frequency applications.
Two-hole, SMA connectors are fabricated to MIL-STD-348A, Section 310 with nickel- or gold-plated brass bodies, Teflon insulation, and gold-plated contacts. Model RSA-3261 SMA jack and Model RSA-3221 SMA plug have solder cups, while Models RSA-3262, RSA-3268, and RSA-3269 have solder posts with flush and extended dielectric terminations. Connectors are suitable for microwave applications where...
Read More »
Installation Tools have multiple function capabilities.
Cutters, able to cut small wire and coax through aluminum and copper cable, handle wire sizes from 2 AWG to 250 mmÃ-². Strippers handle wire as small as 30 AWG and as large as 10 AWG, coaxial cables to .600 in. dia, multi-conductor cables, and various CAT 5 and 6 wires and cables. Crimpers handle insulated and non-insulated terminals to 4, 6, and 8 conductor modular plugs such as RJ11, RJ12,...
Read More »
Crimp Connector complies with FCC Part 15.
Model RP-4252-B reverse polarity bulkhead crimp connector, with SMB jack body and SMB plug contact, is IEEE 802.11b Wi-Fi(TM) Compatible. Because it will not mate with standard SMB plugs, it complies with FCC Part 15. Designed for use up to 4 GHz, connector features nickel-plated brass body, gold plated contact, nickel plated hex nut and lock washer, and TeflonÃ-® insulation. Connector can be...
Read More »
Kit contains 3.5 mm RF adapters.
RFA-4031-01 kit features 3 adapters, each with 50 ohm impedance. They are made of non-magnetic 303 stainless steel, with beryllium-copper contacts supported with bead configuration. Units operate up to 34 GHz. Female contacts feature 4-slot configuration, ensuring that pressure is distributed evenly during engagement of male pin. Coaxial connectors and adapters intermate with SMA and 2.9 mm...
Read More »
SMB Connectors provide low mating and un-mating force.
SMB Series 75-Ohm Connectors include plugs, right-angle plugs, and PCB jacks for frequencies up to 4 GHz. RSB-301-179, positive-locking plug uses spring-loaded collar that must be retracted before connector will un-mate. RSB-300-1-179 straight and RSB-310-1-179 right angle crimp plugs feature standard snap-on coupling with gold plated contacts and body. RSB-350-1, vertical, and RSB-355-1, right...
Read More »
TNC Connectors meet FCC Part 15.
Crimp connectors satisfy requirements of FCC part 15 by reversing contacts within standard connector body. RP-1216-I connector has TNC male pin and interface dielectric in TNC female body, and RP-1202-I has TNC female contact and dielectric in TNC male body. Both RP-1216-I and the RP-1202-I crimp connectors are for use with 2TV-400, LMR-400-UF, WBC-400 and Belden 9913 coaxial cables. They are...
Read More »
Crimping Tools suit large diameter coaxial cables.
RFA-4009-20 crimp tool handle delivers piston-driven compression for installation of crimp ferrules on large diameter cables. Ratchet mechanism is designed to release only after ferrule is completely crimped. RFA-4009-01 die set has .610 in. hex cavity for use with .600 in. diameter cable. RFA-4009-02, for use with .400 in. diameter cable, features .429 in. hex cavity for ferrules and .118 in....
Read More »
Coaxial Connector will not vibrate loose.
Series 1.0/2.3 coaxial connector interface delivers RF performance in switching equipment operating at frequencies up to 4 GHz. Its push-pull coupling mechanism allows installation and de-coupling, and will not accidentally disconnect. These 50 ohm connectors have working voltage ratings of 250 Vrms and dielectric withstanding voltage rating of 750 Vrms. Straight and right angle connectors have...
Read More »
SMA Connectors support frequencies up to 18 GHz.
RS-3232-1 SMA male connector and RSA-3279-10 SMA female connector are made of gold-plated machined brass with gold-plated contacts and Teflon insulation. Panel-mount connectors have 0.500 in. square, 4-hole flanges with holes 0.339 in. on center. Machined Teflon insulation extends 0.126 in. with 0.085 in. dia. Gold-plated .012 in. dia solder post extends .051 in. from dielectric material. Each...
Read More »