PennEngineering

New Unthreaded Standoffs from PennEngineering Designed for Quick Attachment, Removal
Fasteners & Hardware

New Unthreaded Standoffs from PennEngineering Designed for Quick Attachment, Removal

Manufactured from carbon steel in 0.125, 0.250 and 0.375 in. and in metric lengths 3, 4, 6, 8 and 10 mm. Designed to permanently mount on PCBs that enable quick attachment and removal of stacked components without using tools. Offered in barrel design that allows for stacked board or panel to be slipped easily into place and detached by sliding the components sideways and lifting off.

Read More »
New Unthreaded Standoffs from PennEngineering Designed for Quick Attachment, Removal
Fasteners & Hardware

New Unthreaded Standoffs from PennEngineering Designed for Quick Attachment, Removal

Manufactured from carbon steel in 0.125, 0.250 and 0.375 in. and in metric lengths 3, 4, 6, 8 and 10 mm. Designed to permanently mount on PCBs that enable quick attachment and removal of stacked components without using tools. Offered in barrel design that allows for stacked board or panel to be slipped easily into place and detached by sliding the components sideways and lifting off.

Read More »
PEM® Self-Clinching Nuts and Studs for Use in High-Strength Thin Steel Sheets Provide Permanent Threads for Automotive Component Attachment Applications
Architectural & Civil Engineering Products

PEM® Self-Clinching Nuts and Studs for Use in High-Strength Thin Steel Sheets Provide Permanent Threads for Automotive Component Attachment Applications

PEM® self-clinching SH™ nuts and HFLH™ studs from PennEngineering® can successfully install in high-strength thin steel sheets to provide permanent threads for mating hardware in automotive component attachment applications. These hard panel nuts and studs manufactured from hardened alloy steel ultimately exhibit stronger thread strength compared with conventional fasteners. The fasteners...

Read More »
PEM-® Self-Clinching Nuts and Studs for Use in High-Strength Thin Steel Sheets Provide Permanent Threads for Automotive Component Attachment Applications
Architectural & Civil Engineering Products

PEM-® Self-Clinching Nuts and Studs for Use in High-Strength Thin Steel Sheets Provide Permanent Threads for Automotive Component Attachment Applications

PEM® self-clinching SH™ nuts and HFLH™ studs from PennEngineering® can successfully install in high-strength thin steel sheets to provide permanent threads for mating hardware in automotive component attachment applications. These hard panel nuts and studs manufactured from hardened alloy steel ultimately exhibit stronger thread strength compared with conventional fasteners. The fasteners...

Read More »
PennEngineering Introduces PEM PreTect Thread Masking Plugs for Protection of Internal Threads of Self-Clinching Nuts
Mechanical Components and Assemblies

PennEngineering Introduces PEM PreTect Thread Masking Plugs for Protection of Internal Threads of Self-Clinching Nuts

PEM PreTect thread masking plugs from PennEngineering will protect internal threads of self-clinching nuts and standoffs during paint and powder coating processes. They have been designed to self-clinching blind standoffs, thru-hole standoffs, and nuts in thread sizes #4-40 to ¼-20 and M3 to M6. They can be augmented for thru-hole fastener types and can be removed easily using a fine tip tool....

Read More »
PennEngineering Introduces PEM PreTect Thread Masking Plugs for Protection of Internal Threads of Self-Clinching Nuts
Mechanical Components and Assemblies

PennEngineering Introduces PEM PreTect Thread Masking Plugs for Protection of Internal Threads of Self-Clinching Nuts

PEM PreTect thread masking plugs from PennEngineering will protect internal threads of self-clinching nuts and standoffs during paint and powder coating processes. They have been designed to self-clinching blind standoffs, thru-hole standoffs, and nuts in thread sizes #4-40 to ¼-20 and M3 to M6. They can be augmented for thru-hole fastener types and can be removed easily using a fine tip tool....

Read More »
SI® Inserts for Plastic Assemblies Provide Reusable Metal Threads Enabling Easy Disassembly and Re-Attachment Whenever Required
Construction Equipment and Supplies

SI® Inserts for Plastic Assemblies Provide Reusable Metal Threads Enabling Easy Disassembly and Re-Attachment Whenever Required

SI® inserts from PennEngineering® permanently install in plastic assemblies to provide durable and reusable metal threads for mating hardware and allow for repeated disassembly and re-attachment whenever required. By promoting quick and easy access to an assembly, SI inserts offer highly practical joining solutions in contrast to fixed and unyielding methods, such as adhesives or rivets....

Read More »
SI-® Inserts for Plastic Assemblies Provide Reusable Metal Threads Enabling Easy Disassembly and Re-Attachment Whenever Required
Construction Equipment and Supplies

SI-® Inserts for Plastic Assemblies Provide Reusable Metal Threads Enabling Easy Disassembly and Re-Attachment Whenever Required

SI® inserts from PennEngineering® permanently install in plastic assemblies to provide durable and reusable metal threads for mating hardware and allow for repeated disassembly and re-attachment whenever required. By promoting quick and easy access to an assembly, SI inserts offer highly practical joining solutions in contrast to fixed and unyielding methods, such as adhesives or rivets....

Read More »
PEM SFN Spinning Flare Nuts Save Assembly Time and Cost with Quick Attachment
Fasteners & Hardware

PEM SFN Spinning Flare Nuts Save Assembly Time and Cost with Quick Attachment

PEM® SFN™ Spinning Flare Nuts from PennEngineering® become permanently captive with installation in thin metal sheets. Combined with a self-clinching stud or other externally threaded hardware, they eliminate all loose fasteners. Spinning Flare Nuts are one-piece, flanged hex nuts and spin freely in a sheet allowing for quick attachment to matching hardware. They can be installed in steel,...

Read More »
PEM SFN Spinning Flare Nuts Save Assembly Time and Cost with Quick Attachment
Fasteners & Hardware

PEM SFN Spinning Flare Nuts Save Assembly Time and Cost with Quick Attachment

PEM® SFN™ Spinning Flare Nuts from PennEngineering® become permanently captive with installation in thin metal sheets. Combined with a self-clinching stud or other externally threaded hardware, they eliminate all loose fasteners. Spinning Flare Nuts are one-piece, flanged hex nuts and spin freely in a sheet allowing for quick attachment to matching hardware. They can be installed in steel,...

Read More »
New Unthreaded Standoffs from PennEngineering Designed for Quick Attachment, Removal
Fasteners & Hardware

New Unthreaded Standoffs from PennEngineering Designed for Quick Attachment, Removal

Manufactured from carbon steel in 0.125, 0.250 and 0.375 in. and in metric lengths 3, 4, 6, 8 and 10 mm. Designed to permanently mount on PCBs that enable quick attachment and removal of stacked components without using tools. Offered in barrel design that allows for stacked board or panel to be slipped easily into place and detached by sliding the components sideways and lifting off.

Read More »
New Unthreaded Standoffs from PennEngineering Designed for Quick Attachment, Removal
Fasteners & Hardware

New Unthreaded Standoffs from PennEngineering Designed for Quick Attachment, Removal

Manufactured from carbon steel in 0.125, 0.250 and 0.375 in. and in metric lengths 3, 4, 6, 8 and 10 mm. Designed to permanently mount on PCBs that enable quick attachment and removal of stacked components without using tools. Offered in barrel design that allows for stacked board or panel to be slipped easily into place and detached by sliding the components sideways and lifting off.

Read More »
PEM® Self-Clinching Nuts and Studs for Use in High-Strength Thin Steel Sheets Provide Permanent Threads for Automotive Component Attachment Applications
Architectural & Civil Engineering Products

PEM® Self-Clinching Nuts and Studs for Use in High-Strength Thin Steel Sheets Provide Permanent Threads for Automotive Component Attachment Applications

PEM® self-clinching SH™ nuts and HFLH™ studs from PennEngineering® can successfully install in high-strength thin steel sheets to provide permanent threads for mating hardware in automotive component attachment applications. These hard panel nuts and studs manufactured from hardened alloy steel ultimately exhibit stronger thread strength compared with conventional fasteners. The fasteners...

Read More »
PEM-® Self-Clinching Nuts and Studs for Use in High-Strength Thin Steel Sheets Provide Permanent Threads for Automotive Component Attachment Applications
Architectural & Civil Engineering Products

PEM-® Self-Clinching Nuts and Studs for Use in High-Strength Thin Steel Sheets Provide Permanent Threads for Automotive Component Attachment Applications

PEM® self-clinching SH™ nuts and HFLH™ studs from PennEngineering® can successfully install in high-strength thin steel sheets to provide permanent threads for mating hardware in automotive component attachment applications. These hard panel nuts and studs manufactured from hardened alloy steel ultimately exhibit stronger thread strength compared with conventional fasteners. The fasteners...

Read More »
PennEngineering Introduces PEM PreTect Thread Masking Plugs for Protection of Internal Threads of Self-Clinching Nuts
Mechanical Components and Assemblies

PennEngineering Introduces PEM PreTect Thread Masking Plugs for Protection of Internal Threads of Self-Clinching Nuts

PEM PreTect thread masking plugs from PennEngineering will protect internal threads of self-clinching nuts and standoffs during paint and powder coating processes. They have been designed to self-clinching blind standoffs, thru-hole standoffs, and nuts in thread sizes #4-40 to ¼-20 and M3 to M6. They can be augmented for thru-hole fastener types and can be removed easily using a fine tip tool....

Read More »
PennEngineering Introduces PEM PreTect Thread Masking Plugs for Protection of Internal Threads of Self-Clinching Nuts
Mechanical Components and Assemblies

PennEngineering Introduces PEM PreTect Thread Masking Plugs for Protection of Internal Threads of Self-Clinching Nuts

PEM PreTect thread masking plugs from PennEngineering will protect internal threads of self-clinching nuts and standoffs during paint and powder coating processes. They have been designed to self-clinching blind standoffs, thru-hole standoffs, and nuts in thread sizes #4-40 to ¼-20 and M3 to M6. They can be augmented for thru-hole fastener types and can be removed easily using a fine tip tool....

Read More »
SI® Inserts for Plastic Assemblies Provide Reusable Metal Threads Enabling Easy Disassembly and Re-Attachment Whenever Required
Construction Equipment and Supplies

SI® Inserts for Plastic Assemblies Provide Reusable Metal Threads Enabling Easy Disassembly and Re-Attachment Whenever Required

SI® inserts from PennEngineering® permanently install in plastic assemblies to provide durable and reusable metal threads for mating hardware and allow for repeated disassembly and re-attachment whenever required. By promoting quick and easy access to an assembly, SI inserts offer highly practical joining solutions in contrast to fixed and unyielding methods, such as adhesives or rivets....

Read More »
SI-® Inserts for Plastic Assemblies Provide Reusable Metal Threads Enabling Easy Disassembly and Re-Attachment Whenever Required
Construction Equipment and Supplies

SI-® Inserts for Plastic Assemblies Provide Reusable Metal Threads Enabling Easy Disassembly and Re-Attachment Whenever Required

SI® inserts from PennEngineering® permanently install in plastic assemblies to provide durable and reusable metal threads for mating hardware and allow for repeated disassembly and re-attachment whenever required. By promoting quick and easy access to an assembly, SI inserts offer highly practical joining solutions in contrast to fixed and unyielding methods, such as adhesives or rivets....

Read More »
PEM SFN Spinning Flare Nuts Save Assembly Time and Cost with Quick Attachment
Fasteners & Hardware

PEM SFN Spinning Flare Nuts Save Assembly Time and Cost with Quick Attachment

PEM® SFN™ Spinning Flare Nuts from PennEngineering® become permanently captive with installation in thin metal sheets. Combined with a self-clinching stud or other externally threaded hardware, they eliminate all loose fasteners. Spinning Flare Nuts are one-piece, flanged hex nuts and spin freely in a sheet allowing for quick attachment to matching hardware. They can be installed in steel,...

Read More »
PEM SFN Spinning Flare Nuts Save Assembly Time and Cost with Quick Attachment
Fasteners & Hardware

PEM SFN Spinning Flare Nuts Save Assembly Time and Cost with Quick Attachment

PEM® SFN™ Spinning Flare Nuts from PennEngineering® become permanently captive with installation in thin metal sheets. Combined with a self-clinching stud or other externally threaded hardware, they eliminate all loose fasteners. Spinning Flare Nuts are one-piece, flanged hex nuts and spin freely in a sheet allowing for quick attachment to matching hardware. They can be installed in steel,...

Read More »

All Topics