Company News

Heyco Products

1800 Industrial Way N., Toms River, NJ, 08755, USA

  • 732-286-4336

General Information:
Colleen Faulknor
Phone: 800-526-4182

Latest New Product News from
Heyco Products

material handling & storage, fasteners & hardware, green & clean

Stainless Steel Cable Clamps resist corrosion.

November 6, 2013

Designed to clamp cable or tubing securely into place, Heyco® Stainless Steel Cable Clamps come in standard corrosion-resistant 304 SS and insulated LDPE-coated 304 SS. Both have smooth coined clamp edges to prevent damage to cable insulation, and are designed for .203 in. mounting hold diameters. LDPE clamp, featuring FDA food contact approval, is coated with polyolefin, which is non-toxic and odorless with low temperature flexibility. Read More

electrical equipment & systems

Modular Connector System fosters flexible lighting installation.

January 16, 2013

Designed for 120 V, 7 A use, Heyco® Modular Connector System helps reduce labor when plugging light fixtures together as well as making end-to-end connections in coves or under cabinets and end-to-side connections to make 90° turns. System's 5/8 in. dia, keyed-3 conductor male and female connectors aid in plugging light fixtures together, while snap-in construction enables insertion into DD holes without rotation. Daisy chaining capabilities are supported. Read More

fasteners & hardware, fluid & gas flow equipment

UL-Recognized Plugs also serve as liquid-tight bushings.

November 20, 2012

Designed for 020–.063 in. thick panels and mounting hole diameters of .500–1.093 in., HEYCo-molded™ Liquid Tight Break-Thru Plugs consist of co-molded nylon and elastomer parts. They function as liquid tight plugs with IP 67/68 rating and may also be pierced by round wire, cable, or tubing to function as liquid tight bushings with same resulting IP rating. Locking fingers snap into holes in fractional increments via fingertip pressure and withstand push back force greater than 35 lb. Read More

mounting & attaching products

Liquid Tight Cordgrips come in straight-thru and pigtail designs.

November 12, 2012

Heyco®-Tite Straight-Thru Snap-In-2® Liquid Tight Cordgrips handle flexible cords with .065-1.000 in. dia, while Pigtail versions are suitable for .065-.709 in. dia cords. Both products fit panels from .062-.125 in. thick. Providing liquid tight strain relief protection, they ensure IP 65 and IP 67 seal, have 94V-2 flammability rating, and operate over -22°F to +212°F temperature range. Units are constructed of nylon 6/6 with Buna N or TPE sealing gland and install with no tools or locknuts.<br /> Read More

material handling & storage, mounting & attaching products

Rubber Bumpers prevent equipment from sliding or moving.

July 24, 2012

Designed for through hole installation, 60-70 durometer Rubber Pocket Bumpers come in 29 sizes from .500-2.500 in. to accommodate various mounting holes and panel thicknesses. These vibration dampening products, constructed of Styrene Butadiene (SBR), operate over temperature range of -40 to +221°F. Read More

fasteners & hardware

Thin Panel Bushings convert raw-edged holes into smooth holes.

June 25, 2012

Made from nylon 6/6, Thin Panel Bushings are designed for panels as thin as .020 in. and are available for .218-.875 in. diameter holes. Bushings feature locking fingers that snap into holes with fingertip pressure in fractional increments up to maximum panel thickness, and can withstand push back force of greater than 35 lb. In addition to creating smooth insulated holes, bushings insulate and mechanically protect electrical/telecommunications cables, tubing, hose, and rope. Read More

electrical equipment & systems, fluid & gas flow equipment, material handling & storage

IP68 Cordgrips provide liquid-tight strain relief protection.

June 1, 2012

Heyco®-Tite Hybrid Liquid Tight Cordgrips enable different diameters of cable to be inserted in same gland. Moveable and segmented nylon fingers provide large clamping and sealing areas and compress around gland and wire when tightened using Cordgrip's compression nut to provide torsion-proof seal. Nickel-plated brass enclosure provides corrosion resistance and durability, while molded TPE gland protects flexible cables. Sizes are available for flexible cord diameters from .04-2.17 in. Read More

fluid & gas flow equipment

Liquid Tight Fittings work with 3/8-1 in. corrugated tubing.

March 26, 2012

Available in Straight-Thru and 90° Sweep styles with NPT threaded hubs, Heyco-Flex(TM) III Liquid Tight Fittings for flexible, nonmetallic, liquid-tight tubing are UV-resistant and nontoxic. Products, designed to accelerate and facilitate installation, provide permanent assembly. Nominally rated for NEMA Type 3R applications, fittings are rated for NEMA 4 and 4X applications when used with Heyco-Flex III Tubing and can be used in wet/dry conditions and high-vibration or flexing applications. Read More

fluid & gas flow equipment

Threaded Hole Plugs suit hydraulic and pneumatic applications.

February 27, 2012

Available with NPT, PG, and Metric Hubs, Threaded Hole Plugs provide liquid-tight seal up to 70 psi, are IP68-rated, and feature integral sealing ring that provides seal at mounting hole location to protect against contamination and moisture. Plugs are available to fit multiple hole sizes and feature hex-shaped head with slot for wrench or screwdriver. Constructed from electrically non-conductive Nylon 6/6, non-corrosive plugs resist oil and heat up to 221°F. Read More

electrical equipment & systems

UV Protected Cable Ties suit solar installations.

September 23, 2011

Designed to handle cable bundles ranging from 2.30-4.20 in. in diameter, SunBundler(TM) Cable Ties are constructed from aircraft grade stainless wire with UV protected vinyl jacket that prevents damage to cable insulation. Tin-plated copper crimp sleeve permits field installation. Standard wire cutters can be used to both crimp sleeve and cut excess wire. Read More

electrical equipment & systems, fasteners & hardware, green & clean

Cable Clips enhance PV module wire management.

August 19, 2011

Manufactured from corrosion-resistant 304 SS, HEYClip(TM) SunRunner(TM) clips aid PV module wire management. Products fit module frames up to .125 in. thick and features double-compression design that accommodates from one 12 gauge USE-2 to two 10 gauge PV-1000 solar wires. Also designed for use with other cables from .20-.30 in. dia, clips have smooth edges that prevent damage to cable insulation as well as locking tabs that securely fasten product to module extensions or other panels. Read More

fasteners & hardware, mounting & attaching products

Reducer Snap Bushings suit through-panel applications.

July 11, 2011

Designed for mounting hole diameters from .375-2.0 in. and panel thicknesses up to .125 in., Reducer Snap Bushings insulate and mechanically protect electrical and telecommunications cables, tubing, hose, rope, and utility lines. Products also provide neater look where cable OD to bushing ID clearance is minimized. Manufactured from 6/6 nylon in standard black color, bushings insert into mounting holes with fingertip pressure and withstand push back force of 35 lb. Read More

electrical equipment & systems, green & clean

Potted Junction Boxes meet solar application demands.

May 16, 2011

In applications that require diodeless junction box, PVB 001 can be used with USE-2 and 1000V PV wire and features 2-piece construction. Low-profile design minimizes use of potting material while permitting ample access for electrical connections. Constructed of high-temperature polycarbonate with 5 VA and UL F1 ratings to withstand outdoor exposure with excellent cold impact performance, junction box has lid that securely snaps on without tools to accelerate panel fabrication. Read More

fasteners & hardware

Nylon Bushings with Smooth Bore protect panel through-holes.

April 14, 2011

Designed for 0.500-1.093 in. dia mounting hole and .062-.125 in. panel thickness, Smooth Bore Bushings eliminate sharp through-hole edges to protect wires and may also be used as bushings for rotating shafts. Manufacture is of 6/6 nylon, and standard color is black. Inserted into mounting holes with fingertip pressure, products features extra internal insulating sleeve that creates smooth bore and prevents locking fingers from protruding into bushing ID. Read More

fluid & gas flow equipment

Hole Plugs are available in multiple sizes and colors.

August 11, 2010

Hole plugs are offered for round, oval, rectangular, square, and "Double D" holes in any color, and can fit into variety of panel thicknesses and diameters. Manufactured in variety of materials including 6/6 nylon and polycarbonate, they can be used to close unneeded panel holes and install with fingertip pressure, lock into panels securely, come in matte or gloss finishes, and are offered in dome, vented, louvered, and specialty window plug designs. Read More

mounting & attaching products

Right Angle Cord Grips offer liquid-tight strain relief.

August 6, 2010

Available in PG, NPT, and metric threads in variety of sizes, Right Angle Cord Grips feature all nylon construction with Buna N sealing gland that resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Each is molded in open position to facilitate installation. After cable insertion, fitting snaps closed while bending cable without damage. UL and CSA certified, cord grips are suitable for NEMA 6P enclosures and have 94V-2 flammability rating. Read More

electrical equipment & systems, fluid & gas flow equipment

Nylon Conduit Fittings require no threading for installation.

July 7, 2010

Flexilok Nylon Conduit Fittings are one-piece units designed for use with both course and/or fine pitch conduit or tubing. Products are halogen-, sulphur-, and phosphorous-free, UV-resistant, and low fire hazard. Available in PG and metric hubs, all nylon construction of fittings resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents; is IP 66 rated; and has temperature range of -58 to +275°F. Read More

mounting & attaching products

Solar Cordgrips replace rooftop combiner boxes.

June 2, 2010

Providing watertight seal for PV module output leads to inverters, Masthead(TM) II Cordgrips are constructed of UV resistant nylon with TPE or Buna N Sealing Gland to resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. They also meet 94 V-2 flammability and IP68 ratings, and have temperature rating of -22 to 212°F. Provided with assembled metal locknut and NPT threads, cordgrips can be attached directly to rigid (PVC) or EMT-type conduit via adapter. Read More

fasteners & hardware, mounting & attaching products

Ratcheting Strain Relief features removable design.

April 21, 2010

Designed to self-lock onto cable, Snap-In Ratcheting Strain Relief can be removed through insertion of snap ring pliers with .040 in. tips into holes located on outside of part. Unit is available for .875 in. hole size with .770 in. flats and installs with fingertip pressure. Wire locking ratchet allows for wire range of .115-.575 in. Suited for one or multiple round or flat wire cables, strain relief can be preassembled offline for final assembly at later time. Read More

electrical equipment & systems, green & clean

Junction Boxes target double ribbon PV panels.

March 19, 2010

Specifically designed for manufacturers of single diode, double ribbon photovoltaic panels, PVB-101 Junction Boxes feature low-profile design that maximizes usable solar panel collector space. Units have internal volume and venting for optimal thermal dissipation, cable strain relief, and ambient temperature range of -40 to 105°C. Boxes are IP65-rated, UL approved, and TUV certification-pending. Read More

Other Company News from
Heyco Products