Jergens, Inc.
Cleveland, OH 44110
Automated System promotes quick-change clamping.
Available with hydraulic or pneumatic actuation, Zero Point Clamping System (ZPS) reduces complicated machine setup procedures to one step. Process of unlocking and removing clamping device is facilitated by eliminating need to search for bore. Its balls roll freely in form-fitting ball channel, which allows them to reposition themselves and lets heavy fixtures self-align with minimal effort. All...
Read More »Power Clamping Swing Cylinders offer smooth operation.
Power Clamping Swing Cylinders feature squared tracks and pins designed for close tolerance as well as heavy-duty low-friction rods and double lip rod seals to optimize service life and eliminate leakage. Piston rotation is 90Ã-
Read More »
Jergens Expands Keylocking Thread Repair Inserts Line with MS and NAS Standards Models
June 21, 2007-Jergens, Inc. has expanded their thread repair insert line with several models meeting MS (Military Standards) and NAS (National Aerospace Standards) quality requirements. Jergens' expanded offering meets MS51830, MS51831, MS51832, NAS1394, and NAS1395 military and aerospace specifications. All Jergens keylocking inserts are easy to install with standard drills and taps-no special...
Read More »
Swing Cylinders suit workholding applications.
Available in top or bottom flange styles, hydraulically activated Swing Cylinders provide single or double-acting operation. Either style can be manifold-mounted, utilizing No. 2 SAE ports, or plumbed conventionally through two No. 4 SAE ports. Offered in 3 sizes with capacities from 1,000-5,000 lb, clamps have non-threaded bodies to facilitate mounting. Piston rotates 90Ã-
Read More »Fixture Mounting System suits automated workholding.
Combining Ball Lock mounting technology with hydraulic power, quick-change Hydraulic Ball Lock(TM) System delivers speed of hydraulic clamping with positive mechanical lock. Fixture plates are dropped onto manifold-mounted Ball Lock shanks, which are hydraulically unlocked but lock mechanically. Measuring 25 mm x .75 in., shanks will not release unless hydraulic pressure is reapplied. System both...
Read More »
New Power Clamping Cylinders Provide Direct Manifold Mounting
Eliminate Exposed Fittings and Plumbing CLEVELAND, OH - October 6, 2006 - Jergens, Inc. has announced a new series of power clamping products. Manifold Mount Cylinders are intended to provide a clean, streamlined installation by mounting directly to a manifold. This eliminates the need for exposed fittings and plumbing. The cylinders are particularly well-suited for custom designed fixtures. Six...
Read More »
Spring Plungers come in inch and metric sizes.
Made of one integral piece of steel, Solid DriveÃ-® Spring Plungers incorporate hex drive, plunger, and body. Units feature through-hardened steel tips and solid drive design that eliminates need for set screw. Shortie Spring Plungers have same features, but have screwdriver slot instead of hex drive. All Spring Plungers come in low carbon steel or stainless steel with Delrin, low carbon...
Read More »
Hydraulic Vises feature quick-change jaw system.
Providing up to 4,700 lb clamping capacity, hydraulic production vises come in 3 base styles. Ball Lock(TM) Mounting System features interlocking jigsaw pattern that permits multiple vises to closely nest together; universal base style mounts directly to machine tables; and narrow base style is designed for stand-alone fixture plate mounting. Vises include machinable, reversible jaws; hardened...
Read More »
Double-Sided Tape Dispenser delivers automated operation.
Model EZ-7000 RP automatically cuts tape to size and removes backing liner, providing ready-to-apply piece to operator. Measuring 4-½ x 5-½ x 8-½ in., product has 4 operating modes - automatic, manual, preset, and loop - and will dispense/cut most types of tape or film in lengths from 4-999 mm long. Designed to accept all tape core sizes, dispenser accommodates tape rolls with outside diameter...
Read More »Lifting Pins feature quick-connect design.
Constructed with 17-4 PH stainless steel forged lifting ring, stainless steel Kwik-Lok(TM) Lifting Pins combine positive-locking pin, push button release design with 5:1 strength factor. Products accommodate range of lifting hooks or hardware, and load spreader bar on each ring helps prevent accidental actuation. Inch sizes offer pin diameters from Ã-¼-5/8 in., grip lengths from 0.5-3.00 in.,...
Read More »Jergens, Inc. Names Bob Rubenstahl General Manager, Tooling Components Division
Cleveland, OH - Jergens, Inc. is pleased to announce the appointment of Bob Rubenstahl as General Manager for its Tooling Components Division. Mr. Rubenstahl has been with Jergens, Inc. for 2 years, previously serving as Manager of the Workholding Solutions Group. As General Manager, he will be responsible for the general management of the entire division, which is comprised of the Workholding...
Read More »Jergens, Inc. Names Patrick Rienks General Manager, Tooling Components Division
Cleveland, OH - Jergens, Inc. is pleased to announce the appointment of Patrick Rienks as General Manager for its Tooling Components Division. In his new role, Mr. Rienks will be responsible for the general management of the entire division, which is comprised of the Workholding Solutions Group, Specialty Fasteners Group, and Lifting Solutions Group. Mr. Rienks will report to Jack Schron, Jr.,...
Read More »Jergens, Inc. Introduces New Online Configuration Wizard for Specifying Ball Lock-® Quick Change Fixturing System
Cleveland, OH - Jergens, Inc. has extended its online capabilities once again, building on the success of its robust, industry-leading website. Available now from Jergens is the new Ball LockÃ-® Wizard, an online interactive configurator that provides simple step-by-step instructions for designing a Ball LockÃ-® Quick Change Fixturing System. Jergens' new Ball LockÃ-® Wizard,...
Read More »Jergens, Inc. Names Paul S. Kieta National Sales Manager, Workholding Solutions Group
Cleveland, OH - August 25, 2010 -Jergens, Inc. is pleased to announce the appointment of Paul S. Kieta as National Sales Manager for its Workholding Solutions Group. In his new role, Mr. Kieta will be responsible for sales activities and development of new opportunities for the company's line of workholding products in North America. In addition to overseeing the Workholding Solutions Group's...
Read More »Jergens, Inc. Recertifies to ISO 9001:2008
April 23, 2010 - Cleveland, OH - Jergens, Inc. announced today that both its TCD and ASG divisions were recertified to ISO 9001:2008, reinforcing the company's commitment to maintaining the highest possible quality standards. Jergens' TCD Division designs and manufactures tooling and workholding products, specialty fasteners, and lifting products, while the ASG Division distributes and services...
Read More »Jergens, Inc. Launches New Website
CLEVELAND, March 4 - Jergens, Inc., a global leader in workholding, lifting and fastening solutions, is pleased to announce the launch of its new website at www.jergensinc.com. The new website was designed to be a user-friendly resource to site visitors, allowing them instant access to a wide variety of information in one convenient place. We sell thousands of workholding, lifting and fastening...
Read More »
Automated System promotes quick-change clamping.
Available with hydraulic or pneumatic actuation, Zero Point Clamping System (ZPS) reduces complicated machine setup procedures to one step. Process of unlocking and removing clamping device is facilitated by eliminating need to search for bore. Its balls roll freely in form-fitting ball channel, which allows them to reposition themselves and lets heavy fixtures self-align with minimal effort. All...
Read More »Power Clamping Swing Cylinders offer smooth operation.
Power Clamping Swing Cylinders feature squared tracks and pins designed for close tolerance as well as heavy-duty low-friction rods and double lip rod seals to optimize service life and eliminate leakage. Piston rotation is 90Ã-
Read More »Jergens, Inc. Acquires Bock Workholding Inc.
November 13, 2008-Cleveland, Ohio-Jergens, Inc., one of the world's largest manufacturers of standard tooling components, vises, and other workholding equipment, announced that it has acquired Bock Workholding Inc. Bock, with U.S. headquarters in Ford City, Pa., and sales partners in Europe, Asia, and Australia, is a manufacturer and distributor of workholding solutions designed to improve the...
Read More »Jergens, Inc. Names Eric Van Steenlandt Director of Sales and Marketing
August 5, 2008-Cleveland, Ohio-Jergens, Inc. is pleased to announce the appointment of Eric Van Steenlandt as Director of Sales and Marketing. In his new capacity, Mr. Van Steenlandt will be responsible for all of Jergens' sales and marketing activities in North America. His staff includes 18 direct sales and manufacturers' representatives as well as product managers and support personnel. He...
Read More »