Company News

Hendrickson Trailer Commercial Vehicle Systems

2070 Industrial Place S.E., Canton, OH, 44707, USA

  • 866-RIDEAIR

Latest New Product News from
Hendrickson Trailer Commercial Vehicle Systems

Materials & Material Processing, Mechanical Power Transmission

Air Suspension and Axle Systems are designed for truck cranes.

March 11, 2017

Hendrickson’s Air Suspension and Axle Systems provide improved ride quality and driver handling. Front suspension and axle system comes with STEERTEK NXT fabricated axle. Having 30,000 lb per axle capacity, rear air suspension features QUIK-ALIGN®. Front air suspension and axle systems are available with 48000 lb capacity whereas rear suspension with 60000 lb capacity.

Read More

Fasteners & Hardware

End Bushings minimize installation efforts.

December 14, 2010

Intended for use with company's proprietary walking beams, part No. 34013-188L rubber rotating bar pin end bushing conserves installation time by eliminating need to pay attention to bar pin angle. Once pressed in, bar pin can be turned with shop wrench or similar tool to required axle angle. Product includes set of shims to facilitate axle alignment as well as required fasteners to complete... Read More

Mounting & Attaching Products

Aerodynamic Non-Metal Bumper targets heavy-duty vehicles.

September 8, 2010

Made from fully recyclable materials, AERO GUARD(TM) Bumper employs heavy-duty structural ribbing and extra-thick fascia in unified structure that provides cold-impact durability down to -40°. Molded-in-color, 2-piece, middle-split bumper is engineered to work with factory tilt mechanism, and can be installed and replaced with no down time or painting. Read More

Transportation Industry Products

Lighter-Weight Trailer Suspension supports up to 23,000 lb.

March 7, 2008

INTRAAX® AANL low-ride/liftable integrated trailer suspension system uses Advanced Axle/Beam Technology (AXT(TM)), which pairs tapered-beam and Large-Diameter Axle (5 ¾ in.) features to optimize component system strength while minimizing weight. Offered in ride heights from 6.5-17 in., it features axle/spindle assembly with straightness that promotes fuel economy and tire life.... Read More

Fluid & Gas Flow Equipment, Transportation Industry Products

Height Control and Dump Valve helps load/unload trailers.

August 6, 2007

Integral height control valve (HCV) and automatic dump valve helps maintain load stability over the road and facilitates loading dock activity. Triggered by trailer parking brake, valve automatically discharges with setting of brake and begins air up of springs with release of brake. Unit features high-flow design for dumping and filling and is available in kits that include 3/8 in. tube fittings... Read More

Mechanical Power Transmission

Chassis Axle serves intermodal applications.

July 10, 2007

With 22,500 lb capacity, 5 in. round Hendrickson Chassis Axle(TM) features one-piece axle bar with hot-formed spindles and axle filter for internal venting. It has rigid forged steel spiders, and 16.5 x 7 in. brakes. Hardened machined cam heads, journals, and splines, plus oil-impregnated bronze spider bushing provide durability. Axle comes fully dressed with standard package including e-coated... Read More

Transportation Industry Products

Trailer Suspension System offers ride heights from 6.5-17 in.

March 2, 2007

INTRAAX® AANL 23K low-ride/liftable integrated trailer suspension system features 23,000 lb capacity and brings tapered-beam and large-diameter axle (LDA(TM)) technologies to drop-decks, lowboys, platforms, tankers, bottom dumps, and specialty trailers. Tapered-beam design uses TRI-FUNCTIONAL® III bushings with phosphate-coated inner metal for corrosion resistance, and straight axle design... Read More

Transportation Industry Products

Single-Axle Slider carries loads up to 23,000 lb.

January 31, 2006

Suited for refrigerated and dry van trailer suspension, VANTRAAX HKANT 23K teams tapered-beams with 5¾ in. axle for strength and durability. Suspension utilizes K-2® slider box technology with low-alloy main rails and K-braces and features TRI-FUNCTIONAL® III bushings with phosphate-coated inner metal for corrosion protection. QUIK-DRAW® pneumatic, pin-pull mechanism facilitates... Read More

Transportation Industry Products

Trailer Suspension System provides 46,000 lb capacity.

August 9, 2005

VANTRAAX® HKANT 46K suspension system is suited for haulers running heavy-duty, over-the-road box and refrigerated vans. Advanced Axle/Beam Technology teams tapered-beam and large-diameter axle technologies. System comes with low-alloy main rails and K braces, as well as D-shaped locking pin and accompanying D-shaped holes in main rail. TRI-FUNCTIONAL® III bushings feature phosphate-coated... Read More

Transportation Industry Products

Slider Suspension accommodates wide-based single tires.

November 15, 2004

Offered in 54 in. wide box version, VANTRAAX® system is designed to replace dual-wheel combination with single tire. Product, available in 40,000-pound capacity with 83.5 in. axle track, incorporates INTRAAX® air suspension system and K-2® slider technology. It features K bracing and full-length pads in addition to rigid axle/beam connection combined with TRI-FUNCTIONAL® BUSHING for... Read More

Materials & Material Processing, Mechanical Power Transmission

Non-Steer Suspension suits pusher and tag positions.

February 6, 2003

Series HLR-2 lift axle is offered in short-, medium-, and long-beam versions to fit space requirements of varying truck applications and configurations. It accommodates ride heights of 8-14.5 in. Short beam version measures 29.5 in., provides 7 in. of lift, and is rated at 13,000 lb. Mid-beam version measures 33.25 in, provides 10 in. of lift, and is rated 13,000 lb. Long beam measures 37 in., is... Read More

Transportation Industry Products

Suspension System suits autohauler and drop-frame vans.

December 23, 2002

INTRAAX® AANLS 20K utilizes tapered beam technology and offers capacity of 20,000 lb. Available in ride heights from 6.25-12 in., short-beam system provides choice of 16.5 in. brakes or smaller 15 in. brake configuration needed for 19.5 in. tires. Cam Tube System enhances S-cam alignment and extends brake-bushing life. Neutral-toe axle improves tire life and fuel mileage. Tire Inflation System... Read More

Other Company News from
Hendrickson Trailer Commercial Vehicle Systems