Company News

Loctite Industrial, Henkel Corp.

One Henkel Way, Rocky Hill, CT, 06067, US

Share Like Tweet Add Email

Latest New Product News from
Henkel Corporation

Adhesives & Sealants, Green & Clean

Hybrid Adhesive features structural cyanoacrylate technology.

October 1, 2014

Combining bond strength of structural epoxy with speed of instant adhesive, Loctite® 4090™ offers rapid, high-strength bonding to range of substrates, including metals, most plastics, and rubbers. Product offers impact, moisture, and UV resistance, as well as temperature resistance to 300°F. Available as 50 ml cartridge packaged with 5 mix nozzles, gel adhesive fixtures in 3-5 min when used to fill gaps up to 0.2 in. Low blooming product is suited for appearance-sensitive applications. Read More

Adhesives & Sealants, Chemical Processing & Waste Management

Structural Acrylic Adhesives can replace welds and rivets.

March 8, 2011

Designed for structural assembly of metals, especially aluminum, Loctite® H8100 and H8110 Speedbonder(TM) Adhesives are green-colored, 2-component acrylic formulas that cure at room temperature. Loctite H8100 fixtures in 20 min, while Loctite H8110 fixtures in just 5 min. Both feature glass spacer beads that maximize toughness and prevent adhesive from squeezing out of joint during clamping. Available in 50 and 490 ml dual cartridges, adhesives are stronger that spot welds and rivets. Read More

Adhesives & Sealants, Materials & Material Processing

Anaerobic Threadlocker cures through contaminants.

March 1, 2011

Suited for metal fasteners from ¼-¾ in. in diameter, Loctite® 243(TM) withstands temperatures up to 360°F, cures without primers, and tolerates contamination from thread lubrication, anti-corrosion, and protection fluids. Removable-strength, medium-viscosity, thixotropic liquid will not migrate once applied to fastener's surface. Product fixtures in 5 min and achieves full cure in 24 hr. Registered to NSF Category P1, threadlocker can be used in and around food processing applications. Read More

Adhesives & Sealants

Two-Component, Instant Adhesive fills gaps up to 5 mm wide.

June 1, 2010

Loctite 3090 is able to bond metal, plastic, rubber, and ceramic materials as well as porous substrates such as wood, paper, and cork. Two-chamber syringe packaging enables precise and clean application, and transparent gel formulation facilitates application to vertical surfaces without dripping. Working time is rated at 90-180 sec after application, and integrated static mixer ensures curing is triggered within defined timeframe. Read More

Electrical Equipment & Systems, Materials & Material Processing

UV Cure System suits benchtop production.

November 30, 2009

Loctite® Focused 400 W UV Flood Lamp cures adhesives used for bonding, potting, tacking, and sealing and emits light in UVA and UVB regions. Designed to cure 4 in. square area, unit weights about 4 lb and measures 7.5 x 4.5 x 5.8 in. Metal halide lamp also includes energy-saving standby position switch that reduces its output power by half when it is not being used. System can be used as handheld device or mounted above worksite. Expected UV lamp life is 1,000 hr. Read More

Adhesives & Sealants

Semisolid Pipe Sealant Stick does not spill or leak.

November 20, 2009

Loctite QuickStix 5671(TM) PST® seals tapered pipe thread fittings made of stainless steel, aluminum, galvanized metal, and other inert metals. Single component sealant eliminates leak paths and ensures complete contact between threads to fully seal assembly. Designed to prevent corrosion and galling in threads, this off-white anaerobic paste will not shrink or crack, ensuring long-term reliability. Self-feeding stick applicator is suitable for overhead or hard-to-reach applications. Read More

Material Handling & Storage

Anaerobic Adhesive Dispenser eliminates wasted material.

October 29, 2009

Used to dispense anaerobic flange and gasket sealants from 50 ml tubes, Loctite® 50 ml Tube Squeeze Dispenser provides smooth and consistent adhesive flow. Ergonomic, trigger-controlled dispense gun eliminates tube squeezing and provides controlled positioning of adhesives. Manually operated dispenser incorporates pivoting tray that facilitates tube changeover. Design completely empties tube, reducing adhesive waste and conserving material expenditure. Read More

Adhesives & Sealants, Chemical Processing & Waste Management, Materials & Material Processing

One-Part Silicones cure rapidly when exposed to UV/Vis light.

July 1, 2009

Comprised of 7 products, Loctite® Light Cure Silicones offer cure depths up to 2 in. and cure fully in seconds when exposed to high-powered UV or visible light. Solvent-free adhesives/sealants deliver elastic seal with optimized degradation resistance. Able to bond with silicone, plastic, and metal substrates, they exhibit weather, temperature, and moisture resistance. Uses include general bonding and sealing as well as replacing molded or die-cut gaskets and coating applications. Read More

Adhesives & Sealants

Underfill combines optimal flow, cure, and THB performance.

May 28, 2009

Hysol® UF3800(TM) exhibits lack of need for substrate pre-heat that, combined with room temperature fast flow and low-temperature curing properties, helps manufacturers improve throughput rates. Designed for use with CSP and BGA devices, halogen-free underfill has reworkable nature and offers stable electrical performance under temperature humidity bias (THB). Solution is compatible with various Pb-free and halogen-free solder pastes, providing process flexibility. Read More

Lubricants, Machinery & Machining Tools

Metal Cutting Fluids resist bacteria and foaming.

May 4, 2009

Suited for machining and grinding ferrous and non-ferrous alloys, semi-synthetic Multan® B 236(TM) and B 414(TM) can be used continuously for years with minimal biological degradation. Multan® B 236(TM) is intended for cast iron and steel, which require rapid cooling, corrosion protection, and moderate lubrication. Multan® B 414(TM) is similar but contains more oil and additional extreme pressure additives making it suited for aluminum, stainless steel, titanium, inconel, brass, or copper. Read More

Adhesives & Sealants, Chemical Processing & Waste Management

Two-Part Silicones suit potting and sealing applications.

May 4, 2009

Designed to rapidly bond dissimilar substrates, Loctite® Ultra-Clear Two-Part Silicones maintain flexibility at temperatures from -60 to 450°F. Non-corrosive products cure through large gaps and enclosed bond lines, require no primers, and offer low-odor dispensing. With elongations up to 240%, materials withstand extreme vibration, flexing, and thermal shock. Products cure to handling strength in 15 min and offer shelf lives in excess of 12 months at room temperature. Read More

Adhesives & Sealants, Chemical Processing & Waste Management, Green & Clean

Halogen-Free Adhesives suit assembly of handheld electronics.

April 3, 2009

Loctite® line of halogen-free adhesives and sealants are formulated to contain less than 900 ppm bromine and chlorine as well as 1,500 ppm total halogens. Product range includes cyanoacrylates, light cure cyanoacrylates, epoxies, urethanes, UV acrylics, silicones, hot melts, two-part acrylics, and anaerobics used for bonding, sealing, gasketing, and mounting range of components. All meet IPC IEC No. 61249-2-21 requirements. Read More

Paints & Coatings, Chemical Processing & Waste Management

Solvent-Free Resins meet VOC requirements for green coatings.

January 6, 2009

Suited for formulating industrial water-based coatings, SF18(TM) and SF26(TM) solvent-free translucent aliphatic waterborne urethane resins offer hardness, high gloss, and chemical and abrasion resistance properties. Single-component, ultra-low VOC products help formulate non-yellowing floor coatings, which have appearance of solvent-borne coatings and can be applied with no odor. Read More

Material Handling & Storage, Fluid & Gas Flow Equipment

Consumables replace disposable parts on dispensing systems.

November 7, 2008

Suited for adhesive dispensing applications, Loctite® Consumables include dispense tips, static mix nozzles, and syringe barrel components. Offered in stainless steel, tapered polyethylene, and flexible polypropylene, dispense tips feature positive locking helical thread design to ensure they stays intact. Static mix nozzles meet any 2-part adhesive dispensing requirements, while syringe barrels and components enable consistent single-component adhesive dispensing. Read More

Adhesives & Sealants

Flexible Adhesives bond dissimilar substrates.

July 31, 2008

Based on FlexTec(TM) technology, Loctite® 5510(TM) Adhesive/Sealant and Loctite® 5570(TM) Adhesive are permanently elastic, non-corrosive, primerless formulations free of solvents, isocyanates, silicones, and PVC. Available in white, grey, or black, Loctite 5510 bonds and seals simultaneously, fills gaps, resists weather and moisture, and withstands shock and impact. Loctite 5570, offered in clear or white, replaces mechanical fasteners and rivets and provides vibration and sound-dampening. Read More

Adhesives & Sealants

Anaerobic Threadlockers withstand heat and stress to 650°F.

July 25, 2008

Suited for threaded assemblies that are continuously exposed to extreme temperatures, medium-strength Loctite® 2422(TM) is designed for applications where disassembly with hand tools is desired, while high-strength Loctite® 2620(TM) requires short-term exposure to temperatures over 650°F to remove nut and bolt with hand tools. Both pastes solidify when confined between close-fitting metal surfaces in absence of air, prevent loosening from shock and vibration, and eliminate leakage. Read More

Cleaning Products & Equipment

Low-Temperature Cleaner works on all metal substrates.

July 17, 2008

Water-based and solvent-free, Bonderite® Ridoline RT-153(TM) is compatible with phosphate and phosphate-free conversion coating technologies. It can be sprayed onto aluminum, hot-dip galvanized steel, or electrogalvanized steel surfaces at room temperature, conserving energy. While formulated for use with phosphate-free nanotechnologies, cleaner can also be used on zinc, iron, and magnesium phosphate metal pre-treatment processes. Alkaline cleaner runs at temperatures up to 140°F. Read More

Adhesives & Sealants

Hot Melt Adhesives come in finger-sized packages.

June 20, 2008

Designed to replace sticky cavity packaging and associated plastic waste, select Technomelt® Adhesives come in packets that load directly into dispensing tank where packet's dry outer casing melts with adhesive. Available in EVA, polyolefin, and pressure sensitive technologies, adhesives are used to manufacture filters, packaging, pressure sensitive adhesive films, insulation, textiles, vehicles, and structures. Read More

Lubricants, Cleaning Products & Equipment, Materials & Material Processing

Lubricant freezes metal parts to penetrate rust layers.

May 15, 2008

Loctite® Freeze & Release is low-viscosity, spray-on lubricant designed to shock-freeze metal parts, allowing lubricating oils to penetrate into rust layers. It freezes seized and rusted parts to -45°F, which causes hairline cracks to form in rust layer as metal contracts, allowing lubricant to penetrate by capillary action. Threaded assemblies can be dismantled in 1-2 min and product is available in 400 ml aerosol can. Read More

Materials & Material Processing

Fast-Cure Silicone is stable in harsh environments.

April 24, 2008

Suited for wire tacking, selective sealing, vibration dampening, and rework/repair applications on PCBs, Loctite® 5210(TM) is highly thixotropic silicone material that has dispense times as little as 31 sec (2 connectors) and tack-free time of less than 5 min. Non-corrosive room temperature vulcanization (RTV) silicone material cures at room temperature and will hold its form upon dispense; there is no spreading or migration to other locations where it is not desired. Read More

Other Company News from
Henkel Corporation