Company News

Henkel Corporation

One Henkel Way, Rocky Hill, CT, 06067, USA

  • 860-571-5100

Latest New Product News from
Henkel Corporation

adhesives & sealants, chemical processing & waste management

Interior Adhesives target passenger vehicle applications.

May 13, 2016

Consisting of one-component, waterborne laminating adhesive, AQUENCE® PL 5101™ simplifies production by eliminating need to mix components, while curing on-command through heat activation. TECHNOMELT® AS 8383™, consisting of non-reactive APAO hot melt, offers multi-functional application capabilities, with effectiveness on various substrates, including acrylonitrile butadiene styrene and polypropylene. Product maintains effectiveness at temperatures up to 100°C with hanging weight up to 500 g. Read More

adhesives & sealants

Hot Melt Encapsulant offers thermal conductivity.

April 1, 2016

With ability to transfer heat through encapsulating layer, Thermally Conductive Technomelt® offers dual-function performance in single material solution. Product can be melted, molded, and cooled under low pressure, delivering encapsulation technique that protects delicate circuitry and PCB assemblies, while forming self-enclosed housing and enabling heat dissipation. Offering thermal conductivity of more than 0.5 W/m-K, product is suited for LED drivers, power supplies, and solar inverters. Read More

adhesives & sealants, material handling & storage, paints & coatings

Removable Hot Melt Material streamlines substrate coating.

March 31, 2016

Formulated to allow accelerated, precise deposition in small areas, slump-resistant Technomelt® AS 8998 is compatible with automated dispensing systems and offers peel-off approach to masking specific components or designated PCB areas that must remain free of any applied protective coatings. This silicone- and halogen-free, RoHS-compliant material, which solidifies upon cooling, ensures accurate coverage only where needed and without any material migration. Read More

chemical processing & waste management

Low-Viscosity Gap Filling Material has high thermal conductivity.

December 14, 2015

Viscosity of GAP FILLER 1400SL allows this 2-part, silicone-based, liquid gap filling material to flow in and around tight, uniquely shaped structures to fill small voids and provide thermal transfer to 1.4 W/m-K. When cured, soft material allows absorption of CTE stresses and provides mechanical shock dampening for fragile assemblies. Product cures at room temperature without any byproducts and supports accelerated curing with exposure to elevated temperature. Read More

materials & material processing

Thermal Interface Material offers EMI absorption.

August 21, 2015

With thermal conductivity of 1.0 W/m-K and EMI absorption for frequencies above 1 GHz, GAP PAD EMI 1.0 offers electronic specialists critical heat and electromagnetic energy control in flexible, gap filling product designed to exhibit exceptionally low stress on solder joints. Thermal conductivity is optimized by material’s natural tack on one side, which eliminates requirement for any thermally impeding adhesive layers and also facilitates component rework. Read More

adhesives & sealants, green & clean

Hybrid Adhesive features structural cyanoacrylate technology.

October 1, 2014

Combining bond strength of structural epoxy with speed of instant adhesive, Loctite® 4090™ offers rapid, high-strength bonding to range of substrates, including metals, most plastics, and rubbers. Product offers impact, moisture, and UV resistance, as well as temperature resistance to 300°F. Available as 50 ml cartridge packaged with 5 mix nozzles, gel adhesive fixtures in 3-5 min when used to fill gaps up to 0.2 in. Low blooming product is suited for appearance-sensitive applications. Read More

adhesives & sealants, chemical processing & waste management

Structural Acrylic Adhesives can replace welds and rivets.

March 8, 2011

Designed for structural assembly of metals, especially aluminum, Loctite® H8100 and H8110 Speedbonder(TM) Adhesives are green-colored, 2-component acrylic formulas that cure at room temperature. Loctite H8100 fixtures in 20 min, while Loctite H8110 fixtures in just 5 min. Both feature glass spacer beads that maximize toughness and prevent adhesive from squeezing out of joint during clamping. Available in 50 and 490 ml dual cartridges, adhesives are stronger that spot welds and rivets. Read More

adhesives & sealants, materials & material processing

Anaerobic Threadlocker cures through contaminants.

March 1, 2011

Suited for metal fasteners from ¼-¾ in. in diameter, Loctite® 243(TM) withstands temperatures up to 360°F, cures without primers, and tolerates contamination from thread lubrication, anti-corrosion, and protection fluids. Removable-strength, medium-viscosity, thixotropic liquid will not migrate once applied to fastener's surface. Product fixtures in 5 min and achieves full cure in 24 hr. Registered to NSF Category P1, threadlocker can be used in and around food processing applications. Read More

adhesives & sealants

Two-Component, Instant Adhesive fills gaps up to 5 mm wide.

June 1, 2010

Loctite 3090 is able to bond metal, plastic, rubber, and ceramic materials as well as porous substrates such as wood, paper, and cork. Two-chamber syringe packaging enables precise and clean application, and transparent gel formulation facilitates application to vertical surfaces without dripping. Working time is rated at 90-180 sec after application, and integrated static mixer ensures curing is triggered within defined timeframe. Read More

electrical equipment & systems, materials & material processing

UV Cure System suits benchtop production.

November 30, 2009

Loctite® Focused 400 W UV Flood Lamp cures adhesives used for bonding, potting, tacking, and sealing and emits light in UVA and UVB regions. Designed to cure 4 in. square area, unit weights about 4 lb and measures 7.5 x 4.5 x 5.8 in. Metal halide lamp also includes energy-saving standby position switch that reduces its output power by half when it is not being used. System can be used as handheld device or mounted above worksite. Expected UV lamp life is 1,000 hr. Read More

adhesives & sealants

Semisolid Pipe Sealant Stick does not spill or leak.

November 20, 2009

Loctite QuickStix 5671(TM) PST® seals tapered pipe thread fittings made of stainless steel, aluminum, galvanized metal, and other inert metals. Single component sealant eliminates leak paths and ensures complete contact between threads to fully seal assembly. Designed to prevent corrosion and galling in threads, this off-white anaerobic paste will not shrink or crack, ensuring long-term reliability. Self-feeding stick applicator is suitable for overhead or hard-to-reach applications. Read More

material handling & storage

Anaerobic Adhesive Dispenser eliminates wasted material.

October 29, 2009

Used to dispense anaerobic flange and gasket sealants from 50 ml tubes, Loctite® 50 ml Tube Squeeze Dispenser provides smooth and consistent adhesive flow. Ergonomic, trigger-controlled dispense gun eliminates tube squeezing and provides controlled positioning of adhesives. Manually operated dispenser incorporates pivoting tray that facilitates tube changeover. Design completely empties tube, reducing adhesive waste and conserving material expenditure. Read More

adhesives & sealants, chemical processing & waste management, materials & material processing

One-Part Silicones cure rapidly when exposed to UV/Vis light.

July 1, 2009

Comprised of 7 products, Loctite® Light Cure Silicones offer cure depths up to 2 in. and cure fully in seconds when exposed to high-powered UV or visible light. Solvent-free adhesives/sealants deliver elastic seal with optimized degradation resistance. Able to bond with silicone, plastic, and metal substrates, they exhibit weather, temperature, and moisture resistance. Uses include general bonding and sealing as well as replacing molded or die-cut gaskets and coating applications. Read More

adhesives & sealants

Underfill combines optimal flow, cure, and THB performance.

May 28, 2009

Hysol® UF3800(TM) exhibits lack of need for substrate pre-heat that, combined with room temperature fast flow and low-temperature curing properties, helps manufacturers improve throughput rates. Designed for use with CSP and BGA devices, halogen-free underfill has reworkable nature and offers stable electrical performance under temperature humidity bias (THB). Solution is compatible with various Pb-free and halogen-free solder pastes, providing process flexibility. Read More

lubricants, machinery & machining tools

Metal Cutting Fluids resist bacteria and foaming.

May 4, 2009

Suited for machining and grinding ferrous and non-ferrous alloys, semi-synthetic Multan® B 236(TM) and B 414(TM) can be used continuously for years with minimal biological degradation. Multan® B 236(TM) is intended for cast iron and steel, which require rapid cooling, corrosion protection, and moderate lubrication. Multan® B 414(TM) is similar but contains more oil and additional extreme pressure additives making it suited for aluminum, stainless steel, titanium, inconel, brass, or copper. Read More

adhesives & sealants, chemical processing & waste management

Two-Part Silicones suit potting and sealing applications.

May 4, 2009

Designed to rapidly bond dissimilar substrates, Loctite® Ultra-Clear Two-Part Silicones maintain flexibility at temperatures from -60 to 450°F. Non-corrosive products cure through large gaps and enclosed bond lines, require no primers, and offer low-odor dispensing. With elongations up to 240%, materials withstand extreme vibration, flexing, and thermal shock. Products cure to handling strength in 15 min and offer shelf lives in excess of 12 months at room temperature. Read More

adhesives & sealants, chemical processing & waste management, green & clean

Halogen-Free Adhesives suit assembly of handheld electronics.

April 3, 2009

Loctite® line of halogen-free adhesives and sealants are formulated to contain less than 900 ppm bromine and chlorine as well as 1,500 ppm total halogens. Product range includes cyanoacrylates, light cure cyanoacrylates, epoxies, urethanes, UV acrylics, silicones, hot melts, two-part acrylics, and anaerobics used for bonding, sealing, gasketing, and mounting range of components. All meet IPC IEC No. 61249-2-21 requirements. Read More

chemical processing & waste management, paints & coatings

Solvent-Free Resins meet VOC requirements for green coatings.

January 6, 2009

Suited for formulating industrial water-based coatings, SF18(TM) and SF26(TM) solvent-free translucent aliphatic waterborne urethane resins offer hardness, high gloss, and chemical and abrasion resistance properties. Single-component, ultra-low VOC products help formulate non-yellowing floor coatings, which have appearance of solvent-borne coatings and can be applied with no odor. Read More

fluid & gas flow equipment, material handling & storage

Consumables replace disposable parts on dispensing systems.

November 7, 2008

Suited for adhesive dispensing applications, Loctite® Consumables include dispense tips, static mix nozzles, and syringe barrel components. Offered in stainless steel, tapered polyethylene, and flexible polypropylene, dispense tips feature positive locking helical thread design to ensure they stays intact. Static mix nozzles meet any 2-part adhesive dispensing requirements, while syringe barrels and components enable consistent single-component adhesive dispensing. Read More

adhesives & sealants

Flexible Adhesives bond dissimilar substrates.

July 31, 2008

Based on FlexTec(TM) technology, Loctite® 5510(TM) Adhesive/Sealant and Loctite® 5570(TM) Adhesive are permanently elastic, non-corrosive, primerless formulations free of solvents, isocyanates, silicones, and PVC. Available in white, grey, or black, Loctite 5510 bonds and seals simultaneously, fills gaps, resists weather and moisture, and withstands shock and impact. Loctite 5570, offered in clear or white, replaces mechanical fasteners and rivets and provides vibration and sound-dampening. Read More

Other Company News from
Henkel Corporation